Article ID: 123456 - View products that this article applies to.
This article was previously published under Q123456
If a GetAttributes function call is the first MS-DOS API call made following a CD-ROM disk change, MSCDEX doesn't detect that the disk is changed, so the function call reflects the contents of the previous disk. The next Open, Search, or Change Directory function call will cause MSCDEX to detect the disk change.
The MSCDEX driver fails to issue a Media Check call to the Hardware Dependent Device Driver when the GetAttributes call is made.
You can check for a CD-ROM ID file by using the C-Runtime access() function or by making direct calls to the MS-DOS Interrupt 21h. Function AX=4300h should be changed to use a file open call. Windows Applications that use the SDK OpenFile() function to detect a key file should be changed to use _lopen().
Microsoft has confirmed this to be a problem in the MSCDEX versions listed at the beginning of this article. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
The OpenFile() function in the Microsoft Windows version 3.1 SDK makes a GetAttributes function call prior to opening a file for reading if the system is running with Novell Netware loaded. The OpenFile() function fails if the GetAttributes() function fails to find the requested file. As a result, if the OpenFile() function is used to detect which CD-ROM is in the drive by opening a key file, the wrong CD-ROM may be detected following a disk change.
NOTE: Some products mentioned in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Article ID: 123456 - Last Review: October 26, 2007 - Revision: 3.1
Retired KB Content Disclaimer
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Contact us for more help