PPT2000: Compact Disc Information Is Not Recognized If CD Player Is Running

Article translations Article translations
Article ID: 198221 - View products that this article applies to.
This article was previously published under Q198221
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

SYMPTOMS

If you point to Movies and Sounds on the Insert menu and then click Play CD Audio Track, the Start and End tracks may both be set to 1. You can manually adjust these numbers to be anything up to 100, regardless of how many tracks there are on your compact disc.

CAUSE

This symptom occurs if there is no audio compact disc in your CD-ROM drive, or if there is a compact disc in the drive and the Windows 95/98 CD Player program is running in the background.

The symptom does not occur if the Windows NT 4.0 CD Player is running in the background. In this case, the Start track is set to 1, and the End track is set to the last track on the audio compact disc.

RESOLUTION

Before you use the Play CD Audio Track command, verify the following:

  1. There is an audio compact disc in your CD-ROM drive.
  2. The Windows 95/98 CD Player program is not running.

STATUS

Microsoft has confirmed this to be a problem with the Windows 95/98 CD Player.

Properties

Article ID: 198221 - Last Review: October 11, 2013 - Revision: 1.0
APPLIES TO
  • Microsoft PowerPoint 2000 Standard Edition
Keywords: 
kbnosurvey kbarchive kbbug kbnofix kbenv kbui KB198221

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com