루트 폴더에 위치한 Windows 파일 설명

기술 자료 번역 기술 자료 번역
기술 자료: 151667 - 이 문서가 적용되는 제품 보기.
모두 확대 | 모두 축소

요약

이 문서에서는 하드 디스크의 루트 폴더를 찾을 수 Windows 파일 중 일부를 설명합니다.

추가 정보

Autoexec.bat - Windows 구성 파일
   This file contains commands that should be run by Windows before
   the 32-bit portion of the operating system is started.
				

   This file is necessary only if you need to load a real-mode driver.
				

Autoexec.dos - 이전 MS-DOS Autoexec.bat 파일
   This file contains the original Autoexec.bat file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Bootlog.prv - 이전 Windows 시작 로그 파일
   This file records the progress of the previous Windows startup
   process. When you request a logged boot (or if Windows performs one
   automatically), the previous Bootlog.txt file is renamed to Bootlog.prv
   before the new Bootlog.txt file is created.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Bootlog.txt - Windows 시작 로그 파일
   This file records the progress of the Windows startup (boot)
   process. It is created if you request a logged boot, and is also
   created automatically by Windows if Windows detected that the
   previous boot was unsuccessful.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

대신 - Windows 명령줄 프로세서
   This program is the Windows command line processor.
				

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Command.dos - 이전 MS-DOS 대신 파일
   This file contains the original Command.com file from the previous
   operating system. It is used if you request to boot the previous
   operating system.
				

Config.dos - 이전 MS-DOS Config.sys 파일에
   This file contains the original Config.sys file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Config.sys - Windows 구성 파일
   This file contains parameters that describe the real-mode (16-bit)
   drivers that should be loaded into memory as part of the Windows
   startup process.
				

   This file is necessary only if you need to load a real-mode driver.
				

Cvt.log - 드라이브 변환기 (FAT32) 로그 파일
   This file is created by the Drive Converter (FAT32)
   when you convert a drive to FAT32 and may be useful
   for troubleshooting failed conversions.
				

   To remove this file, delete it from Windows Explorer.
				

Detlog.old - 이전 Windows 검색 로그 파일
   This file records the progress of the previous Windows hardware
   detection process. When you request that new hardware be detected, the
   previous Detlog.txt file is renamed to Detlog.old before the new
   Detlog.txt file is created.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Detlog.txt - Windows 검색 로그 파일
   This file records the progress of the Windows hardware detection
   process. It is created during hardware detection and is consulted by
   the hardware detection recovery process if the previous attempt to
   detect hardware caused problems.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Io.dos - 이전 MS-DOS Io.sys 파일
   This file contains the original Io.sys file from the previous operating
   system. It is used if you boot the previous operating system.
				

Io.sys - Windows MS-DOS
   This file contains Windows MS-DOS.
				

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Logo.sys - Windows 로고
   This file contains the Windows logo that is displayed as part of the
   startup process.
				

   Note that Windows 98 does not use the Logo.sys file. If you are running
   Windows 98, this file may not exist in the root folder.
				

Msdos.dos - 이전 MS-DOS Msdos.sys 파일
   This file contains the original Msdos.sys file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Msdos.sys - Windows 구성 파일
   This file contains parameters necessary for the early phases of the
   Windows startup process. For more information, please see the
   following article in the Microsoft Knowledge Base:
				

문서 ID: 118579
Windows Msdos.sys 파일의 TITLE: 목차

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Oemlog.txt - Windows OEM (주문자) 로그 파일
   This file records the progress of the Windows OEM preinstallation
   process.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Scandisk.log - %1 로그 파일
   This file is created by the ScanDisk program to record the result of
   the most recent disk scan.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Setuplog.txt - 설치 로그 파일
   This file is created by Windows Setup to record the progress of the
   installation procedure. It is consulted by Windows Setup as part of
   installation recovery.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Suhdlog.dat - 설치 로그 파일 하드 디스크
   This file contains a copy of all Master Boot Records and Partition Boot
   Records on the system both before and after the upgrade to Windows.
   This file is used by Windows Uninstall to restore the hard disk
   master boot sector as part of the uninstall process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

System.1st - 첫 번째 Windows 레지스트리
   This file contains a copy of the original registry created by Windows setup.
				

   Although this file is not necessary for the proper operation of Windows
   and can be deleted, it is recommended that the file be retained
   because it can be used to restore the registry should it become
   damaged.
				

Videorom.bin - 온보드 비디오 카드의 ROM이 복사본


   This file is used by Windows 98 to support multiple
   monitors. It is created during startup, when the system
   has only one video adapter (if the file does not already
   exist). If you delete this file, you lose support
   for multiple monitors until you remove all but your
   primary video adapter and restart Windows (so that
   this file can be re-created).
				

W95undo.dat - Windows 95 데이터 파일 제거
   This file contains a compressed backup of Windows 3.x files that were
   replaced as part of the Windows 95 installation process. It is created
   by Windows 95 Setup and is used as part of the Windows 95 uninstall
   process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

W95undo.ini - Windows 95 설치 제거 스크립트 파일
   This file contains a listing of files backed up in the W95undo.dat
   file. It is created by Windows 95 Setup and is used as part of the
   Windows 95 uninstall process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

속성

기술 자료: 151667 - 마지막 검토: 2007년 1월 19일 금요일 - 수정: 1.2
본 문서의 정보는 다음의 제품에 적용됩니다.
  • Microsoft Windows 98 Standard Edition
  • Microsoft Windows 95
키워드:?
kbmt kbinfo kbsetup KB151667 KbMtko
기계 번역된 문서
중요: 본 문서는 전문 번역가가 번역한 것이 아니라 Microsoft 기계 번역 소프트웨어로 번역한 것입니다. Microsoft는 번역가가 번역한 문서 및 기계 번역된 문서를 모두 제공하므로 Microsoft 기술 자료에 있는 모든 문서를 한글로 접할 수 있습니다. 그러나 기계 번역 문서가 항상 완벽한 것은 아닙니다. 따라서 기계 번역 문서에는 마치 외국인이 한국어로 말할 때 실수를 하는 것처럼 어휘, 구문 또는 문법에 오류가 있을 수 있습니다. Microsoft는 내용상의 오역 또는 Microsoft 고객이 이러한 오역을 사용함으로써 발생하는 부 정확성, 오류 또는 손해에 대해 책임을 지지 않습니다. Microsoft는 이러한 문제를 해결하기 위해 기계 번역 소프트웨어를 자주 업데이트하고 있습니다.

피드백 보내기

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com