Article ID: 169289 - View products that this article applies to.
This article was previously published under Q169289
Expand all | Collapse all

SUMMARY

Dynamic Host Configuration Protocol (DHCP) is a standard protocol defined by RFC 1541 (which is superseded by RFC 2131) that allows a server to dynamically distribute IP addressing and configuration information to clients. Normally the DHCP server provides the client with at least this basic information:
  • IP Address

  • Subnet Mask

  • Default Gateway
Other information can be provided as well, such as Domain Name Service (DNS) server addresses and Windows Internet Name Service (WINS) server addresses. The system administrator configures the DHCP server with the options that are parsed out to the client.

MORE INFORMATION

The following Microsoft products provide DHCP client functionality:
  • Windows NT Server versions 3.5, 3.51, and 4.0

  • Windows NT Workstation versions 3.5, 3.51, and 4.0

  • Windows 95

  • Microsoft Network Client version 3.0 for MS-DOS

  • Microsoft LAN Manager Client version 2.2c for MS-DOS

  • Microsoft TCP/IP-32 for Windows for Workgroups versions 3.11, 3.11a, and 3.11b
Different DHCP clients support different options that they can receive from the DHCP server. For information on specific DHCP options supported by Microsoft DHCP clients, see the following article in the Microsoft Knowledge Base:
121005 DHCP Options Supported by Clients
The following Microsoft server operating systems provide DHCP server functionality:
  • Windows NT Server version 3.5

  • Windows NT Server version 3.51

  • Windows NT Server version 4.0
When a client is initialized for the first time after it is configured to receive DHCP information, it initiates a conversation with the server.

Below is a summary table of the conversation between client and server, which is followed by a packet-level description of the process:
   Source     Dest        Source     Dest              Packet
   MAC addr   MAC addr    IP addr    IP addr           Description
   -----------------------------------------------------------------
   Client     Broadcast   0.0.0.0    255.255.255.255   DHCP Discover
   DHCPsrvr   Broadcast   DHCPsrvr   255.255.255.255   DHCP Offer
   Client     Broadcast   0.0.0.0    255.255.255.255   DHCP Request
   DHCPsrvr   Broadcast   DHCPsrvr   255.255.255.255   DHCP ACK
				

The detailed conversation between DHCP client and DHCP server is as follows:

DHCPDISCOVER

The client sends a DHCPDISCOVER packet. The following is an excerpt from a network monitor capture showing the IP and DHCP portions of a DHCPDISCOVER packet. In the IP section, you can see the Destination address is 255.255.255.255 and the Source address is 0.0.0.0. The DHCP section identifies the packet as a Discover packet and identifies the client in two places using the physical address of the network card. Note the values in the CHADDR field and the DHCP: Client Identifier field are identical.
IP: ID = 0x0; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 0 (0x0)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x39A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: Discover           (xid=21274A1D)
    DHCP: Op Code           (op)     = 1 (0x1)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 556223005 (0x21274A1D)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP Discover
        DHCP: Client-identifier      = (Type: 1) 08 00 2b 2e d8 5e
        DHCP: Host Name              = JUMBO-WS
        DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
        DHCP: End of this option field
				

DHCPOFFER

The DHCP server responds by sending a DHCPOFFER packet. In the IP section of the capture excerpt below, the Source address is now the DHCP server IP address, and the Destination address is the broadcast address 255.255.255.255. The DHCP section identifies the packet as an Offer. The YIADDR field is populated with the IP address the server is offering the client. Note the CHADDR field still contains the physical address of the requesting client. Also, we see in the DHCP Option Field section the various options being sent by the server along with the IP address. In this case the server is sending the Subnet Mask, Default Gateway (Router), Lease Time, WINS server address (NetBIOS Name Service), and the NetBIOS Node Type.
IP: ID = 0x3C30; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 15408 (0x3C30)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2FA8
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: Offer              (xid=21274A1D)
    DHCP: Op Code           (op)     = 2 (0x2)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 556223005 (0x21274A1D)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 157.54.50.5
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP Offer
        DHCP: Subnet Mask            = 255.255.240.0
        DHCP: Renewal Time Value (T1) = 8 Days,  0:00:00
        DHCP: Rebinding Time Value (T2) = 14 Days,  0:00:00
        DHCP: IP Address Lease Time  = 16 Days,  0:00:00
        DHCP: Server Identifier      = 157.54.48.151
        DHCP: Router                 = 157.54.48.1
        DHCP: NetBIOS Name Service   = 157.54.16.154
        DHCP: NetBIOS Node Type      = (Length: 1) 04
        DHCP: End of this option field
				

