หมายเลขบทความ (Article ID): 135982 - รีวิวครั้งสุดท้าย: 6 มกราคม 2554 - Revision: 2.0

วิธีการตั้งค่า Internet Explorer จะใช้พร็อกซีเซิร์ฟเวอร์

เคล็ดลับของระบบThis article applies to a different operating system than the one you are using. Article content that may not be relevant to you is disabled.

เนื้อหาบนหน้านี้

ขยายทั้งหมด | ยุบทั้งหมด

สรุป

คุณสามารถกำหนดค่า Microsoft Internet Explorer ใช้พร็อกซี่เซิร์ฟเวอร์เพื่อเชื่อมต่อกับอินเทอร์เน็ต พร็อกซีเซิร์ฟเวอร์ที่ทำหน้าที่เป็นอุปสรรคการรักษาความปลอดภัยระหว่างเครือข่ายภายในและอินเทอร์เน็ต ให้ผู้อื่นบนอินเทอร์เน็ตจากไม่สามารถเข้าถึงข้อมูลที่อยู่บนเครือข่ายภายใน บทความนี้อธิบายถึงวิธีการตั้งค่า Internet Explorer จะใช้พร็อกซีเซิร์ฟเวอร์ผ่านการเชื่อมต่อเครือข่ายท้องถิ่น (LAN) และ proxies ที่สนับสนุน Internet Explorer แสดงรายการ

สิ่งสำคัญ: แบบกระบวนงานที่อธิบายไว้ในบทความนี้อาจต้องการข้อมูลเกี่ยวกับของพร็อกซีเซิร์ฟเวอร์ที่จัดให้มีได้ โดยผู้ดูแลระบบของคุณเท่านั้น เนื่องจากความตัว ซึ่งคุณอาจต้องติดต่อผู้ดูแลระบบของคุณก่อนที่คุณดำเนินการ

ข้อมูลเพิ่มเติม

การตั้งค่า Internet Explorer จะใช้พร็อกซีผ่าน LAN เชื่อมต่อ ใช้ขั้นตอนในส่วนที่เหมาะสม

Internet Explorer 6.0

  1. ในการเครื่องมือคลิกที่เมนูใน Internet Explorerตัวเลือกอินเทอร์เน็ตคลิกการการเชื่อมต่อแท็บ แล้วคลิกการตั้งค่า LAN.
  2. ภายใต้พร็อกซีเซิร์ฟเวอร์คลิกเพื่อเลือกนั้นใช้พร็อกซีเซิร์ฟเวอร์สำหรับระบบ LAN ของคุณกล่องกาเครื่องหมาย
  3. ในการที่อยู่กล่อง พิมพ์อยู่ IP ของพร็อกซีเซิร์ฟเวอร์
  4. ในการพอร์ตกล่อง พิมพ์หมายเลขพอร์ตที่ใช้ โดยพร็อกซีเซิร์ฟเวอร์สำหรับการเชื่อมต่อไคลเอนต์ (โดยค่าเริ่มต้น 8080)
  5. คลิกเลือกการไม่ผ่านพร็อกซีเซิร์ฟเวอร์สำหรับที่อยู่ภายในกล่องกาเครื่องหมายถ้าคุณไม่ต้องการให้คอมพิวเตอร์พร็อกซีเซิร์ฟเวอร์จะถูกใช้เมื่อคุณเชื่อมต่อกับคอมพิวเตอร์บนเครือข่ายเฉพาะที่ (ซึ่งอาจเร่งความเร็วประสิทธิภาพ)
  6. คลิกตกลงเมื่อต้องการปิดการLAN การตั้งค่ากล่องโต้ตอบ
  7. คลิกตกลงอีกครั้งเพื่อปิดการตัวเลือกอินเทอร์เน็ตกล่องโต้ตอบ

