XADM:ESEUTIL 命令列參數

文章翻譯 文章翻譯
文章編號: 182903 - 檢視此文章適用的產品。
全部展開 | 全部摺疊

結論

Microsoft Exchange Server 5.5 中包含名為 Eseutil 的公用程式,此公用程式是取代更早版本中的 Edbutil。

其他相關資訊

下列命令會輸出下方的資訊:
C:\>ESEUTIL /?
Microsoft(R) Exchange Server Database Utilities
Version 5.5
Copyright (C) Microsoft Corporation 1991-1997. All Rights Reserved.

DESCRIPTION:Maintenance utilities for Microsoft(R) Exchange Server
databases.

MODES OF OPERATION:
Defragmentation:ESEUTIL /d <database name> [options]
Recovery:ESEUTIL /r [options]
Integrity:ESEUTIL /g <database name> [options]
Upgrade:ESEUTIL /u <database name> /d<previous .DLL> [options]
File Dump:ESEUTIL /m[mode-modifier] <filename>
Repair:ESEUTIL /p <database name> [options]

Note log file path must be specified explicitly
unless using /IS or /DS options.

<<<<<  Press a key for more help  >>>>>
D=Defragmentation, R=Recovery, G=Integrity, U=Upgrade, M=File Dump,
P=Repair
=>

DEFRAGMENTATION (D)

DEFRAGMENTATION/COMPACTION:
DESCRIPTION:Performs off-line compaction of a database.
SYNTAX:ESEUTIL /d <database name> [options]
PARAMETERS:<database name> - filename of database to compact, or one of
/ispriv, /ispub, or /ds (see NOTES below)
OPTIONS:zero or more of the following switches, separated by a space:
/l<path> - location of log files (default:current directory)
/s<path> - location of system files (e.g., checkpoint file)
(default:current directory)
/b<db>   - make backup copy under the specified name
/t<db>   - set temp. database name (default:TEMPDFRG.EDB)
/p       - preserve temporary database (i.e., don't instate)
/o       - suppress logo
NOTES:1) The switches /ispriv, /ispub, and /ds use the Registry
to automatically set the database name, log file path,
and system file path for the appropriate Exchange store.
2) Before defragmentation begins, soft recovery is always
performed to ensure the database is in a consistent state.
3) If instating is disabled (i.e., /p), the original database
is preserved uncompacted, and the temporary database will
contain the defragmented version of the database.

RECOVERY (R)

RECOVERY:
DESCRIPTION:Performs recovery, bringing all databases to a
consistent state.
SYNTAX:ESEUTIL /r [options]
OPTIONS:zero or more of the following switches, separated by a space:
/is or /ds - see NOTES below
/l<path>   - location of log files
(default:current directory)
/s<path>   - location of system files (e.g., checkpoint file)
(default:current directory)
/o         - suppress logo
NOTES:1) The special switches /is and /ds use the Registry to
automatically set the log file path and system file path
for recovery of the appropriate Exchange store(s).

INTEGRITY (G)

INTEGRITY:
DESCRIPTION:Verifies integrity of a database.
SYNTAX:ESEUTIL /g <database name> [options]
PARAMETERS:<database name> - filename of database to verify, or one of
/ispriv, /ispub, or /ds (see NOTES below)
OPTIONS:zero or more of the following switches, separated by a space:
/t<db>   - set temp. database name (default:INTEG.EDB)
/v       - verbose
/x       - give detailed error messages
/o       - suppress logo
NOTES:1) The consistency checker performs no recovery and always
assumes that the database is in a consistent state,
returning an error if this is not the case.
2) The special switches /ispriv, /ispub, and /ds use the
registry to automatically set the database name for the
appropriate Exchange store.


UPGRADE (U)

UPGRADE:
DESCRIPTION:Upgrades a database (created using a previous release of
Microsoft(R) Exchange Server) to the current version.
SYNTAX:ESEUTIL /u <database name> /d<previous .DLL> [options]
PARAMETERS:<database name>   - filename of the database to upgrade.
/d<previous .DLL> - pathed filename of the .DLL that came
with the release of Microsoft(R) Exchange
Server from which you're upgrading.
OPTIONS:zero or more of the following switches, separated by a space:
/b<db> - make backup copy under the specified name
/t<db> - set temporary database name (default:TEMPUPGD.EDB)
/p     - preserve temporary database (i.e., don't instate)
/o     - suppress logo
NOTES:1) This utility should only be used to upgrade a database
after an internal database format change has taken place.
If necessary, this will usually only coincide with the
release of a major, new revision of Microsoft(R)
Exchange Server.
2) Before upgrading, the database should be in a consistent
state.An error will be returned if otherwise.
3) If instating is disabled (i.e., /p), the original database
is preserved unchanged, and the temporary database will
contain the upgraded version of the database.


FILE DUMP (M)

FILE DUMP:
DESCRIPTION:Generates formatted output of various database file types.
SYNTAX:ESEUTIL /m[mode-modifier] <filename> [options]
PARAMETERS:[mode-modifier] - an optional letter designating the type of
file dump to perform.Valid values are:
h - dump database header (default)
k - dump checkpoint file
<filename>      - name of file to dump.The type of the
specified file should match the dump type
being requested (e.g., if using /mh, then
<filename> must be the name of a database).

REPAIR (P)

REPAIR:
DESCRIPTION:Repairs a corrupted or damaged database.
SYNTAX:ESEUTIL /p <database name> [options]
PARAMETERS:<database name> - filename of database to compact, or one of
/ispriv, /ispub, or /ds (see NOTES below)
OPTIONS:zero or more of the following switches, separated by a space:
/t<db>       - set temp. database name (default:REPAIR.EDB)
/d           - don't repair the database, just scan for errors
/v           - verbose output
/x           - give detailed error messages
/o           - suppress logo
NOTES:1) The switches /ispriv, /ispub, and /ds use the registry
to automatically set the database name for the
appropriate Exchange store.
2) Recovery will not be run.
				
注意:「升級」部分的「參數」內容中,.DLL 指的是 Exchange 5.5 光碟中的 Edb.dll 檔。您可以在 Exchange 5.5 光碟的 Server\Setup\Platform 資料夾中找到這個檔案。

如需有關使用 ESEUTIL /U 的詳細資訊,請按一下下面的文件編號,檢視「Microsoft 知識庫」中的文件:
196693 XADM: How To Use ESEUTIL /U to Upgrade a Database
259851 在 Exchange 中執行 eseutil /p 或 edbutil /d /r 命令分支

屬性

文章編號: 182903 - 上次校閱: 2006年9月6日 - 版次: 4.0
這篇文章中的資訊適用於:
  • Microsoft Exchange Server 5.5 Standard Edition
關鍵字:?
kbinfo kbusage KB182903
Microsoft及(或)其供應商不就任何在本伺服器上發表的文字資料及其相關圖表資訊的恰當性作任何承諾。所有文字資料及其相關圖表均以「現狀」供應,不負任何擔保責任。Microsoft及(或)其供應商謹此聲明,不負任何對與此資訊有關之擔保責任,包括關於適售性、適用於某一特定用途、權利或不侵權的明示或默示擔保責任。Microsoft及(或)其供應商無論如何不對因或與使用本伺服器上資訊或與資訊的實行有關而引起的契約、過失或其他侵權行為之訴訟中的特別的、間接的、衍生性的損害或任何因使用而喪失所導致的之損害、資料或利潤負任何責任。
依現狀不再更新的知識庫內容免責聲明
本文旨在說明 Microsoft 不再提供支援的產品。因此,本文係依「現狀」提供,不會再更新。

提供意見

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com