文章編號: 163111 - 上次校閱: 2005年12月22日 - 版次: 4.2

遠端存取服務 (RAS) 錯誤碼清單

檢視此文章適用的產品。
系統提示本文適用於您使用的作業系統之外的作業系統。與您不相關的文章內容已停用。
本文曾發行於 CHT163111
全部展開 | 全部摺疊

結論

本文列出 Windows NT 4.0、Windows 98 和 Windows 95 中，「遠端存取服務」(RAS) 報告的錯誤碼。

其他相關資訊

錯誤訊息
   -------------------------------

600     An operation is pending. (操作擱置)
601     The port handle is invalid. (連接埠控制碼無效)
602	The port is already open. (連接埠已經開啟)
603     Caller's buffer is too small. (呼叫者的緩衝區太小)
604     Wrong information specified. (指定的資訊錯誤)
605     Cannot set port information. (無法設定連接埠資訊)
606     The port is not connected. (連接埠尚未連線)
607     The event is invalid. (事件無效)
608     The device does not exist. (裝置不存在)
609     The device type does not exist. (裝置類型不存在)
610     The buffer is invalid. (緩衝區無效)
611     The route is not available. (路由無法使用)
612     The route is not allocated. (尚未配置路由)
613     Invalid compression specified. (指定的壓縮無效)
614     Out of buffers. (緩衝區不足)
615     The port was not found. (找不到連接埠)
616     An asynchronous request is pending. (非同步要求正在擱置中)
617     The port or device is already disconnecting. (連接埠或裝置目前已經中斷連線)
618     The port is not open. (連接埠尚未開啟)
619     The port is disconnected. (連接埠已中斷連線)
620     There are no endpoints. (沒有結束點)
621     Cannot open the phone book file. (無法開啟電話簿檔案)
622     Cannot load the phone book file. (無法載入電話簿檔案)
623     Cannot find the phone book entry. (找不到電話簿項目)
624     Cannot write the phone book file. (無法寫入電話簿檔案)
625     Invalid information found in the phone book. (在電話簿中找到無效的資訊)
626     Cannot load a string. (無法載入字串)
627     Cannot find key. (找不到機碼)
628     The port was disconnected. (連接埠已經中斷連線)
629     The port was disconnected by the remote machine. (遠端電腦已將連接埠中斷連線)
630     The port was disconnected due to hardware failure. (由於硬體發生故障，連接埠已經中斷連線)
631     The port was disconnected by the user. (使用者已將連接埠中斷連線)
632     The structure size is incorrect. (結構大小不正確)
633     The port is already in use or is not configured for Remote
　　　　　Access dialout. (連接埠已經在使用中，或是未設定為遠端存取撥出之用)
634     Cannot register your computer on the remote network. (無法在遠端網路上登錄您的電腦)
635     Unknown error. (不明的錯誤)
636     The wrong device is attached to the port. (連接到連接埠的裝置不正確)
637     The string could not be converted. (無法轉換字串)
638     The request has timed out. (要求已經等候逾時)
639     No asynchronous net available. (沒有可用的非同步網路)
640     A NetBIOS error has occurred. (發生了 NetBIOS 錯誤)
641     The server cannot allocate NetBIOS resources needed to support
　　　　　the client. (伺服器無法配置支援用戶端所需的 NetBIOS 資源)
642     One of your NetBIOS names is already registered on the remote
　　　　　network. (您的其中一個 NetBIOS 名稱已經登錄在遠端網路上)
643     A network adapter at the server failed. (伺服器的一個網路介面卡失敗)
644     You will not receive network message popups. (您將不會收到快顯網路訊息)
645     Internal authentication error. (內部驗證錯誤)
646     The account is not permitted to log on at this time of day. (不允許帳戶在這個時間登入)
647     The account is disabled. (帳戶已停用)
648     The password has expired. (密碼已經過期)
649     The account does not have Remote Access permission. (此帳戶沒有遠端存取的使用權限)
650     The Remote Access server is not responding. (遠端存取伺服器沒有回應)
651     Your modem (or other connecting device) has reported an error. (您的數據機 (或其他連線裝置) 發生錯誤)
652     Unrecognized response from the device. (從裝置傳回無法識別的回應)
653     A macro required by the device was not found in the device .INF
　　　　　file section.(在裝置 .INF 檔案區段中找不到裝置所需的巨集)
654     A command or response in the device .INF file section refers to
　　　　　an undefined macro (裝置 .INF 檔案區段中的指令或回應參照了一個未定義的巨集)
655     The <message> macro was not found in the device .INF file