Internet Explorer 5

  1. คลิกเริ่มการทำงานชี้ไปที่การตั้งค่าคลิกแผงควบคุมแล้ว คลิกสองครั้งInternet.
  2. คลิกการการเชื่อมต่อแท็บ คลิกการตั้งค่า LANจากนั้น คลิกเพื่อเลือกนั้นใช้พร็อกซีเซิร์ฟเวอร์กล่องกาเครื่องหมาย
  3. ในการที่อยู่กล่อง พิมพ์ข้อมูลของเซิร์ฟเวอร์พร็อกซีที่เหมาะสม และใช้รูปแบบต่อไปนี้:
    http://<address> </address>
  4. คลิกขั้นสูงจากนั้น พิมพ์การตั้งค่าพร็อกซีที่เหมาะสมในแบบเซิร์ฟเวอร์พื้นที่ ใช้ไวยากรณ์ต่อไปนี้สำหรับการตั้งค่าพร็อกซี:
    http://<address>:<port> </port></address>
    โดย:<address> is the Web address of the proxy server, and <port> is the port number that is assigned to the proxy server. For example, if the proxy server's address is "proxy.example.microsoft.com" and the port number is 80, the setting in the Proxy Server box should appear like this: </port></address>
    http://proxy.example.microsoft.com:80
    สิ่งสำคัญ: ถ้าคุณใช้เครื่องหมายทับขวา (\) แทนเครื่องหมายทับ (/) ในที่อยู่พร็อกซีเซิร์ฟเวอร์ การตั้งค่าที่หายไปจากนั้นพร็อกซีเซิร์ฟเวอร์กล่องและ Internet Explorer ไม่พบพร็อกซีเซิร์ฟเวอร์

    ถ้าคุณกำลังใช้อยู่อินเทอร์เน็ตโพรโทคอล (IP) ของพร็อกซีเซิร์ฟเวอร์ของคุณ ตรวจสอบให้แน่ใจว่าไม่ให้พิมพ์ค่าศูนย์นำ For example, use 130.25.0.1 instead of 130.025.000.001.

    If you do not know the Web address or port number of the proxy server, contact your network administrator. Also, if there are any Web servers on the local network for which you want to bypass the proxy, type the appropriate host names in theDon't Use Proxy For These Addressesกล่อง For example, if you do not want to use the proxy server to obtain access to the "example.com" Web server on your LAN, typeexample.comในการDon't Use Proxy For These Addressesกล่อง

Internet Explorer 4.0, 4.01 for Windows 95 and Windows NT

  1. คลิกเริ่มการทำงานชี้ไปที่การตั้งค่าคลิกแผงควบคุมแล้ว คลิกสองครั้งInternet.
  2. คลิกการเชื่อมต่อtab, and then click to select theAccess the Internet using a proxy serverกล่องกาเครื่องหมาย
  3. คลิกขั้นสูง, and then type the appropriate proxy settings in theServersarea. Use the following syntax for the proxy settings
    http://<address>:<port> </port></address>
    โดย:<address> is the Web address of the proxy server, and <port> is the port number that is assigned to the proxy server. For example, if the proxy server's address is "proxy.example.microsoft.com" and the port number is 80, the setting in the Proxy Server box should look like this: </port></address>
    http://proxy.example.microsoft.com:80
    สิ่งสำคัญ: If you use a backslash (\) instead of a slash (/) in the proxy server's address, the settings disappear from the Proxy Server box and Internet Explorer does not find the proxy server.

    If you are using the Internet Protocol (IP) address of your proxy server, make sure that you do not type leading zeros. For example, use 130.25.0.1 instead of 130.025.000.001.

    If you do not know the Web address or port number of the proxy server, contact your network administrator. Also, if there are any Web servers on the local network for which you want to bypass the proxy, type the appropriate host names in theDon't Use Proxy For These Addressesกล่อง For example, if you do not want to use the proxy server to access the "example.com" Web server on your LAN, typeexample.comในการDon't Use Proxy For These Addressesกล่อง

Internet Explorer 4.0 สำหรับ Windows 3.1

  1. ใน Internet Explorer คลิกตัวเลือกอินเทอร์เน็ตในการมุมมองเมนู
  2. คลิกการเชื่อมต่อแท็บ
  3. คลิกขั้นสูง, and then type the appropriate proxy settings in theServersarea. Use the following syntax for the proxy settings
    http://<address>:<port> </port></address>
    โดย:<address> is the Web address of the proxy server, and <port> is the port number that is assigned to the proxy server. For example, if the proxy server's address is "proxy.example.microsoft.com" and the port number is 80, the setting in the Proxy Server box should look like this: </port></address>
    http://proxy.example.microsoft.com:80
    สิ่งสำคัญ: If you use a backslash (\) instead of a slash (/) in the proxy server's address, the settings disappear from theProxy Serverbox and Internet Explorer does not find the proxy server.

    If you are using the Internet Protocol (IP) address of your proxy server, make sure not to type leading zeros. For example, use 130.25.0.1 instead of 130.025.000.001.

