位於根資料夾中的 Windows 檔案的描述

文章翻譯 文章翻譯
文章編號: 151667 - 檢視此文章適用的產品。
全部展開 | 全部摺疊

結論

本文將告訴您一些您可能會發現您的硬碟的根資料夾中的 Windows 檔案。

其他相關資訊

Autoexec.bat-Windows 設定檔
   This file contains commands that should be run by Windows before
   the 32-bit portion of the operating system is started.
				

   This file is necessary only if you need to load a real-mode driver.
				

Autoexec.dos-前一個 MS-DOS Autoexec.bat 檔
   This file contains the original Autoexec.bat file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Bootlog.prv-前一個 Windows 啟動記錄檔
   This file records the progress of the previous Windows startup
   process. When you request a logged boot (or if Windows performs one
   automatically), the previous Bootlog.txt file is renamed to Bootlog.prv
   before the new Bootlog.txt file is created.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Bootlog.txt-Windows 啟動記錄檔
   This file records the progress of the Windows startup (boot)
   process. It is created if you request a logged boot, and is also
   created automatically by Windows if Windows detected that the
   previous boot was unsuccessful.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Command.com-Windows 命令列處理器
   This program is the Windows command line processor.
				

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Command.dos-前一個 MS-DOS Command.com 檔案
   This file contains the original Command.com file from the previous
   operating system. It is used if you request to boot the previous
   operating system.
				

Config.dos-先前的 MS-DOS Config.sys 檔案
   This file contains the original Config.sys file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Config.sys-Windows 設定檔
   This file contains parameters that describe the real-mode (16-bit)
   drivers that should be loaded into memory as part of the Windows
   startup process.
				

   This file is necessary only if you need to load a real-mode driver.
				

Cvt.log-磁碟機轉換器 (FAT32) 記錄檔
   This file is created by the Drive Converter (FAT32)
   when you convert a drive to FAT32 and may be useful
   for troubleshooting failed conversions.
				

   To remove this file, delete it from Windows Explorer.
				

Detlog.old-前一個 Windows 偵測記錄檔
   This file records the progress of the previous Windows hardware
   detection process. When you request that new hardware be detected, the
   previous Detlog.txt file is renamed to Detlog.old before the new
   Detlog.txt file is created.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Detlog.txt-Windows 偵測記錄檔
   This file records the progress of the Windows hardware detection
   process. It is created during hardware detection and is consulted by
   the hardware detection recovery process if the previous attempt to
   detect hardware caused problems.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Io.dos-前一個 MS-DOS Io.sys 檔案
   This file contains the original Io.sys file from the previous operating
   system. It is used if you boot the previous operating system.
				

Io.sys-Windows MS-DOS
   This file contains Windows MS-DOS.
				

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Logo.sys-Windows 標誌
   This file contains the Windows logo that is displayed as part of the
   startup process.
				

   Note that Windows 98 does not use the Logo.sys file. If you are running
   Windows 98, this file may not exist in the root folder.
				

Msdos.dos-前一個 MS-DOS Msdos.sys 檔案
   This file contains the original Msdos.sys file from the previous
   operating system. It is used if you boot the previous operating
   system.
				

Msdos.sys-Windows 設定檔
   This file contains parameters necessary for the early phases of the
   Windows startup process. For more information, please see the
   following article in the Microsoft Knowledge Base:
				

發行項識別碼: 118579
Windows Msdos.sys 檔案的 TITLE: 內容

   This file is necessary for the proper operation of Windows and
   should not be deleted.
				

Oemlog.txt-Windows 原始設備製造商 (OEM) 記錄檔
   This file records the progress of the Windows OEM preinstallation
   process.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Scandisk.log-「 磁碟掃瞄工具 」 記錄檔
   This file is created by the ScanDisk program to record the result of
   the most recent disk scan.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Setuplog.txt-Windows 安裝程式記錄檔
   This file is created by Windows Setup to record the progress of the
   installation procedure. It is consulted by Windows Setup as part of
   installation recovery.
				

   This file is not necessary for the proper operation of Windows and
   can be deleted.
				

Suhdlog.dat-Windows 安裝程式的硬碟記錄檔
   This file contains a copy of all Master Boot Records and Partition Boot
   Records on the system both before and after the upgrade to Windows.
   This file is used by Windows Uninstall to restore the hard disk
   master boot sector as part of the uninstall process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

System.1st-Windows 第一個登錄
   This file contains a copy of the original registry created by Windows setup.
				

   Although this file is not necessary for the proper operation of Windows
   and can be deleted, it is recommended that the file be retained
   because it can be used to restore the registry should it become
   damaged.
				

Videorom.bin-一份內建視訊卡的 ROM.


   This file is used by Windows 98 to support multiple
   monitors. It is created during startup, when the system
   has only one video adapter (if the file does not already
   exist). If you delete this file, you lose support
   for multiple monitors until you remove all but your
   primary video adapter and restart Windows (so that
   this file can be re-created).
				

W95undo.dat-Windows 95 解除安裝資料檔案
   This file contains a compressed backup of Windows 3.x files that were
   replaced as part of the Windows 95 installation process. It is created
   by Windows 95 Setup and is used as part of the Windows 95 uninstall
   process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

W95undo.ini-Windows 95 解除安裝指令碼檔案
   This file contains a listing of files backed up in the W95undo.dat
   file. It is created by Windows 95 Setup and is used as part of the
   Windows 95 uninstall process.
				

   To remove this file, click "Old Windows 3.x and MS-DOS system files" in
   the Add/Remove Programs tool and then click Add/Remove.
				

屬性

文章編號: 151667 - 上次校閱: 2007年1月19日 - 版次: 1.2
這篇文章中的資訊適用於:
  • Microsoft Windows 98 Standard Edition
  • Microsoft Windows 95
關鍵字:?
kbmt kbinfo kbsetup KB151667 KbMtzh
機器翻譯
重要:本文是以 Microsoft 機器翻譯軟體翻譯而成,而非使用人工翻譯而成。Microsoft 同時提供使用者人工翻譯及機器翻譯兩個版本的文章,讓使用者可以依其使用語言使用知識庫中的所有文章。但是,機器翻譯的文章可能不盡完美。這些文章中也可能出現拼字、語意或文法上的錯誤,就像外國人在使用本國語言時可能發生的錯誤。Microsoft 不為內容的翻譯錯誤或客戶對該內容的使用所產生的任何錯誤或損害負責。Microsoft也同時將不斷地就機器翻譯軟體進行更新。
按一下這裡查看此文章的英文版本:151667
Microsoft及(或)其供應商不就任何在本伺服器上發表的文字資料及其相關圖表資訊的恰當性作任何承諾。所有文字資料及其相關圖表均以「現狀」供應,不負任何擔保責任。Microsoft及(或)其供應商謹此聲明,不負任何對與此資訊有關之擔保責任,包括關於適售性、適用於某一特定用途、權利或不侵權的明示或默示擔保責任。Microsoft及(或)其供應商無論如何不對因或與使用本伺服器上資訊或與資訊的實行有關而引起的契約、過失或其他侵權行為之訴訟中的特別的、間接的、衍生性的損害或任何因使用而喪失所導致的之損害、資料或利潤負任何責任。

提供意見

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com