Article ID: 193473 - View products that this article applies to.
This article was previously published under Q193473
When a Windows 98-based computer is placed into Standby mode and then resumed, the computer may stop responding (hang) if it contains an Integrated Drive Electronics (IDE) hard disk that is accessed using Direct Memory Access ([DMA], which is also known as Bus Mastering).
When it resumes, Windows 98 issues an incorrect wakeup command sequence to an IDE hard disk that uses DMA.
This problem has been reported to occur with the following portable computers running Windows 98:
A supported fix that corrects this problem is now available from Microsoft, but has not been fully regression tested and should be applied only to computers experiencing this specific problem. To resolve this problem immediately, contact Microsoft Technical Support to obtain the fix. If you are not severely impacted by this specific problem, Microsoft recommends that you wait for the next service pack that contains this fix.
For a complete list of Microsoft Technical Support phone numbers and information on support costs, please go to the following address on the World Wide Web:
This fix should have the following file attributes (or later):
File name Version Date Time Size --------------------------------------------------------- Esdi_506.pdr 4.10.2001 9/28/98 8:01pm 24,430 bytes Ios.vxd 4.10.2001 9/28/98 8:01pm 69,478 bytes
Microsoft has confirmed this to be a problem in Microsoft Windows 98.
This problem was corrected in Windows 98 Second Edition.
For additional information about Windows 98 and Windows 98 Second Edition hotfixes, click the article number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/206071/EN-US/ )General Information About Windows 98 and Windows 98 Second Edition Hotfixes