Select the product you need help with

Setver.exe Is Not Loadable in Windows Millennium Edition

Article ID: 250238 - View products that this article applies to.

Retired KB Content Disclaimer

This article was previously published under Q250238

Expand all | Collapse all

SYMPTOMS

If you run Setver.exe at a command prompt in Windows Millennium Edition (Me), you receive the following error message:

NOTE: Setver device not loaded. To activate Setver version reporting you must load the Setver.exe device in your Config.sys.

Back to the top | Give Feedback

CAUSE

"Device=" entries in the Config.sys file are not processed by Windows Me. Previously installed real-mode programs are not loaded at startup with Windows Me.

Back to the top | Give Feedback

STATUS

This behavior is by design.

Back to the top | Give Feedback

MORE INFORMATION

This information also affects real-mode device drivers. For assistance to obtain Windows Me-compatible device drivers for a device, contact the device manufacturer.

Back to the top | Give Feedback

Properties

Article ID: 250238 - Last Review: January 27, 2007 - Revision: 1.2

APPLIES TO

Microsoft Windows Millennium Edition

kberrmsg kbprb KB250238

Retired KB Content Disclaimer

This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.

Back to the top | Give Feedback