Consider the following scenario:
- You install the Fax Server role on a computer that is running Windows Server 2008 or Windows Server 2008 R2 .
- You configure the Fax Server role to route incoming faxes to an e-mail address.
In this scenario, the Fax Service may crash when a fax arrives. Additionally, the sender of the fax receives a notification that the fax is sent successfully. However, the fax is not routed to the specified e-mail address.
Also, the following events are logged in the Application log:
Event ID 32089Source: Microsoft Fax
Date: Date
Event ID: 32089
Task Category: Inbound
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName
Description:
The Fax Service failed to execute a specific routing method. The service will retry to route the fax according to the retries configuration. If the retries fail, verify routing method configuration.
Job ID: ID.
Received on Device: DeviceName
Sent from: ''
Received file name: FileName.
Routing extension name: 'Microsoft Routing Extension' Routing method name: 'Route through e-mail'
Event ID 32083Source: Microsoft Fax
Date: Date
Event ID: 32083
Task Category: Inbound
Level: Error
Keywords: Classic
User: N/A
Computer: ComputerName
Description:
Unable to route fax FileName to the requested e-mail address. The following error occurred: 0x80040211 This error code indicates the cause of the error. Check the SMTP server configuration, and correct any anomalies.
NoteThis problem is not specific to the Fax Server role on a computer that is running Windows Server 2008 or Windows Server 2008 R2. This problem can occur when any application or service makes some Collaboration Data Objects (CDO) calls to the Inetcomm.dll module on a computer that is running Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2.
The Fax Server role makes some CDO calls to the Inetcomm.dll module to route a fax to an e-mail address. Every time that a fax is routed, the Inetcomm.dll module is loaded and then unloaded.
However, two classes are not unregistered when this module is unloaded. If the module is reloaded at a different address, some
WndProc function calls still point to the old address. In this situation, an exception occurs because the old address is invalid. This exception causes the Fax Service to crash.
Hotfix information
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.
If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.
Prerequisites
To apply this hotfix, the computer must be running one of the following operating systems:
- Windows Vista Service Pack 1 (SP1)
- Windows Vista Service Pack 2 (SP2)
- Windows Server 2008
- Windows Server 2008 Service Pack 2 (SP2)
- Windows 7
- Windows 7 Service Pack 1 (SP1)
- Windows Server 2008 R2
- Windows Server 2008 R2 Service Pack 1 (SP1)
For more information about how to obtain a Windows Vista service pack, click the following article number to view the article in the Microsoft Knowledge Base:
935791
(http://support.microsoft.com/kb/935791/
)
How to obtain the latest Windows Vista service pack
For more information about how to obtain a Windows Server 2008 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
968849
(http://support.microsoft.com/kb/968849/
)
How to obtain the latest service pack for Windows Server 2008
Restart requirement
You do not have to restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace any other hotfix.
File information
The global version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the
Time Zone tab in the
Date and Time item in Control Panel.
Windows Vista and Windows Server 2008 file information note
Important Windows Vista hotfixes and Windows Server 2008 hotfixes are included in the same packages. However, only "Windows Vista" is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows Vista" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
- The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
Collapse this tableExpand this table
|
Version | Product | SR_Level | Service branch |
|---|
|
6.0.600
0
.
20xxx | Windows Vista | RTM | LDR |
|
6.0.600
1
.
22xxx | Windows Vista and Windows Server 2008 | SP1 | LDR |
|
6.0.600
2
.
22xxx | Windows Vista and Windows Server 2008 | SP2 | LDR |
- Service Pack 1 is integrated into the original release of Windows Server 2008.
- The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files (attributes not listed) are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows Server 2008 and of Windows Vista
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.0.6001.22473 | 738,304 | 16-Jul-2009 | 16:18 | x86 |
| Inetres.dll | 6.0.6001.22473 | 84,480 | 16-Jul-2009 | 14:17 | x86 |
| Inetcomm.dll | 6.0.6002.22175 | 738,816 | 16-Jul-2009 | 16:16 | x86 |
| Inetres.dll | 6.0.6002.22175 | 84,480 | 16-Jul-2009 | 14:06 | x86 |
For all supported x64-based versions of Windows Server 2008 and of Windows Vista
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.0.6001.22473 | 974,848 | 16-Jul-2009 | 16:40 | x64 |
| Inetres.dll | 6.0.6001.22473 | 84,480 | 16-Jul-2009 | 14:43 | x64 |
| Inetcomm.dll | 6.0.6002.22175 | 974,848 | 16-Jul-2009 | 16:16 | x64 |
| Inetres.dll | 6.0.6002.22175 | 84,480 | 16-Jul-2009 | 14:19 | x64 |
For all supported Itanium-based versions of Windows Server 2008
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.0.6001.22473 | 2,330,112 | 16-Jul-2009 | 16:23 | IA-64 |
| Inetres.dll | 6.0.6001.22473 | 84,480 | 16-Jul-2009 | 14:38 | IA-64 |
| Inetcomm.dll | 6.0.6002.22175 | 2,330,112 | 16-Jul-2009 | 16:06 | IA-64 |
| Inetres.dll | 6.0.6002.22175 | 84,480 | 16-Jul-2009 | 14:17 | IA-64 |
Windows 7 and Windows Server 2008 R2 file information notes
Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
- The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
Collapse this tableExpand this table
| Version | Product | Milestone | Service branch |
|---|
|
6.1.760
0.20xxx | Windows 7 and Windows Server 2008 R2 | RTM | LDR |
|
6.1.760
1.21xxx | Windows 7 and Windows Server 2008 R2 | SP1 | LDR |
- The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows Server 2008 R2 and for Windows 7" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows 7