DHCPREQUEST

The client responds to the DHCPOFFER by sending a DHCPREQUEST. In the IP section of the capture below, the Source address of the client is still 0.0.0.0 and the Destination for the packet is still 255.255.255.255. The client retains 0.0.0.0 because the client hasn't received verification from the server that it's okay to start using the address offered. The Destination is still broadcast, because more than one DHCP server may have responded and may be holding a reservation for an Offer made to the client. This lets those other DHCP servers know they can release their offered addresses and return them to their available pools. The DHCP section identifies the packet as a Request and verifies the offered address using the DHCP: Requested Address field. The DHCP: Server Identifier field shows the IP address of the DHCP server offering the lease.
IP: ID = 0x100; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 256 (0x100)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x38A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: Request            (xid=21274A1D)
    DHCP: Op Code           (op)     = 1 (0x1)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 556223005 (0x21274A1D)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP Request
        DHCP: Client-identifier      = (Type: 1) 08 00 2b 2e d8 5e
        DHCP: Requested Address      = 157.54.50.5
        DHCP: Server Identifier      = 157.54.48.151
        DHCP: Host Name              = JUMBO-WS
        DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
        DHCP: End of this option field
				

DHCPACK

The DHCP server responds to the DHCPREQUEST with a DHCPACK, thus completing the initialization cycle. The Source address is the DHCP server IP address, and the Destination address is still 255.255.255.255. The YIADDR field contains the client's address, and the CHADDR and DHCP: Client Identifier fields are the physical address of the network card in the requesting client. The DHCP Option section identifies the packet as an ACK.
IP: ID = 0x3D30; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 15664 (0x3D30)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2EA8
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: ACK                (xid=21274A1D)
    DHCP: Op Code           (op)     = 2 (0x2)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 556223005 (0x21274A1D)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 157.54.50.5
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP ACK
        DHCP: Renewal Time Value (T1) = 8 Days,  0:00:00
        DHCP: Rebinding Time Value (T2) = 14 Days,  0:00:00
        DHCP: IP Address Lease Time  = 16 Days,  0:00:00
        DHCP: Server Identifier      = 157.54.48.151
        DHCP: Subnet Mask            = 255.255.240.0
        DHCP: Router                 = 157.54.48.1
        DHCP: NetBIOS Name Service   = 157.54.16.154
        DHCP: NetBIOS Node Type      = (Length: 1) 04
        DHCP: End of this option field
				

If the client has previously had a DHCP assigned IP address and it is restarted, the client will specifically request the previously leased IP address in a special DHCPREQUEST packet. The Source address is 0.0.0.0 and the Destination is the broadcast address 255.255.255.255. Microsoft clients will populate the DHCP Option Field DHCP: Requested Address with the previously assigned address. Strictly RFC compliant clients will populate the CIADDR Field with the address requested. The Microsoft DHCP server will accept either.
IP: ID = 0x0; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 0 (0x0)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x39A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: Request            (xid=2757554E)
    DHCP: Op Code           (op)     = 1 (0x1)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 660034894 (0x2757554E)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP Request
        DHCP: Client-identifier      = (Type: 1) 08 00 2b 2e d8 5e
        DHCP: Requested Address      = 157.54.50.5
        DHCP: Host Name              = JUMBO-WS
        DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
        DHCP: End of this option field
				

