FIX: The RNDIS host controller driver does not add an extra one-byte zero packet to the end of a message when a Windows Embedded CE 6.0 R2-based device that acts as the RNDIS host sends a message to an endpoint

Article ID: 951490 - View products that this article applies to.
Expand all | Collapse all

On This Page

SYMPTOMS

A Windows Embedded CE 6.0 R2-based device acts as a Remote Network Driver Interface Specification (RNDIS) host. When the RNDIS host sends a message to an endpoint, the RNDIS host controller driver does not add an extra one-byte zero packet to the end of the message.

This problem occurs if the following conditions are true:
  • The last REMOTE_NDIS_PACKET_MSG element of the message ends with a USB packet.
  • The length of the USB packet is the same as the value in the wMaxPacketSize field in the descriptor of the endpoint.
Back to the top | Give Feedback

RESOLUTION

Software update information

A supported software update is now available from Microsoft as Windows CE 6.0 Platform Builder Monthly Update (May 2008). You can confirm this by scrolling to the "File information" section of this article. The package file name contains the product version, date, Knowledge Base article number, and processor type. The package file name format is:
Product version-yymmdd-kbnnnnnn-processor type
For example: Wincepb50-060503-kb917590-armv4i.msi is the ARMV4i Windows CE 5.0 Platform Builder fix that is documented in KB article 917590 and that is contained in the May 2006 monthly update. To resolve this problem immediately, click the following article number for information about obtaining Windows CE Platform Builder and core operating system software updates:
837392
(http://support.microsoft.com/kb/837392/ )
How to locate core operating system fixes for Microsoft Windows CE Platform Builder products

Prerequisites

This update is supported only if all previously issued updates for this product have also been installed.

Restart requirement

After you apply this software update, you must perform a clean build of the whole platform. To clean the platform, click Clean on the Build menu. To build the platform, click Build Platform on the Build menu. You do not have to restart the computer after you apply this software update.

Update replacement information

This update does not replace any other updates.

File information

The English version of this software update package has the file attributes or the later file attributes that are listed in the following table.
Collapse this tableExpand this table
File nameFile sizeDateTime
Wincepb60-080505-kb951490-armv4i.msi649,21605-May-200821:15
Wincepb60-080505-kb951490-mipsii.msi634,36805-May-200821:15
Wincepb60-080505-kb951490-mipsii_fp.msi634,88005-May-200821:15
Wincepb60-080505-kb951490-mipsiv.msi636,92805-May-200821:15
Wincepb60-080505-kb951490-mipsiv_fp.msi636,92805-May-200821:15
Wincepb60-080505-kb951490-sh4.msi630,78405-May-200821:15
Wincepb60-080505-kb951490-x86.msi620,54405-May-200821:15
The English version of this software update package has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.
Collapse this tableExpand this table
File nameFile sizeDateTimePath
Usb8023.lib591,86228-Apr-200817:15public\common\oak\lib\armv4i\debug
Usb8023.lib276,83428-Apr-200817:15public\common\oak\lib\armv4i\retail
Usb8023.lib561,75028-Apr-200817:15public\common\oak\lib\mipsii\debug
Usb8023.lib277,85628-Apr-200817:15public\common\oak\lib\mipsii\retail
Usb8023.lib561,85828-Apr-200817:16public\common\oak\lib\mipsii_fp\debug
Usb8023.lib277,96628-Apr-200817:15public\common\oak\lib\mipsii_fp\retail
Usb8023.lib564,60228-Apr-200817:16public\common\oak\lib\mipsiv\debug
Usb8023.lib279,61628-Apr-200817:16public\common\oak\lib\mipsiv\retail
Usb8023.lib564,71028-Apr-200817:16public\common\oak\lib\mipsiv_fp\debug
Usb8023.lib279,72628-Apr-200817:16public\common\oak\lib\mipsiv_fp\retail
Usb8023.lib501,24428-Apr-200817:16public\common\oak\lib\sh4\debug
Usb8023.lib266,16428-Apr-200817:16public\common\oak\lib\sh4\retail
Usb8023.lib516,99428-Apr-200817:15public\common\oak\lib\x86\debug
Usb8023.lib270,69228-Apr-200817:15public\common\oak\lib\x86\retail
Back to the top | Give Feedback

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Back to the top | Give Feedback

MORE INFORMATION

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684
(http://support.microsoft.com/kb/824684/LN/ )
Description of the standard terminology that is used to describe Microsoft software updates
Back to the top | Give Feedback

Properties

Article ID: 951490 - Last Review: June 4, 2008 - Revision: 1.0
APPLIES TO
  • Windows Embedded CE 6.0 R2
Keywords: 
kbfix kbexpertiseadvanced kbqfe KB951490
Back to the top | Give Feedback

Give Feedback

 
Back to the topBack to the top