3Com 快速 EtherLink 和 EtherLink III 适配器配置

文章翻译 文章翻译
文章编号: 154989 - 查看本文应用于的产品
展开全部 | 关闭全部



本文介绍了快速 3Com EtherLink 和 3Com EtherLink III 总线主适配器配置和诊断程序说明。


程序的配置部分允许您更改适配器的配置参数。这允许以适合特定的环境中已安装适配器。 诊断部分的配置和诊断程序旨在确保适配器已正确安装并且正确地在您的计算机能正常工作。组 1 测试检查物理组件、 连接符,和适配器的电路,只需要该计算机中安装适配器。组 2 测试检查将在网络上的数据传输和要求适配器连接到环回插件或一个网络适配器的能力。组合 3 测试检查正确传输和通过网络接收数据并要求该适配器连接到其设置回送服务器的网络适配器的能力。

包含要配置或测试适配器,计算机必须在运行 MS-DOS 仅。

注: 如果此计算机是一个操作服务器,通知服务器的所有用户保存他们的工作并从网络注销。配置和诊断程序中断服务器和工作站,正常的操作,因此不会被保存的工作可能会丢失。

关闭该的服务器,然后用 MS-DOS 唯一盘重新启动。这种方式没有驱动程序或 tsr 将运行时启动程序。


  • 自动,从 Install.exe 程序通过在配置和诊断子菜单中选择的选项。

  • 手动,从根目录下的 EtherDisk 磁盘的通过键入以下命令:

    3C59XCFG [命令关键字] [参数列表]

    3C59XCFG 值,该值代表 3Com 配置和诊断程序名称。 方括号表示命令关键字和参数列表是可选的。

    不带任何参数的 3C59XCFG 调用程序,在完整的 Windows 模式下。 这包括鼠标支持和上下文相关帮助。您可以按 f1 键可获取的任何时候的帮助信息。


作为一种快捷方式,您可以使用任何命令或参数的前两个字符。例如对于 3C59XCFG HE RU 意味着 3C59XCFG 帮助运行。此外,命令关键字和参数不是区分大小写。请参见下面的命令行的关键字和及其说明的列表。
   Keyword      Description
   Configure    Configures an adapter in one of three ways:
                1. Automatically with /auto parameter
                2. Using a specified adapter configuration file
                3. Using command-line configuration parameters

   Echoserver   Enables a designated adapter to function within the echo

   Help         Displays general or command-specific help information. To
                get command-specific help, type:

                   3C59XCFG Help [command keyword]

   Language     Invokes the program in full Windows mode using a specified
                external resource file. This option provides support for
                multiple languages via a different resource file for each
                language supported.

   List         Displays a list of installed adapters recognized by this
                program and their assigned adapter numbers.

   Run          Runs the diagnostic tests (which can also be specified
                from a file) on a selected adapter and writes the results
                to the screen, a file, or a printer.


The adapter can be configured in one of the following four ways, which are
described in greater detail below:

 - Full-Screen Windows Mode
 - Command Line with Auto Configuration
 - Command Line with Explicit Parameters
 - Command Line with Configuration File

   Full Screen Windows Mode

   To configure the adapter using the full-screen windowing, type


   and press ENTER. Then click Configure Adapter on the Install menu.

   Command Line Options

   Defaults: Configure has /Auto and /Adapternum:1 as defaults. For
   example, if only "3C59XCFG Configure" is used, adapter 1 will be
   automatically configured.

   /Adapternum:<N> specifies the adapter number to be configured for PCI
   and EISA computers. Run the LIST command separately to determine the
   adapter number to use here.

   /Slot:<S> specifies the physical slot number of the adapter to be
   configured in EISA computers.

   NOTE: The /Adapternum:<N> and /Slot:<S> parameters can be used with any
   of the Configure options that follow. They are both intended for use
   whenever multiple adapters are present in the computer and recognized by
   the Configuration and Diagnostic Program.