　　　　　section. (在裝置 .INF 檔案區段中找不到 <message> 巨集)
656     The <defaultoff> macro in the device .INF file section contains
　　　　　an undefined macro (在裝置 .INF 檔案區段中的 <defaultoff> 巨集包含了一個未定義的巨集)
657     The device .INF file could not be opened. (無法開啟裝置 .INF 檔案)
658     The device name in the device .INF or media .INI file is too
　　　　　long. (裝置 .INI 或媒體 .INI 檔案中的裝置名稱太長)
659     The media .INI file refers to an unknown device name. (媒體 .INI 檔案參照了一個無法辨識的裝置名稱)
660     The device .INF file contains no responses for the command. (裝置 .INF 檔案未包含指令的回應)
661     The device .INF file is missing a command. (裝置 .INF 檔案遺失了一個指令)
662     Attempted to set a macro not listed in device .INF file section. (嘗試設定未列在裝置 .INF 檔案區段中的巨集)
663     The media .INI file refers to an unknown device type. (媒體 .INF 檔案參照了一個無法辨識的裝置類型)
664     Cannot allocate memory. (無法配置記憶體)
665     The port is not configured for Remote Access. (連接埠不是設定為遠端存取之用)
666     Your modem (or other connecting device) is not functioning. (您的數據機 (或其他連線裝置) 無法正常運作)
667     Cannot read the media .INI file. (無法讀取媒體 .INI 檔案)
668     The connection dropped. (連線中斷)
669     The usage parameter in the media .INI file is invalid. (媒體 .INI 檔案中的使用方式參數不正確)
670     Cannot read the section name from the media .INI file. (無法從媒體 .INI 檔案讀取區段名稱)
671     Cannot read the device type from the media .INI file. (無法從媒體 .INI 檔案讀取裝置類型)
672     Cannot read the device name from the media .INI file. (無法從媒體 .INI 檔案讀取裝置名稱)
673     Cannot read the usage from the media .INI file. (無法從媒體 .INI 檔案讀取使用方式)
674     Cannot read the maximum connection BPS rate from the media .INI
　　　　　file. (無法從媒體 .INI 檔案讀取最大的連線 BPS 速率)
675     Cannot read the maximum carrier BPS rate from the media .INI
　　　　　file. (無法從媒體 .INI 檔案讀取最大的波載 BPS 速率)
676     The line is busy. (線路忙線中)
677     A person answered instead of a modem. (有人接聽，而不是數據機接聽)
678     There is no answer. (無人接聽)
679     Cannot detect carrier. (無法偵測波載)
680     There is no dial tone. (沒有撥號音)
681     General error reported by device. (裝置報告發生一般錯誤)
682     ERROR WRITING SECTIONNAME (寫入 SECTIONNAME 時發生錯誤)
683     ERROR WRITING DEVICETYPE (寫入 DEVICETYPE 時發生錯誤)
684     ERROR WRITING DEVICENAME (寫入 DEVICENAME 時發生錯誤)
685     ERROR WRITING MAXCONNECTBPS (寫入 MAXCONNECTBPS 時發生錯誤)
686     ERROR WRITING MAXCARRIERBPS (寫入 MAXCARRIERBPS 時發生錯誤)
687     ERROR WRITING USAGE (寫入 USAGE 時發生錯誤)
688     ERROR WRITING DEFAULTOFF (寫入 DEFAULTOFF 時發生錯誤)
689     ERROR READING DEFAULTOFF (讀取 DEFAULTOFF 時發生錯誤)
690     ERROR EMPTY INI FILE (空白 INI 檔案錯誤)
691     Access denied because username and/or password is invalid on the
　　　　　domain.(存取被拒絕，因為網域使用者名稱及 (或) 密碼不正確)
692     Hardware failure in port or attached device. (連接埠或連接的裝置發生硬體故障)
693     ERROR NOT BINARY MACRO (錯誤：不是二進位巨集)
694     ERROR DCB NOT FOUND (錯誤：找不到 DCB)
695     ERROR STATE MACHINES NOT STARTED (錯誤：狀態電腦未啟動)
696     ERROR STATE MACHINES ALREADY STARTED (錯誤：狀態電腦已經啟動)
697     ERROR PARTIAL RESPONSE LOOPING (錯誤: 部份回應迴圈處理)
698     A response keyname in the device .INF file is not in the
　　　　　expected format.(裝置 .INF 檔案中的回應關鍵名稱不是所要求的格式)
699     The device response caused buffer overflow. (裝置回應造成緩衝區溢位)
700     The expanded command in the device .INF file is too long. (裝置 .INF 檔案中的擴充指令太長)
701     The device moved to a BPS rate not supported by the COM driver. (裝置轉換到 COM 驅動程式所不支援的 BPS 速率)
702     Device response received when none expected. (意外接收到裝置的回應)
703     ERROR INTERACTIVE MODE (錯誤：互動模式)
704     ERROR BAD CALLBACK NUMBER (錯誤：回撥號碼不正確)
705     ERROR INVALID AUTH STATE  (錯誤：證狀態無效)
706     ERROR WRITING INITBPS (寫入 INITBPS 時發生錯誤)