    If you do not know the Web address or port number of the proxy server, contact your network administrator. Also, if there are any Web servers on the local network for which you want to bypass the proxy, type the appropriate host names in the Don't Use Proxy For These Addresses box. For example, if you do not want to use the proxy server to access the "example.com" Web server on your LAN, typeexample.comในการDon't Use Proxy For These Addressesกล่อง

Internet Explorer 3.0

  1. คลิกเริ่มการทำงานชี้ไปที่โปรแกรมชี้ไปที่เสริมชี้ไปที่Internet Toolsแล้ว คลิกGet On The Internetto start the Internet Connection Wizard.
  2. คลิกถัดไปคลิกManualแล้ว คลิกถัดไปto start the Internet Setup Wizard.
  3. คลิกถัดไปคลิกConnect Using My Local Area Networkคลิกถัดไป, and then follow the instructions in the remainder of the Internet Setup Wizard. Make sure to click to select theUse Proxy Servercheck box when it appears and type the appropriate proxy settings in theProxy Serverกล่อง Use the following syntax for the proxy settings
    http://<address>:<port> </port></address>
    โดย:<address> is the Web address of the proxy server, and <port> is the port number that is assigned to the proxy server. For example, if the proxy server's address is "proxy.example.microsoft.com" and the port number is 80, the setting in the Proxy Server box should look like this: </port></address>
    http://proxy.example.microsoft.com:80
    สิ่งสำคัญ: ถ้าคุณใช้เครื่องหมายทับขวา (\) แทนเครื่องหมายทับ (/) ในที่อยู่พร็อกซีเซิร์ฟเวอร์ การตั้งค่าที่หายไปจากนั้นพร็อกซีเซิร์ฟเวอร์กล่อง และ Internet Explorer ไม่พบพร็อกซีเซิร์ฟเวอร์

    ถ้าคุณกำลังใช้อยู่อินเทอร์เน็ตโพรโทคอล (IP) ของพร็อกซีเซิร์ฟเวอร์ของคุณ ตรวจสอบให้แน่ใจว่าไม่ให้พิมพ์ค่าศูนย์นำ ตัวอย่างเช่น ใช้ 130.25.0.1 แทนการ 130.025.000.001

    หากคุณไม่ทราบว่าเว็บแอดเดรสหรือพอร์ตจำนวนของพร็อกซีเซิร์ฟเวอร์ กรุณาติดต่อผู้ดูแลระบบของคุณ นอกจากนี้ หากมีเว็บเซิร์ฟเวอร์ใด ๆ บนเครือข่ายเฉพาะที่คุณต้องการข้ามพร็อกซี พิมพ์ชื่อโฮสต์ที่เหมาะสมในแบบอย่าใช้พร็อกซีสำหรับที่อยู่เหล่านี้กล่อง ตัวอย่างเช่น ถ้าคุณไม่ต้องการใช้พร็อกซีเซิร์ฟเวอร์การเข้าถึงเว็บเซิร์ฟเวอร์ "example.com" ในระบบ LAN ของคุณ พิมพ์example.comในการอย่าใช้พร็อกซีสำหรับที่อยู่เหล่านี้กล่อง

Internet Explorer 2.0

  1. ถ้าคุณได้เรียกใช้ตัวช่วยสร้างการตั้งค่าอินเทอร์เน็ต แล้วข้ามขั้นตอนที่ 2 ถ้าคุณไม่ได้เรียกใช้ตัวช่วยสร้างการตั้งค่าอินเทอร์เน็ต คลิกเริ่มการทำงานชี้ไปที่โปรแกรมชี้ไปที่เสริมชี้ไปที่เครื่องมือทางอินเทอร์เน็ตแล้ว คลิกตัวช่วยสร้างการตั้งค่าอินเทอร์เน็ต. ทำตามคำแนะนำในการอินเทอร์เน็ต Setup Wizard การเลือกนั้นการเชื่อมต่อ LAN โดยตรงตัวเลือกเมื่อคุณได้รับการพร้อมท์
  2. คลิกเริ่มการทำงานชี้ไปที่การตั้งค่าคลิกแผงควบคุมแล้ว คลิกสองครั้งInternet.
  3. คลิกการขั้นสูงแท็บ และคลิกเพื่อเลือกนั้นใช้พร็อกซีเซิร์ฟเวอร์กล่องกาเครื่องหมาย
  4. ในการพร็อกซีเซิร์ฟเวอร์กล่อง พิมพ์การตั้งค่าพร็อกซีที่เหมาะสม ใช้ไวยากรณ์ต่อไปนี้
    http://<address>:<port> </port></address>
    โดย:<address> is the Web address of the proxy server and <port> is the port number assigned to the proxy server. For example, if the proxy server's address is "proxy.example.microsoft.com" and the port number is 80, the setting in the Proxy Server box should look like this: </port></address>
    http://proxy.example.microsoft.com:80
    สิ่งสำคัญ: การตั้งค่าที่หายไปจากกล่องพร็อกซีเซิร์ฟเวอร์ถ้าคุณใช้เครื่องหมายทับขวา (\) แทนเครื่องหมายทับ (/) ในที่อยู่พร็อกซีเซิร์ฟเวอร์ และ Internet Explorer ไม่พบพร็อกซีเซิร์ฟเวอร์