   Command Line with Auto Configuration

   Command syntax: 3C59XCFG Configure /Auto

   The /Auto parameter configures the adapter to automatically select the
   media type. All other option settings are left unchanged.

   NOTE: To set the media type, the program will attempt to detect what
   media type is being used. Therefore, you should connect to the network
   first, then run /Auto, and it will configure the media type for you.

   Command Line with Explicit Parameters

   Command syntax:  3C59XCFG Configure [/Bsize:<N> /Xcvr:<N> /Tr:<N>
                    /Fullduplex:<N> /Optimize:<N> /Linkbeat:<N>]

   Command-line configuration parameters are used to configure the adapter
   using only the option settings you specify. Some parameters are for all
   adapters, while others are for PCI only. For example, /Bsize:<N> is a
   PCI- only parameter, because with EISA adapters, the computer vendor's
   configuration utility or the option disk handles the setting of the Boot
   PROM size. In most cases, any combination of parameters can be used.
   Therefore, it is possible to modify only a few settings if needed. See
   below for a list of parameters.

      Parameter       Description

      /Bsize          Boot PROM Size (PCI only).
                      Possible values - 8, 16, 32, 64, Disabled.

      /Tr (or /Xcvr)  Transceiver (PCI only).
                      Possible values - 100BASE-TX, Tp, 10BASE-T (same as
                      Tp), Coax, Aui, External (same as Aui).

      /Optimize       Network Driver Optimization.
                      Possible values - Normal, Network, Cpu.

      /Linkbeat       Link beat enable/disable (pre-10BASE-T standard
                      Possible values - Enabled, Disabled.

                      NOTE: Try this setting ONLY if pre-10BASE-T standard
                      hubs are in use.

      /Fullduplex     Full duplex enable or disable (for 10BASE-T only).
                      Possible values - Enabled, Disabled.

                      NOTE: Enable this setting ONLY when the adapter is
                      connected to a 10BASE-T repeater supporting full
                      Otherwise, it will bring down the network.

   Command Line with Configuration File

   Command syntax: 3C59XCFG Configure /Configfile:<filename>

   This syntax is used to configure an adapter with the settings specified
   in an ASCII configuration file that can be created and modified by any
   text editor. The file name can be a fully qualified MS-DOS file name
   including a path. A standard format for the file must be used, as

    - Variable names and values should match the wording in the full-screen
      configuration window in most cases.

    - Each variable or value line should begin with an "at" symbol (@),
      followed by a variable name, a colon (:), and the value.

      For example: @Media type: 100BASE-TX

    - Any comment lines should start with a semicolon (;).

    - Blank lines and other white space is allowed between variable lines.

    - The variable names allowed are:

         Boot PROM size
         Media type
         Network driver optimization
         Full Duplex
         Link beat

    - The values allowed are the same as those shown in the full-screen
      configuration window.

      Example 1: @Network driver optimization:Normal
      Example 2: @Media type:On-board Coax


 - Full screen Windows mode:

   To run the diagnostic tests using full-screen windowing, type
   "3C59XCFG" (without the quotes) and press ENTER. Then click Run Tests on
   the Tests menu.

 - Command-line option:

   Command syntax: 3C59XCFG Run [/Testfile:<filename>]
   [/RESULTS:[<filename> | PRN | PRNHP]] [/ADAPTERNUM:<N> | /SLOT:<S>]

   The Run parameter runs the diagnostic tests on a selected adapter
   and displays the results on the screen. The defaults are Adapter 1 and
   Group 1 tests. The parameters below are all optional.

      /Testfile:<filename> specifies a test file that contains a specific
      test setup description.

      /Results:[<filename> or PRN or PRNHP] specifies an alternative
      location to store the test results. This location can be an MS-DOS
      path and filename, PRN printer port (same as LPT1), or PRNHP, which
      is an HP LaserJet printer connected to LPT1.