At this point, the server may or may not respond. The behavior of the Windows NT DHCP server depends on the version of the operating system being used as well as other factors such as superscoping. If the server determines that the client can still use the address, it will either remain silent or ACK the DHCPREQUEST. If the server determines that the client cannot have the address, it will send a NACK.
IP: ID = 0x3F1A; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 16154 (0x3F1A)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x2CBE
    IP: Source Address = 157.54.48.151
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: NACK               (xid=74A005CE)
    DHCP: Op Code           (op)     = 2 (0x2)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 1956644302 (0x74A005CE)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP NACK
        DHCP: Server Identifier      = 157.54.48.151
        DHCP: End of this option field
				

The client will then begin the discover process, but the DHCPDISCOVER packet will still attempt to lease the same address. In many instances, tth client will get the same address but may not.
IP: ID = 0x100; Proto = UDP; Len: 328
    IP: Version = 4 (0x4)
    IP: Header Length = 20 (0x14)
    IP: Service Type = 0 (0x0)
        IP: Precedence = Routine
        IP: ...0.... = Normal Delay
        IP: ....0... = Normal Throughput
        IP: .....0.. = Normal Reliability
    IP: Total Length = 328 (0x148)
    IP: Identification = 256 (0x100)
    IP: Flags Summary = 0 (0x0)
        IP: .......0 = Last fragment in datagram
        IP: ......0. = May fragment datagram if necessary
    IP: Fragment Offset = 0 (0x0) bytes
    IP: Time to Live = 128 (0x80)
    IP: Protocol = UDP - User Datagram
    IP: Checksum = 0x38A6
    IP: Source Address = 0.0.0.0
    IP: Destination Address = 255.255.255.255
    IP: Data: Number of data bytes remaining = 308 (0x0134)

DHCP: Discover           (xid=3ED14752)
    DHCP: Op Code           (op)     = 1 (0x1)
    DHCP: Hardware Type     (htype)  = 1 (0x1) 10Mb Ethernet
    DHCP: Hardware Address Length (hlen) = 6 (0x6)
    DHCP: Hops              (hops)   = 0 (0x0)
    DHCP: Transaction ID    (xid)    = 1053902674 (0x3ED14752)
    DHCP: Seconds           (secs)   = 0 (0x0)
    DHCP: Flags             (flags)  = 0 (0x0)
        DHCP: 0............... = No Broadcast
    DHCP: Client IP Address (ciaddr) = 0.0.0.0
    DHCP: Your   IP Address (yiaddr) = 0.0.0.0
    DHCP: Server IP Address (siaddr) = 0.0.0.0
    DHCP: Relay  IP Address (giaddr) = 0.0.0.0
    DHCP: Client Ethernet Address (chaddr) = 08002B2ED85E
    DHCP: Server Host Name  (sname)  = <Blank>
    DHCP: Boot File Name    (file)   = <Blank>
    DHCP: Magic Cookie = [OK]
    DHCP: Option Field      (options)
        DHCP: DHCP Message Type      = DHCP Discover
        DHCP: Client-identifier      = (Type: 1) 08 00 2b 2e d8 5e
        DHCP: Requested Address      = 157.54.51.5
        DHCP: Host Name              = JUMBO-WS
        DHCP: Parameter Request List = (Length: 7) 01 0f 03 2c 2e 2f 06
        DHCP: End of this option field
				

DHCP information obtained by the client from a DHCP server will have a lease time associated with it. The lease time defines how long the client can use the DHCP-assigned information. When the lease reaches certain milestones, the client will attempt to renew its DHCP information.

To view IP information on a Windows or Windows for Workgroups client, use the IPCONFIG utility. If the client is Windows 95, use WINIPCFG.

REFERENCES

For more information about DHCP, see RFC1541 and RFC2131. RFCs may be obtained via the Internet at numerous sites, for example:
http://www.rfc-editor.org/
and
http://www.tech-nic.qc.ca/

Properties

Article ID: 169289 - Last Review: February 27, 2007 - Revision: 3.3
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
  • Microsoft Windows 2000 Datacenter Server
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition
  • Microsoft Windows for Workgroups 3.2
  • Microsoft TCP/IP-32 for Windows for Workgroups 1.0
  • Microsoft Windows 95
Keywords: 
kbnetwork KB169289

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com