Article ID: 117662 - View products that this article applies to.
This article was previously published under Q117662
IPCONFIG.EXE is a new utility included with Windows. The purpose of this utility is to provide the user with diagnostic information related to TCP/IP network configuration. IPCONFIG also accepts various Dynamic Host Configuration Protocol (DHCP) commands, allowing a system to update or release its TCP/IP network configuration.
IPCONFIG [/? | /all | /release [adapter] | /renew [adapter]]
/?: Displays this help message.With no parameters, IPCONFIG will display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP.
/all: Displays full configuration information.
/release: Releases the IP address for the specified adapter.
/renew: Renews the IP address for the specified adapter.
With the /all switch, IPCONFIG will display all the current TCP/IP configuration values including the IP address, subnet mask, default gateway and Windows Internet Naming Service (WINS) and DNS configuration.
If adapter name is not specified with either the /Release or /Renew switch, then the IP address leases for all adapters bound to TCP/IP will be released or renewed.
NOTE: The /Release and /Renew switches can only be used on a system that is configured with DHCP.
Article ID: 117662 - Last Review: February 20, 2007 - Revision: 2.2
Contact us for more help
Connect with Answer Desk for expert help.