XADM: Parametre príkazového riadka ESEUTIL

Preklady článku Preklady článku
ID článku: 182903 - Zobraziť produkty, ktorých sa tento článok týka.
Rozbaliť všetko | Zbaliť všetko

SUHRN

Program Microsoft Exchange Server 5.5 zahŕňa nástroj nazývaný Eseutil nahradí Edbutil z predchádzajúcich verzií.

DALSIE INFORMACIE

Nasledovný príkaz vypíše informácie nižšie:
C:\>ESEUTIL /?
Microsoft(R) Exchange Server Database Utilities
Version 5.5
Copyright (C) Microsoft Corporation 1991-1997. All Rights Reserved.

DESCRIPTION: Maintenance utilities for Microsoft(R) Exchange Server
databases.

MODES OF OPERATION:
   Defragmentation:  ESEUTIL /d <database name> [options]
          Recovery:  ESEUTIL /r [options]
         Integrity:  ESEUTIL /g <database name> [options]
           Upgrade:  ESEUTIL /u <database name> /d<previous .DLL> [options]
         File Dump:  ESEUTIL /m[mode-modifier] <filename>
            Repair:  ESEUTIL /p <database name> [options]

   Note log file path must be specified explicitly
   unless using /IS or /DS options.

<<<<<  Press a key for more help  >>>>>
D=Defragmentation, R=Recovery, G=Integrity, U=Upgrade, M=File Dump,
P=Repair
=>

DEFRAGMENTATION (D)

DEFRAGMENTATION/COMPACTION:
 DESCRIPTION:  Performs off-line compaction of a database.
      SYNTAX:  ESEUTIL /d <database name> [options]
  PARAMETERS:  <database name> - filename of database to compact, or one of
                                /ispriv, /ispub, or /ds (see NOTES below)
    OPTIONS:  zero or more of the following switches, separated by a space:
              /l<path> - location of log files (default: current directory)
              /s<path> - location of system files (e.g., checkpoint file)
                         (default: current directory)
              /b<db>   - make backup copy under the specified name
              /t<db>   - set temp. database name (default: TEMPDFRG.EDB)
              /p       - preserve temporary database (i.e., don't instate)
              /o       - suppress logo
      NOTES:  1) The switches /ispriv, /ispub, and /ds use the Registry
                 to automatically set the database name, log file path,
                 and system file path for the appropriate Exchange store.
              2) Before defragmentation begins, soft recovery is always
                 performed to ensure the database is in a consistent state.
              3) If instating is disabled (i.e., /p), the original database
                 is preserved uncompacted, and the temporary database will
                 contain the defragmented version of the database.

RECOVERY (R)

RECOVERY:
 DESCRIPTION:  Performs recovery, bringing all databases to a
               consistent state.
     SYNTAX:  ESEUTIL /r [options]
    OPTIONS:  zero or more of the following switches, separated by a space:
              /is or /ds - see NOTES below
              /l<path>   - location of log files
                           (default: current directory)
              /s<path>   - location of system files (e.g., checkpoint file)
                           (default: current directory)
              /o         - suppress logo
      NOTES:  1) The special switches /is and /ds use the Registry to
                 automatically set the log file path and system file path
                 for recovery of the appropriate Exchange store(s).

INTEGRITY (G)

INTEGRITY:
 DESCRIPTION:  Verifies integrity of a database.
      SYNTAX:  ESEUTIL /g <database name> [options]
  PARAMETERS:  <database name> - filename of database to verify, or one of
                                 /ispriv, /ispub, or /ds (see NOTES below)
    OPTIONS:  zero or more of the following switches, separated by a space:
              /t<db>   - set temp. database name (default: INTEG.EDB)
              /v       - verbose
              /x       - give detailed error messages
              /o       - suppress logo
      NOTES:  1) The consistency checker performs no recovery and always
                 assumes that the database is in a consistent state,
                 returning an error if this is not the case.
              2) The special switches /ispriv, /ispub, and /ds use the
                 registry to automatically set the database name for the
                 appropriate Exchange store.


