INFO: Common Remote OLE Automation Errors

Article translations Article translations
Article ID: 141824 - View products that this article applies to.
This article was previously published under Q141824
Expand all | Collapse all

On This Page

SUMMARY

Errors raised when working with the Remote OLE Automation feature of Visual Basic 4.0, Enterprise Edition often do not include a full error description. This article gives more detail on a number of the most common errors, including possible causes and resolutions.

MORE INFORMATION

-2147023143 (&H800706d9)
There are no more endpoints available from the endpoint mapper

Common causes for this error are:

  • The Automation Manager isn't running on the server machine. Double check to make sure the server has a running instance of the Automation Manager.
  • If your server is running Windows 95, then set The Remote Automation Connection Manager's Authentication Level to "No Authentication." This is the only available setting on Windows 95.
  • The protocol specified may not be installed correctly on both the client and server machines. Determine whether the problem persists with other protocols and/or reinstall, or ensure that the protocol used is installed correctly on both machines.
  • The protocol may suffer a transient failure, even though the protocol specified was installed correctly on both machines. Rebooting the system eliminates the problem. If the problem occurs frequently, you should change protocols.

-2147418111 (&H80010001)
Call was rejected by callee

This error usually occurs when the server application is too busy to respond to the client. When a call comes into the Automation Manager, it will try to get the attention of the OLE thread for the target object. If the thread refuses the request (normally because it is busy with another request), the Automation Manager will pause and then try again. The Automation Manager will continue retrying until it succeeds or times out.

VBA error 5
Illegal Procedure Call

Visual Basic maps several OLE errors to this single error message, so there are many potential causes of this error. The most likely cause of this problem is that the registry information on the client machine is wrong. Or the registry information currently cached by the Visual Basic development environment is wrong.

For speed, Visual Basic will cache certain TypeLib and registry information. This can lead to problems in the development environment, where you are frequently building and rebuilding (and reregistering) classes.

To fix problems with the registry, shut down both the client, the server, and also the Automation Manager, and ensure that their registry entries are correct. For more information on cleaning the registry entries see the section on cleaning Registry entries at the end of this article.

This error can also occur if an application calls the Error function after getting an error. Error only understands the old 16-bit error codes and does not know how to handle 32-bit error codes. It was included in Visual Basic 4.0 to retain compatibility. Apps should use Err.Description to get the true description string, and Err.Number to get the error code.

-2147023152 (&H800706d0)
The RPC protocol sequence was not found

This can occur any time the client specifies a protocol that is not supported by the client or server machines. Most frequently this error occurs when trying to use Named Pipes to communicate with a Windows 95 server.

VBA error 429
Can't create object

This error, like VBA error 5, is a catch-all for a lot of problems and could be caused by any of the situations listed above. Most frequently, the problem is:

  • The server is not registered on the client machine.
  • The server is not correctly registered on the remote computer.
  • Remote Automation is not correctly installed on the remote computer.
  • The Remote Automation proxy is not installed correctly on the client machine.

VBA error 70
Permission denied

This error occurs when the Automation Manager refuses to create an object because of a security violation. Check the system security policy on the server machine; if it is set to the Allow by Key (2) or Allow by ACL (3), then make sure that the appropriate CLSID has the right subkey or ACL.

Winsock TSR not started

On Win 3.1 machines running LanMAN, the Winsock TSR must be started before RPC can use TCP/IP. If the TSR is not started, a system modal dialog box will appear when the client tries to connect to the server. To fix this, run Sockets.exe before starting Windows.

Object does not support OLE Automation

This error can occur when:

  1. An application has a reference to an object on a remote computer, and
  2. is trying to pass a reference to local object as a parameter of a method of the remote object, and
  3. the Automation Manager is not installed properly on the local machine.
When a reference to a local object is passed to an application on another computer, the local computer becomes a Remote Automation server, and the Automation proxy must start the Automation Manager on the local machine. If the Automation Manager is on the machine, try starting it with the command line AUTMGR32 /REGSERVER to register it.

