Sign in with Microsoft
Sign in or create an account.
Hello,
Select a different account.
You have multiple accounts
Choose the account you want to sign in with.

Symptoms

After you install Microsoft Windows XP Service Pack 2 (SP2), you cannot start the Windows Firewall service. Specifically, you experience one or more of the following symptoms:

  • Windows Firewall/Internet Connection Sharing (ICS) is not displayed in the Services list in Control Panel.

  • Windows Firewall/Internet Connection Sharing (ICS) is displayed in the Services list, but you cannot start this service.

  • You receive the following error message when you try to access Windows Firewall settings:

    Due to an unidentified problem, Windows cannot display Windows Firewall settings.

Cause

This problem is caused by a missing or corrupted SharedAccess.reg file. The SharedAccess.reg file represents the Windows Firewall service.

Note The Windows Firewall service in Windows XP SP2 replaces the Internet Connection Firewall (ICF) service in earlier versions of Windows XP.

Resolution

To resolve this problem, use one of the following methods.

Method 1: Call the "Setup API InstallHinfSection" function to install Windows Firewall


To install Windows Firewall, follow these steps:

  1. Click Start, click Run, type cmd, and then click OK.

  2. At the command prompt, type the following command line, and then press ENTER:

    Rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  3. Restart Windows,

  4. Click Start, click Run, type cmd, and then click OK.

  5. At the command prompt, type the following command, and then press ENTER:

    Netsh firewall reset

  6. Click Start, click Run, type firewall.cpl, and then press ENTER. In the Windows Firewall dialog box, click On (recommended), and then click OK.

Method 2: Add the Windows Firewall entry to the registry

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

To add the Windows Firewall entry to the registry, follow these steps:

  1. Copy the following text into Notepad, and then save the file as Sharedaccess.reg:

    Windows Registry Editor Version 5.00

    [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess]
    "DependOnGroup"=hex(7):00,00
    "DependOnService"=hex(7):4e,00,65,00,74,00,6d,00,61,00,6e,00,00,00,57,00,69,00,\
    6e,00,4d,00,67,00,6d,00,74,00,00,00,00,00
    "Description"="Provides network address translation, addressing, name resolution and/or intrusion prevention services for a home or small office network."
    "DisplayName"="Windows Firewall/Internet Connection Sharing (ICS)"
    "ErrorControl"=dword:00000001
    "ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
    74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
    00,76,00,63,00,68,00,6f,00,73,00,74,00,2e,00,65,00,78,00,65,00,20,00,2d,00,\
    6b,00,20,00,6e,00,65,00,74,00,73,00,76,00,63,00,73,00,00,00
    "ObjectName"="LocalSystem"
    "Start"=dword:00000002
    "Type"=dword:00000020

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Epoch]
    "Epoch"=dword:00002cd0

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters]
    "ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\
    00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\
    69,00,70,00,6e,00,61,00,74,00,68,00,6c,00,70,00,2e,00,64,00,6c,00,6c,00,00,\
    00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\AuthorizedApplications]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\AuthorizedApplications\List]
    "%windir%\\system32\\sessmgr.exe"="%windir%\\system32\\sessmgr.exe:*:enabled:@xpsp2res.dll,-22019"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\AuthorizedApplications]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\AuthorizedApplications\List]
    "%windir%\\system32\\sessmgr.exe"="%windir%\\system32\\sessmgr.exe:*:enabled:@xpsp2res.dll,-22019"

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Setup]
    "ServiceUpgrade"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Setup\InterfacesUnfirewalledAtUpdate]
    "All"=dword:00000001

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Enum]
    "0"="Root\\LEGACY_SHAREDACCESS\\0000"
    "Count"=dword:00000001
    "NextInstance"=dword:00000001

  2. Double-click Sharedaccess.reg to merge the contents of this file into the registry and to create the Windows Firewall entry.

  3. Restart Windows.

  4. Click Start, click Run, type cmd, and then click OK.

  5. At the command prompt, type the following command, and then press ENTER:

    Netsh firewall reset

  6. Click Start, click Run, type firewall.cpl, and then click OK.

  7. Configure the Windows Firewall settings that you want to use.








If these methods do not work, reinstall Windows XP SP2.

More Information

To verify that the Windows Firewall service is started, follow these steps:

  1. Click Start, click Run, type services.msc, and then click OK.

  2. In the list of services, locate Windows Firewall/Internet Connection Sharing (ICS). Notice that the status of the service is Started.

  3. For information about how to use the Services feature, click Help on the Action menu.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

References

For more information about how to use Windows Firewall in Windows XP Service Pack 2, click the following article numbers to view the articles in the Microsoft Knowledge Base:

875357 Troubleshooting Windows Firewall settings in Windows XP Service Pack 2

892199 You cannot start the Windows Firewall service in Windows XP Service Pack 2

For more information about how to troubleshoot Windows Firewall in Windows XP SP2, visit the following Microsoft Web site:

http://technet.microsoft.com/en-us/library/bb457029.aspx

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Was this information helpful?

What affected your experience?
By pressing submit, your feedback will be used to improve Microsoft products and services. Your IT admin will be able to collect this data. Privacy Statement.

Thank you for your feedback!

×