UPGRADE (U)

UPGRADE:
 DESCRIPTION:  Upgrades a database (created using a previous release of
               Microsoft(R) Exchange Server) to the current version.
      SYNTAX:  ESEUTIL /u <database name> /d<previous .DLL> [options]
  PARAMETERS:  <database name>   - filename of the database to upgrade.
              /d<previous .DLL> - pathed filename of the .DLL that came
                                  with the release of Microsoft(R) Exchange
                                  Server from which you're upgrading.
    OPTIONS:  zero or more of the following switches, separated by a space:
              /b<db> - make backup copy under the specified name
              /t<db> - set temporary database name (default: TEMPUPGD.EDB)
              /p     - preserve temporary database (i.e., don't instate)
              /o     - suppress logo
      NOTES:  1) This utility should only be used to upgrade a database
                 after an internal database format change has taken place.
                 If necessary, this will usually only coincide with the
                 release of a major, new revision of Microsoft(R)
                 Exchange Server.
              2) Before upgrading, the database should be in a consistent
                 state. An error will be returned if otherwise.
              3) If instating is disabled (i.e., /p), the original database
                 is preserved unchanged, and the temporary database will
                 contain the upgraded version of the database.


FILE DUMP (M)

FILE DUMP:
 DESCRIPTION:  Generates formatted output of various database file types.
      SYNTAX:  ESEUTIL /m[mode-modifier] <filename> [options]
  PARAMETERS:  [mode-modifier] - an optional letter designating the type of
                                 file dump to perform. Valid values are:
                                 h - dump database header (default)
                                 k - dump checkpoint file
               <filename>      - name of file to dump. The type of the
                              specified file should match the dump type
                              being requested (e.g., if using /mh, then
                              <filename> must be the name of a database).

REPAIR (P)

REPAIR:
 DESCRIPTION:  Repairs a corrupted or damaged database.
      SYNTAX:  ESEUTIL /p <database name> [options]
  PARAMETERS:  <database name> - filename of database to compact, or one of
                                 /ispriv, /ispub, or /ds (see NOTES below)
   OPTIONS:  zero or more of the following switches, separated by a space:
            /t<db>       - set temp. database name (default: REPAIR.EDB)
            /d           - don't repair the database, just scan for errors
            /v           - verbose output
            /x           - give detailed error messages
            /o           - suppress logo
   NOTES:  1) The switches /ispriv, /ispub, and /ds use the registry
              to automatically set the database name for the
              appropriate Exchange store.
           2) Recovery will not be run.
				
POZNÁMKA: "Upgrade" časti "Parametrov" odkazuje na Edb.dll z výmeny 5.5 CD. Ak chcete nájsť tento súbor, vyhľadať Server\Setup\Platforma Priečinok Exchange 5.5 CD.

Ďalšie informácie o používaní ESEUTIL /U po kliknutí na nasledovné čísla článkov databázy Microsoft Knowledge Base:
196693 XADM: Ako používať ESEUTIL /U upgrade databázy
259851 Dôsledky spustený príkaz eseutil /r /d /p alebo edbutil výmenou

Vlastnosti

ID článku: 182903 - Posledná kontrola: 18. októbra 2011 - Revízia: 2.0
Informácie v tomto článku sa týkajú nasledujúcich produktov:
  • Microsoft Exchange Server 5.5 Standard Edition
Kľúčové slová: 
kbinfo kbusage kbmt KB182903 KbMtsk
Strojovo preložené
DÔLEŽITÉ: Tento článok bol preložený pomocou softvéru na strojový preklad od spoločnosti Microsoft, nie prekladateľom. Spoločnosť Microsoft ponúka články preložené prekladateľmi aj strojovo preložené články, vďaka čomu máte možnosť prístupu ku všetkým článkom databázy Knowledge Base vo svojom jazyku. Strojovo preložený článok však nie je vždy perfektný. Môže obsahovať chyby týkajúce sa slovnej zásoby, syntaxe alebo gramatiky, podobne ako cudzinec môže robiť chyby, keď rozpráva vašim jazykom. Spoločnosť Microsoft nenesie zodpovednosť za akékoľvek nepresnosti, chyby alebo škody spôsobené akýmkoľvek nepresným prekladom obsahu alebo jeho použitím zo strany zákazníkov. Spoločnosť Microsoft softvér na strojový preklad pravidelne aktualizuje.
Pokiaľ chcete vidieť anglickú verziu článku, kliknite sem:182903
Upozornenie na neaktuálny obsah článku databázy KB
Tento článok obsahuje informácie o produktoch, pre ktoré spoločnosť Microsoft už neposkytuje technickú podporu. Z tohto dôvodu je tento článok publikovaný ako nezmenený a už nebude aktualizovaný.

Odošlite odozvu

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com