-2147220998 (&H800401FA)
Wrong OS or OS version for application



The "Wrong OS version" error is caused by an incorrectly set InprocServer key. Each public class in a Visual Basic server has an entry in the CLSID section of the HKEY_CLASSES_ROOT registry key. Remote objects have their InprocServer (or InprocServer32) subkey set to the automation proxy. The automation proxy is Autprx32.dll for a 32-bit client on a 32-bit OS, Autprx16.dll for a 16-bit client on a 32-bit OS, and Autprx.dll for a 16- bit client on a 16-bit OS. This error can be raised when the InprocServer key is set to Autprx.dll on a 32-bit system. Because of a bug in the 16-bit Remote Automation Connection Manager on Windows 95, when an object is made remote, the InprocServer key is set incorrectly in this manner. To fix this problem, do one of the following:

  • Manually edit the InprocServer key of each affected class so that it correctly points to Autprx16.dll. -or-

  • Use the 16-bit client registration tool (Clireg16.exe) to remote your server instead of RacMan16. CliReg16 correctly detects what OS it is running under and will set the InprocServer key accurately. CliReg16 can be run from the command line with this syntax:

    clireg16 server.vbr -t server.tlb.

-2146959355 (&H80080005)
Server Execution Failed

This error is caused by an incorrectly registered Autprx16.dll. Although Setup Wizard-generated setup programs will register Autprx16.dll completely, the Visual Basic 4.0 16-bit installation does not. To fix this problem, unregister and reregister Autprx16.dll with Regsvr.exe (or Regsvr16.exe).

Other Errors

Many errors encountered while working with Remote OLE Automation are characterized by a decimal error number that is both negative and longer than a usual error number. Errors that fit this description are most commonly OLE errors that are not mapped to a specific Visual Basic error. The corresponding text for an error number like this can be found by searching for the hexadecimal equivalent of the number in the winerror.h header file that is included with Visual C++ and the Windows SDK.

The Unregister and Reregister Method of Cleaning the Registry

Generally you can clean the registry entries for a specific server by unregistering and reregistering the relevant program. However, the method used to perform these registry operations varies according to the location of the server, its bit-type, and whether it is an in-process or out-of- process server. This section will give a brief description of the tools and methods that can be used to clean the registry entries for a specific application.

Server Exe on the Server Machine

All out-of-process servers created by Visual Basic recognize the command line switches UNREGSERVER and REGSERVER. These switches can be used for servers that are run locally or remotely. To clean the registry entries for a server exe on the server machine:

  1. Run the server with the command line switch /UNREGSERVER.
  2. Run the server with the command line switch /REGSERVER.

Server Exe on a Client Machine

If the server application doesn't reside physically on a client machine, the CliRegXX tool should be used to unregister and reregister the server. The .vbr file and the .tlb file for the relevant server are needed for both operations. CliReg16 should be used for any 16-bit clients, regardless of the bit-type of the OS, and CliReg32 should be used for all 32-bit clients. To use the client registration tool to unregister and register a remote server:

  1. Run CliRegXX -u server.vbr -t server.tlb.
  2. Run CliRegXX server.vbr -t server.tlb. A dialog box will appear to prompt for the name of the remote machine and the network protocol.

Server DLL (must be local)

DLL servers do not recognize the UNREGSERVER and REGSERVER parameters. To perform registry operations with in-process servers you must use the REGSVR32.EXE tool. RegSvr32 will query the DLL for the registry information needed and perform the operation specified (either a register or an unregister). To use:

  1. Run RegSvr32 -u server.dll.
  2. Run RegSvr32 server.dll.

Properties

Article ID: 141824 - Last Review: November 3, 2003 - Revision: 2.0
APPLIES TO
  • Microsoft Visual Basic 4.0 16-bit Enterprise Edition
  • Microsoft Visual Basic 4.0 32-Bit Enterprise Edition
Keywords: 
kberrmsg kbinfo kbprogramming kblist KB141824

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com