XADM: ESEUTIL opdracht regel Parameters

Vertaalde artikelen Vertaalde artikelen
Artikel ID: 182903 - Bekijk de producten waarop dit artikel van toepassing is.
Alles uitklappen | Alles samenvouwen

Samenvatting

Microsoft Exchange Server 5. 5 bevat een hulp programma Eseutil genoemd die vervangt de Edbutil uit eerdere versies.

Meer informatie

De volgende opdracht wordt de onderstaande gegevens uitvoer:
C:\>ESEUTIL /?
Microsoft(R) Exchange Server Database Utilities
Version 5.5
Copyright (C) Microsoft Corporation 1991-1997. All Rights Reserved.

DESCRIPTION: Maintenance utilities for Microsoft(R) Exchange Server
databases.

MODES OF OPERATION:
   Defragmentation:  ESEUTIL /d <database name> [options]
          Recovery:  ESEUTIL /r [options]
         Integrity:  ESEUTIL /g <database name> [options]
           Upgrade:  ESEUTIL /u <database name> /d<previous .DLL> [options]
         File Dump:  ESEUTIL /m[mode-modifier] <filename>
            Repair:  ESEUTIL /p <database name> [options]

   Note log file path must be specified explicitly
   unless using /IS or /DS options.

<<<<<  Press a key for more help  >>>>>
D=Defragmentation, R=Recovery, G=Integrity, U=Upgrade, M=File Dump,
P=Repair
=>

DEFRAGMENTATION (D)

DEFRAGMENTATION/COMPACTION:
 DESCRIPTION:  Performs off-line compaction of a database.
      SYNTAX:  ESEUTIL /d <database name> [options]
  PARAMETERS:  <database name> - filename of database to compact, or one of
                                /ispriv, /ispub, or /ds (see NOTES below)
    OPTIONS:  zero or more of the following switches, separated by a space:
              /l<path> - location of log files (default: current directory)
              /s<path> - location of system files (e.g., checkpoint file)
                         (default: current directory)
              /b<db>   - make backup copy under the specified name
              /t<db>   - set temp. database name (default: TEMPDFRG.EDB)
              /p       - preserve temporary database (i.e., don't instate)
              /o       - suppress logo
      NOTES:  1) The switches /ispriv, /ispub, and /ds use the Registry
                 to automatically set the database name, log file path,
                 and system file path for the appropriate Exchange store.
              2) Before defragmentation begins, soft recovery is always
                 performed to ensure the database is in a consistent state.
              3) If instating is disabled (i.e., /p), the original database
                 is preserved uncompacted, and the temporary database will
                 contain the defragmented version of the database.

RECOVERY (R)

RECOVERY:
 DESCRIPTION:  Performs recovery, bringing all databases to a
               consistent state.
     SYNTAX:  ESEUTIL /r [options]
    OPTIONS:  zero or more of the following switches, separated by a space:
              /is or /ds - see NOTES below
              /l<path>   - location of log files
                           (default: current directory)
              /s<path>   - location of system files (e.g., checkpoint file)
                           (default: current directory)
              /o         - suppress logo
      NOTES:  1) The special switches /is and /ds use the Registry to
                 automatically set the log file path and system file path
                 for recovery of the appropriate Exchange store(s).

INTEGRITY (G)

INTEGRITY:
 DESCRIPTION:  Verifies integrity of a database.
      SYNTAX:  ESEUTIL /g <database name> [options]
  PARAMETERS:  <database name> - filename of database to verify, or one of
                                 /ispriv, /ispub, or /ds (see NOTES below)
    OPTIONS:  zero or more of the following switches, separated by a space:
              /t<db>   - set temp. database name (default: INTEG.EDB)
              /v       - verbose
              /x       - give detailed error messages
              /o       - suppress logo
      NOTES:  1) The consistency checker performs no recovery and always
                 assumes that the database is in a consistent state,
                 returning an error if this is not the case.
              2) The special switches /ispriv, /ispub, and /ds use the
                 registry to automatically set the database name for the
                 appropriate Exchange store.