707     X.25 diagnostic indication. (X.25 診斷指示)
708     The account has expired. (帳戶已經過期)
709     Error changing password on domain. (變更網域密碼時發生錯誤)
710     Serial overrun errors were detected while communicating with
　　　　　your modem. (進行數據機通訊時，偵測到序列滿溢錯誤)
711     RasMan initialization failure.Check the event log. (RasMan 初始化失敗。請檢查事件日誌)
712     Biplex port is initializing.Wait a few seconds and redial. (正在初始化 Biplex 連接埠。請稍待幾秒鐘後重撥)
713     No active ISDN lines are available. (沒有任何使用中的 ISDN 線路可供利用)
714     Not enough ISDN channels are available to make the call. (沒有足夠的 ISDN 通道可用來呼叫)
715     Too many errors occurred because of poor phone line quality. (因為電話線路品質不良，發生太多錯誤)
716     The Remote Access IP configuration is unusable. (遠端存取 IP 組態無法使用)
717     No IP addresses are available in the static pool of Remote
　　　　　Access IP addresses. (遠端存取服務 IP 位址的靜態集區中沒有可用的 IP 位址)
718     PPP timeout. (PPP 等候逾時)
719     PPP terminated by remote machine. (遠端電腦已終止 PPP)
720     No PPP control protocols configured. (沒有設定 PPP 控制通訊協定)
721     Remote PPP peer is not responding. (遠端 PPP 對等電腦沒有回應)
722     The PPP packet is invalid. (PPP 封包無效)
723     The phone number, including prefix and suffix, is too long. (包含首碼和尾碼的電話號碼太長)
724     The IPX protocol cannot dial-out on the port because the
　　　　　computer is an IPX router. IPX 通訊協定無法從連接埠撥出，因為這台電腦是 IPX 路由器
725     The IPX protocol cannot dial-in on the port because the IPX
　　　　　router is not installed. (IPX 通訊協定無法從連接埠撥入，因為未安裝 IPX 路由器)
726     The IPX protocol cannot be used for dial-out on more than one
　　　　　port at a time. (無法同時在數個連接埠上使用 IPX 通訊協定撥號)
727     Cannot access TCPCFG.DLL. (無法存取 TCPCFG.DLL)
728     Cannot find an IP adapter bound to Remote Access. (找不到連結到遠端存取的 IP 介面卡)
729     SLIP cannot be used unless the IP protocol is installed. (除非已安裝了 IP 通訊協定，否則無法使用 SLIP)
730     Computer registration is not complete. (尚未完成電腦登錄)
731     The protocol is not configured. (尚未設定通訊協定)
732     The PPP negotiation is not converging. (PPP 交涉沒有交集)
733     The PPP control protocol for this network protocol is not
　　　　　available on the server. 這個網路通訊協定的 PPP 控制通訊協定無法在伺服器上使用)
734     The PPP link control protocol terminated. (已經終止 PPP 連結控制通訊協定)
735     The requested address was rejected by the server. (伺服器拒絕了所要求的位址)
736     The remote computer terminated the control protocol. (遠端電腦終止了控制通訊協定)
737     Loopback detected. (偵測到回送)
738     The server did not assign an address. (伺服器沒有指派位址)
739     The remote server cannot use the Windows NT encrypted password. (遠端伺服器無法使用 Windows NT 加密密碼)
740     The TAPI devices configured for Remote Access failed to
　　　　　initialize or were not installed correctly. (為遠端存取設定的 TAPI 服務無法初始化，或是未正確安裝)
741     The local computer does not support encryption. (本機電腦不支援加密)
742     The remote server does not support encryption. (遠端伺服器不支援加密)
743     The remote server requires encryption. (遠端伺服器需要加密)
744     Cannot use the IPX net number assigned by the remote server.
　　　　　Check the event log. (無法使用遠端伺服器所指派的 IPX 網路編號。請檢查事件日誌)
752     A syntax error was encountered while processing a script. (處理指令檔時發生語法錯誤)
這篇文章中的資訊適用於:
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 4.0 Standard Edition
  • Microsoft Windows 95
  • Microsoft Windows 98 Standard Edition
回此頁最上方
關鍵字：?
kberrmsg kbinfo KB163111
Microsoft及(或)其供應商不就任何在本伺服器上發表的文字資料及其相關圖表資訊的恰當性作任何承諾。所有文字資料及其相關圖表均以「現狀」供應，不負任何擔保責任。Microsoft及(或)其供應商謹此聲明，不負任何對與此資訊有關之擔保責任，包括關於適售性、適用於某一特定用途、權利或不侵權的明示或默示擔保責任。Microsoft及(或)其供應商無論如何不對因或與使用本伺服器上資訊或與資訊的實行有關而引起的契約、過失或其他侵權行為之訴訟中的特別的、間接的、衍生性的損害或任何因使用而喪失所導致的之損害、資料或利潤負任何責任。