STOP: 0x0000000A During Client Socket Disconnect

Article translations Article translations
Article ID: 156208 - View products that this article applies to.
This article was previously published under Q156208
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

SYMPTOMS

A computer running Windows NT 3.51 Server running client/server-based applications may result in a Blue Screen when the processing client socket disconnects. You may see an error message such as:
STOP: 0x0000000A (0x000020b5, 0x00000002, 0x00000001, 0x8010da81) IRQL_NOT_LESS_OR_EQUAL
NOTE: The first parameter may differ, but the fourth parameter will be the same on a uniprocessor system.

CAUSE

This problem has been identified in the Afd.sys driver. For instance, the NwLink Nwlnkspx.sys driver makes a reference to close a connection, and AFD dereferences the connection and sets the counter to zero. However, in certain instances Afd.sys does not handle the dereference properly and Afd.sys later tries to dereference the connection object again. This causes the machine to stop.

RESOLUTION

Obtain the hotfix mentioned below. This problem does not occur under Windows NT version 4.0.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.51.

A supported fix is now available, but has not been fully regression- tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Technical Support for more information.

Properties

Article ID: 156208 - Last Review: October 1, 2013 - Revision: 1.1
APPLIES TO
  • Microsoft Windows NT Server 3.51
Keywords: 
kbnosurvey kbarchive kbinterop KB156208

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com