UPGRADE (U)

UPGRADE:
 DESCRIPTION:  Upgrades a database (created using a previous release of
               Microsoft(R) Exchange Server) to the current version.
      SYNTAX:  ESEUTIL /u <database name> /d<previous .DLL> [options]
  PARAMETERS:  <database name>   - filename of the database to upgrade.
              /d<previous .DLL> - pathed filename of the .DLL that came
                                  with the release of Microsoft(R) Exchange
                                  Server from which you're upgrading.
    OPTIONS:  zero or more of the following switches, separated by a space:
              /b<db> - make backup copy under the specified name
              /t<db> - set temporary database name (default: TEMPUPGD.EDB)
              /p     - preserve temporary database (i.e., don't instate)
              /o     - suppress logo
      NOTES:  1) This utility should only be used to upgrade a database
                 after an internal database format change has taken place.
                 If necessary, this will usually only coincide with the
                 release of a major, new revision of Microsoft(R)
                 Exchange Server.
              2) Before upgrading, the database should be in a consistent
                 state. An error will be returned if otherwise.
              3) If instating is disabled (i.e., /p), the original database
                 is preserved unchanged, and the temporary database will
                 contain the upgraded version of the database.


FILE DUMP (M)

FILE DUMP:
 DESCRIPTION:  Generates formatted output of various database file types.
      SYNTAX:  ESEUTIL /m[mode-modifier] <filename> [options]
  PARAMETERS:  [mode-modifier] - an optional letter designating the type of
                                 file dump to perform. Valid values are:
                                 h - dump database header (default)
                                 k - dump checkpoint file
               <filename>      - name of file to dump. The type of the
                              specified file should match the dump type
                              being requested (e.g., if using /mh, then
                              <filename> must be the name of a database).

REPAIR (P)

REPAIR:
 DESCRIPTION:  Repairs a corrupted or damaged database.
      SYNTAX:  ESEUTIL /p <database name> [options]
  PARAMETERS:  <database name> - filename of database to compact, or one of
                                 /ispriv, /ispub, or /ds (see NOTES below)
   OPTIONS:  zero or more of the following switches, separated by a space:
            /t<db>       - set temp. database name (default: REPAIR.EDB)
            /d           - don't repair the database, just scan for errors
            /v           - verbose output
            /x           - give detailed error messages
            /o           - suppress logo
   NOTES:  1) The switches /ispriv, /ispub, and /ds use the registry
              to automatically set the database name for the
              appropriate Exchange store.
           2) Recovery will not be run.
				
OPMERKING: De sectie "Upgrade" onder "Parameters" verwijst naar de Edb.dll vanaf de cd-rom met Exchange 5. 5. Dit bestand zoekt, zoek de Server\Setup\Platformmap op de CD met Exchange 5. 5.

Klik op de volgende artikel nummers in de Microsoft Knowledge Base voor meer informatie over het gebruik van ESEUTIL /U:
196693XADM: Het gebruik van ESEUTIL /U een data base bijwerken
259851Consequenties van het uitvoeren van het hulp programma eseutil /p or edbutil /d /r opdracht in Exchange

Eigenschappen

Artikel ID: 182903 - Laatste beoordeling: vrijdag 25 februari 2011 - Wijziging: 2.0
De informatie in dit artikel is van toepassing op:
  • Microsoft Exchange Server 5.5 Standard Edition
Trefwoorden: 
kbinfo kbusage kbmt KB182903 KbMtnl
Automatisch vertaald artikel
BELANGRIJK: Dit artikel is vertaald door de vertaalmachine software van Microsoft in plaats van door een professionele vertaler. Microsoft biedt u professioneel vertaalde artikelen en artikelen vertaald door de vertaalmachine, zodat u toegang heeft tot al onze knowledge base artikelen in uw eigen taal. Artikelen vertaald door de vertaalmachine zijn niet altijd perfect vertaald. Deze artikelen kunnen fouten bevatten in de vocabulaire, zinsopbouw en grammatica en kunnen lijken op hoe een anderstalige de taal spreekt en schrijft. Microsoft is niet verantwoordelijk voor onnauwkeurigheden, fouten en schade ontstaan door een incorrecte vertaling van de content of het gebruik ervan door onze klanten. Microsoft past continue de kwaliteit van de vertaalmachine software aan door deze te updaten.
De Engelstalige versie van dit artikel is de volgende:182903
Vrijwaring inhoud KB-artikelen over niet langer ondersteunde producten
Dit artikel heeft betrekking op producten waarvoor Microsoft geen ondersteuning meer biedt. Daarom wordt dit artikel alleen in de huidige vorm aangeboden en wordt het niet meer bijgewerkt.

Geef ons feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com