File corruption occurs when you perform a write operation on a flash storage device that is attached to a Windows Embedded CE 6.0 R3-based device

Article ID: 2128768 - View products that this article applies to.
Expand all | Collapse all

On This Page

SYMPTOMS

Consider the following scenario:
  • You run a Windows Embedded CE 6.0 R3 image that includes the Flash MDD catalog item on a target device.
  • Bad blocks are generated when you use a flash storage device that is attached to the target device.
  • You restart the target device. Then, you perform a write operation on the flash storage device.
In this scenario, the file system on the flash storage device may be corrupted. 
Back to the top | Give Feedback

CAUSE

This problem occurs because the write operation occurs on the bad blocks on the flash storage device. 
Back to the top | Give Feedback

RESOLUTION

Software update information

A supported software update is now available from Microsoft as Windows Embedded CE 6.0 Platform Builder Monthly Update (June, 2010). You can confirm this by scrolling to the "File information" section of this article. The package file name contains the product version, date, Knowledge Base article number, and processor type. The package file name format is:
Product version-yymmdd-kbnnnnnn-processor type
For example: Wincepb50-060503-kb917590-armv4i.msi is the ARMV4i Windows Embedded CE 5.0 Platform Builder fix that is documented in KB article 917590 and that is contained in the May 2006 monthly update. To resolve this problem immediately, click the following article number for information about obtaining Windows Embedded CE Platform Builder and core operating system software updates:
837392
(http://support.microsoft.com/kb/837392/ )
How to locate core operating system fixes for Microsoft Windows Embedded CE Platform Builder products

Prerequisites

This update is supported only if all previously issued updates for this product have also been installed.

Restart requirement

After you apply this update, you must perform a clean build of the whole platform. To do this, use one of the following methods:
  • On the Build menu, click Clean, and then click Build Platform.
  • On the Build menu, click Rebuild Platform.
You do not have to restart the computer after you apply this update.

Update replacement information

This update does not replace any other updates.

File information

The English version of this software update package has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.
Installer files
Collapse this tableExpand this table
File nameFile sizeDateTime
Wincepb60-100615-kb2128768-armv4i.msi873,98415-Jun-201020:13
Wincepb60-100615-kb2128768-mipsii.msi852,48015-Jun-201020:13
Wincepb60-100615-kb2128768-mipsii_fp.msi853,50415-Jun-201020:13
Wincepb60-100615-kb2128768-mipsiv.msi857,08815-Jun-201020:13
Wincepb60-100615-kb2128768-mipsiv_fp.msi857,60015-Jun-201020:13
Wincepb60-100615-kb2128768-sh4.msi846,33615-Jun-201020:13
Wincepb60-100615-kb2128768-x86.msi801,28015-Jun-201020:13
Files that are included in this update package
Collapse this tableExpand this table
File nameFile sizeDateTimePath
Windows embedded ce 6.0_update_kb2128768.htm7,66815-Jun-201018:42100615_kb2128768
Flashmddcore.lib744,72608-Jun-201019:53Public\Common\Oak\Lib\Armv4i\Debug
Flashmddcore.lib586,43208-Jun-201019:53Public\Common\Oak\Lib\Armv4i\Retail
Flashmddcore.lib719,62008-Jun-201019:54Public\Common\Oak\Lib\Mipsii\Debug
Flashmddcore.lib558,70608-Jun-201019:54Public\Common\Oak\Lib\Mipsii\Retail
Flashmddcore.lib719,73808-Jun-201019:54Public\Common\Oak\Lib\Mipsii_fp\Debug
Flashmddcore.lib558,80608-Jun-201019:54Public\Common\Oak\Lib\Mipsii_fp\Retail
Flashmddcore.lib730,06008-Jun-201019:55Public\Common\Oak\Lib\Mipsiv\Debug
Flashmddcore.lib567,23008-Jun-201019:54Public\Common\Oak\Lib\Mipsiv\Retail
Flashmddcore.lib730,17808-Jun-201019:55Public\Common\Oak\Lib\Mipsiv_fp\Debug
Flashmddcore.lib567,33008-Jun-201019:55Public\Common\Oak\Lib\Mipsiv_fp\Retail
Flashmddcore.lib653,96408-Jun-201019:55Public\Common\Oak\Lib\Sh4\Debug
Flashmddcore.lib529,19608-Jun-201019:55Public\Common\Oak\Lib\Sh4\Retail
Flashmddcore.lib601,91008-Jun-201019:53Public\Common\Oak\Lib\X86\Debug
Flashmddcore.lib517,05808-Jun-201019:53Public\Common\Oak\Lib\X86\Retail
Back to the top | Give Feedback

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Back to the top | Give Feedback

MORE INFORMATION

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684
(http://support.microsoft.com/kb/824684/ )
Description of the standard terminology that is used to describe Microsoft software updates
Back to the top | Give Feedback

Properties

Article ID: 2128768 - Last Review: July 21, 2010 - Revision: 1.0
APPLIES TO
  • Windows Embedded CE 6.0 R3
Keywords: 
kbqfe kbfix kbexpertiseadvanced kbsurveynew KB2128768
Back to the top | Give Feedback

Give Feedback

 
Back to the topBack to the top