Error 692: Hardware Failure in Port or Attached....

Article translations Article translations
Article ID: 122839 - View products that this article applies to.
This article was previously published under Q122839
Expand all | Collapse all

SYMPTOMS

When you dial a Remote Access Services (RAS) server in Windows, you may receive the following error message as the modem starts to initialize:
Error 692: Hardware failure in port or attached device.

CAUSE

This behavior can occur if any of the following conditions exists:
  • The modem is turned off or malfunctioning.
  • If you have an external modem, the serial cable is incorrect.
  • If you have an external modem, the serial cable is loose.
  • You are using a 9-to-25 pin adapter or a 25-to-9 pin adapter for the serial connection that is not wired correctly.
  • The serial port or multi-port adapter on the RAS server or client is malfunctioning.
  • The handshaking options for the modem need to be adjusted.
  • The modem is unsupported, or the chosen emulation may be incorrect.

RESOLUTION

To resolve this problem, use the appropriate method:
  • Reset your modem. Consult your hardware documentation for information about how to reset your modem.
  • If you have an external modem, ensure that you are using the proper serial cable. For more information about requirements for proper cabling, refer to the "Cabling Requirements" section in Dial-Up Networking Help.
  • If you have an external modem, ensure that the serial cable is connected securely.
  • If you are using a pin adapter to connect your external modem to your serial port, ensure that the pin adapter is wired properly for modem communication. For example, a 9-to-25 pin adapter for a mouse does not work properly with a RAS serial setup.
  • Test and replace the serial port or multi-port adapter, if necessary.
  • Ensure that the handshaking options for the modem are configured properly. Consult your hardware documentation for information about different handshaking options available for your modem.
  • Contact your modem manufacturer to see if they provide an .Inf file for your modem for your version of Windows. Also, check the latest Windows Hardware Compatibility list (HCL) to ensure that your modem is supported. For information about the Windows HCL, see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 131303
TITLE : Latest Windows 2000 and Windows NT Hardware Compatibility List (HCL)

Properties

Article ID: 122839 - Last Review: February 20, 2007 - Revision: 2.2
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
  • Microsoft Windows 2000 Datacenter Server
  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Advanced Server 3.1
Keywords: 
kbprb kb3rdparty KB122839

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com