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.1.7600.20879 | 740,864 | 13-Jan-2011 | 05:39 | x86 |
| Inetcomm.dll | 6.1.7601.21640 | 741,888 | 13-Jan-2011 | 05:35 | x86 |
For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.1.7600.20879 | 976,896 | 13-Jan-2011 | 06:18 | x64 |
| Inetcomm.dll | 6.1.7601.21640 | 976,896 | 13-Jan-2011 | 06:22 | x64 |
| Inetcomm.dll | 6.1.7600.20879 | 740,864 | 13-Jan-2011 | 05:39 | x86 |
| Inetcomm.dll | 6.1.7601.21640 | 741,888 | 13-Jan-2011 | 05:35 | x86 |
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Inetcomm.dll | 6.1.7600.20879 | 2,332,672 | 13-Jan-2011 | 05:24 | IA-64 |
| Inetcomm.dll | 6.1.7601.21640 | 2,332,672 | 13-Jan-2011 | 05:12 | IA-64 |
| Inetcomm.dll | 6.1.7600.20879 | 740,864 | 13-Jan-2011 | 05:39 | x86 |
| Inetcomm.dll | 6.1.7601.21640 | 741,888 | 13-Jan-2011 | 05:35 | x86 |
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684
(http://support.microsoft.com/kb/824684/LN/
)
Description of the standard terminology that is used to describe Microsoft software updates
Additional file information for Windows Vista and for Windows Server 2008
Additional files for all supported x86-based versions of Windows Server 2008 and of Windows Vista
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6001.22473_none_79f21e5171e04b44.manifest | Not Applicable | 148,164 | 16-Jul-2009 | 17:57 | Not Applicable |
| X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6002.22175_none_7bda90cd6f04d316.manifest | Not Applicable | 148,164 | 16-Jul-2009 | 17:36 | Not Applicable |
Additional files for all supported x64-based versions of Windows Server 2008 and of Windows Vista
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Amd64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6001.22473_none_d610b9d52a3dbc7a.manifest | Not Applicable | 148,224 | 16-Jul-2009 | 18:20 | Not Applicable |
| Amd64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6002.22175_none_d7f92c512762444c.manifest | Not Applicable | 148,224 | 16-Jul-2009 | 17:35 | Not Applicable |
Additional files for all supported Itanium-based versions of Windows Server 2008
Collapse this tableExpand this table
| File name | File version | File size | Date | Time | Platform |
|---|
| Ia64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6001.22473_none_79f3c24771de5440.manifest | Not Applicable | 148,194 | 16-Jul-2009 | 20:02 | Not Applicable |
| Ia64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6002.22175_none_7bdc34c36f02dc12.manifest | Not Applicable | 148,194 | 16-Jul-2009 | 17:18 | Not Applicable |
Additional file information for Windows 7 and for Windows Server 2008 R2
Additional files for all supported x86-based versions of Windows 7
Collapse this tableExpand this table
| File name | Update.mum |
| File version | Not Applicable |
| File size | 2,625 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7600.20879_none_7a1ff604d2f217ab.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:44 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21640_none_7c1dc034d0084bb5.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:44 |
| Platform | Not Applicable |
|
Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this tableExpand this table
| File name | Amd64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7600.20879_none_d63e91888b4f88e1.manifest |
| File version | Not Applicable |
| File size | 58,396 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:47 |
| Platform | Not Applicable |
|
| File name | Amd64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21640_none_d83c5bb88865bceb.manifest |
| File version | Not Applicable |
| File size | 58,396 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:47 |
| Platform | Not Applicable |
|
| File name | Update.mum |
| File version | Not Applicable |
| File size | 2,645 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7600.20879_none_7a1ff604d2f217ab.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:47 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21640_none_7c1dc034d0084bb5.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:47 |
| Platform | Not Applicable |
|
Additional files for all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
| File name | Ia64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7600.20879_none_7a2199fad2f020a7.manifest |
| File version | Not Applicable |
| File size | 58,394 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | Ia64_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21640_none_7c1f642ad00654b1.manifest |
| File version | Not Applicable |
| File size | 58,394 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | Update.mum |
| File version | Not Applicable |
| File size | 1,939 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7600.20879_none_7a1ff604d2f217ab.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
| File name | X86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.1.7601.21640_none_7c1dc034d0084bb5.manifest |
| File version | Not Applicable |
| File size | 58,392 |
| Date (UTC) | 13-Jan-2011 |
| Time (UTC) | 20:42 |
| Platform | Not Applicable |
|
Article ID: 973640 - Last Review: October 7, 2011 - Revision: 3.0
APPLIES TO
- Windows Server 2008 Standard
- Windows Server 2008 Enterprise
- Windows Server 2008 Datacenter
- Windows Server 2008 Datacenter without Hyper-V
- Windows Server 2008 Enterprise without Hyper-V
- Windows Server 2008 for Itanium-Based Systems
- Windows Server 2008 Standard without Hyper-V
- Windows Server 2008 R2 Datacenter
- Windows Server 2008 R2 Enterprise
- Windows Server 2008 R2 for Itanium-Based Systems
- Windows Server 2008 R2 Standard
- Windows Vista Business
- Windows Vista Business 64-bit Edition
- Windows Vista Enterprise
- Windows Vista Enterprise 64-bit Edition
- Windows Vista Ultimate
- Windows Vista Ultimate 64-bit Edition
- Windows 7 Enterprise
- Windows 7 Professional
- Windows 7 Ultimate
| kbautohotfix kbexpertiseinter kbsurveynew kbbug kbfix kbqfe KB973640 |
Back to the top