    หากคุณไม่ทราบว่าเว็บแอดเดรสหรือพอร์ตหมายเลขของพร็อกซีเซิร์ฟเวอร์ กรุณาติดต่อผู้ดูแลระบบของคุณ

    ถ้าคุณกำลังใช้อยู่อินเทอร์เน็ตโพรโทคอล (IP) ของพร็อกซีเซิร์ฟเวอร์ ตรวจสอบให้แน่ใจว่าไม่ให้พิมพ์ค่าศูนย์นำ ตัวอย่างเช่น ใช้ 130.25.0.1 แทนการ 130.025.000.001
  5. ถ้าไม่มีเว็บเซิร์ฟเวอร์ใด ๆ บนเครือข่ายเฉพาะที่คุณต้องการข้ามพร็อกซี พิมพ์ชื่อโฮสต์ที่เหมาะสมในแบบพร็อกซีการเลี่ยงผ่านเปิดกล่อง ตัวอย่างเช่น ถ้าคุณไม่ต้องการใช้พร็อกซีเซิร์ฟเวอร์การเข้าถึงเว็บเซิร์ฟเวอร์ "example.com" ในระบบ LAN ของคุณ พิมพ์example.comในการพร็อกซีการเลี่ยงผ่านเปิดกล่อง
  6. คลิกตกลง.
โปรดสังเกตว่า Internet Explorer 2.0 ไม่สนับสนุน proxies ที่แตกต่างกันสำหรับเว็บชนิดที่แตกต่างกัน ตัวอย่างเช่น คุณไม่สามารถกำหนดค่าพร็อกซีที่แตกต่างกันสำหรับเว็บไซต์ของ File Transfer Protocol (FTP) และเว็บไซต์ที่มีโพรโทคอลการส่งผ่าน Hypertext (HTTP) อย่างไรก็ตาม Internet Explorer 3.0 สนับสนุน proxies ที่แตกต่างกันสำหรับเว็บชนิดที่แตกต่างกัน

proxies ที่ได้รับการสนับสนุน โดย Internet Explorer 3.0

Internet Explorer 3.0 สนับสนุนพร็อกซีเซิร์ฟเวอร์ต่อไปนี้:
  • V4 ซ็อก
  • proxies CERN ไปตาม
  • HTTP 1.1 รับรองความถูกต้องของพร็อกซี ด้วย CERN ไปตาม proxies
  • ssl Tunneling ด้วย proxies CERN ไปตาม
  • specialized FTP พร็อกซีสนับสนุน รวมทั้ง Gauntlet TIS และ WinGate
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use (http://go.microsoft.com/fwlink/?LinkId=151500) for other considerations.

ใช้กับ
  • Microsoft Windows 98 Standard Edition
  • Microsoft Internet Explorer 6.0
Keywords: 
kbenv kbhowto kbnetwork kbmt KB135982 KbMtth
แปลโดยคอมพิวเตอร์แปลโดยคอมพิวเตอร์
ข้อมูลสำคัญ: บทความนี้แปลโดยซอฟต์แวร์การแปลด้วยคอมพิวเตอร์ของ Microsoft แทนที่จะเป็นนักแปลที่เป็นบุคคล Microsoft มีบทความที่แปลโดยนักแปลและบทความที่แปลด้วยคอมพิวเตอร์ เพื่อให้คุณสามารถเข้าถึงบทความทั้งหมดในฐานความรู้ของเรา ในภาษาของคุณเอง อย่างไรก็ตาม บทความที่แปลด้วยคอมพิวเตอร์นั้นอาจมีข้อบกพร่อง โดยอาจมีข้อผิดพลาดในคำศัพท์ รูปแบบการใช้ภาษาและไวยากรณ์ เช่นเดียวกับกรณีที่ชาวต่างชาติพูดผิดเมื่อพูดภาษาของคุณ Microsoft ไม่มีส่วนรับผิดชอบต่อความคลาดเคลื่อน ความผิดพลาดหรือความเสียหายที่เกิดจากการแปลเนื้อหาผิดพลาด หรือการใช้บทแปลของลูกค้า และ Microsoft มีการปรับปรุงซอฟต์แวร์การแปลด้วยคอมพิวเตอร์อยู่เป็นประจำ
ต่อไปนี้เป็นฉบับภาษาอังกฤษของบทความนี้:135982  (http://support.microsoft.com/kb/135982/en-us/ )