      /Adapternum:<N> specifies the adapter number to be tested, in the
      case of multiple adapters installed in the computer and recognized by
      this program. Run the List command separately (see List below) to
      determine the adapter number to use.

      /Slot:<S> specifies the physical slot number of the adapter to be
      tested when multiple adapters are installed in EISA computers.


 - Help

   Command syntax: 3C59XCFG Help [Command Keyword]

   Help is an online summary of commands. Without a command keyword, it
   gives a summary of the command keywords. With a command keyword
   specified, it gives the parameter choices for that particular command.
   For example, "3C59XCFG Help Configure" gives details about the parameter
   options for the Configure command.

 - Language

   Command syntax: 3C59XCFG Language /Langfile:<filename>

   Language invokes the program in full Windows mode using a specified
   external resource file. This option provides support for multiple
   languages via a different resource file for each language supported.

   This command requires the /Langfile:<filename> parameter. The
   file name is the name of the resource file that is loaded by the
   program. The file name can be a fully qualified MS-DOS file name.

   NOTE: At this time, there are no alternate resource files included on
   the EtherDisk disk.

 - List

   Command syntax: 3C59XCFG List

   List displays a list of currently installed adapters (and their assigned
   adapter numbers) that are recognized by this program. The adapter number
   is then used as the <N> value for the /Adapternum:<N> parameter when
   multiple adapters are installed. There are no parameters associated with
   the List command keyword.

 - Echoserver

   Command syntax: 3C59XCFG Echoserver [/Adapternum:<N> | /Slot:<S>]

   Echoserver enables an adapter to function within an echo server.
   In the case of multiple adapters, /Adapternum:<N> specifies the adapter
   number to be configured in the echo server. The /Slot:<S> parameter is
   available only on EISA computers, and refers to the physical slot in the
   echo server where the adapter is located.


If the adapter fails any of the diagnostic tests, see the Trouble.txt file
in the Diag directory on the EtherDisk disk for troubleshooting

The Support.txt file in the Info directory on the EtherDisk disk provides
information about obtaining product support for the adapter.

EtherDisk、 EtherLink 和 3Com 是 3Com 公司的注册的商标。所有其他商标均属于其各自所有者。

有关详细的信息联系处的 3com 公司技术支持: (800) 876-3266。

此处包括该产品由独立的 Microsoft 的供应商生产的 ; 我们不保证,或暗示或其他方式,这些产品的性能或可靠性。


文章编号: 154989 - 最后修改: 2014年2月22日 - 修订: 2.2
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 开发员版
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition
kbnosurvey kbarchive kbmt kb3rdparty kbhowto kbsetup KB154989 KbMtzh
注意:这篇文章是由无人工介入的微软自动的机器翻译软件翻译完成。微软很高兴能同时提供给您由人工翻译的和由机器翻译的文章, 以使您能使用您的语言访问所有的知识库文章。然而由机器翻译的文章并不总是完美的。它可能存在词汇,语法或文法的问题,就像是一个外国人在说中文时总是可能犯这样的错误。虽然我们经常升级机器翻译软件以提高翻译质量,但是我们不保证机器翻译的正确度,也不对由于内容的误译或者客户对它的错误使用所引起的任何直接的, 或间接的可能的问题负责。
点击这里察看该文章的英文版: 154989
Microsoft和/或其各供应商对于为任何目的而在本服务器上发布的文件及有关图形所含信息的适用性,不作任何声明。 所有该等文件及有关图形均"依样"提供,而不带任何性质的保证。Microsoft和/或其各供应商特此声明,对所有与该等信息有关的保证和条件不负任何责任,该等保证和条件包括关于适销性、符合特定用途、所有权和非侵权的所有默示保证和条件。在任何情况下,在由于使用或运行本服务器上的信息所引起的或与该等使用或运行有关的诉讼中,Microsoft和/或其各供应商就因丧失使用、数据或利润所导致的任何特别的、间接的、衍生性的损害或任何因使用而丧失所导致的之损害、数据或利润不负任何责任。

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com