Article ID: 213544 - Last Review: October 10, 2006 - Revision: 4.2

XL2000: How to Delete Cells with a For Each...Next Loop

View products that this article applies to.
This article was previously published under Q213544
For a Microsoft Excel 2002 version of this article, see 291300  (http://support.microsoft.com/kb/291300/EN-US/ ) .
For a Microsoft Excel 98 version of this article, see 184378  (http://support.microsoft.com/kb/184378/EN-US/ ) .
For a Microsoft Excel 97 version of this article, see 159915  (http://support.microsoft.com/kb/159915/EN-US/ ) .

On This Page

Expand all | Collapse all

SUMMARY

Microsoft Excel 2000 deletes cells in a For Each...Next loop in a different way from versions of Microsoft Excel earlier than Excel 97.

This article describes the differences and provides a Visual Basic for Applications macro example that illustrates how to delete cells in a loop.
Back to the top

MORE INFORMATION

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
Back to the top

Sample Data

To use the macro in this article, type the following sample data in a worksheet: 
   A1:  a  B1:  1
   A2:  b  B2:  2
   A3:  x  B3:  3
   A4:  x  B4:  4
   A5:  c  B5:  5
   A6:  x  B6:  6
   A7:  d  B7:  7
   A8:  x  B8:  8
   A9:  x  B9:  9
   A10: e  B10: 10
Back to the top

Sample Macro

In a new macro module, type the following macro: 
Sub DeleteCells()

    'Loop through cells A1:A10 and delete cells that contain an "x."
    For Each c in Range("A1:A10")
        If c = "x" Then c.EntireRow.Delete
    Next

End Sub
Back to the top

Behavior of the Sample Macro in Microsoft Excel 2000

When you run the DeleteCells macro in Microsoft Excel 2000, only rows 3, 6 and 8 are deleted. Although rows 4 and 9 contain an "x" in column A, the macro does not delete the rows. The results of the macro in Microsoft Excel 2000 are as follows: 
   A1: a   B1: 1
   A2: b   B2: 2
   A3: x   B3: 4
   A4: c   B4: 5
   A5: d   B5: 7
   A6: x   B6: 9
   A7: e   B7: 10
When Microsoft Excel deletes row 3, all cells move up one row. For example, cell A3 assumes the contents of cell A4, cell A4 assumes the contents of cell A5, and so forth. After the For Each...Next loop evaluates a cell, it evaluates the next cell; therefore, when cells are shifted, they may be skipped by the loop.
Back to the top

Behavior of the Sample Macro in Microsoft Excel 5.0 and 7.0

When you run the DeleteCells macro in Microsoft Excel 5.0 and 7.0, the macro deletes all rows that contain an "x." The results of the macro in Microsoft Excel 5.0 or 7.0 are as follows: 
   A1: a   B1: 1
   A2: b   B2: 2
   A3: c   B3: 5
   A4: d   B4: 7
   A5: e   B5: 10
When row 3 is deleted, all cells move up one row; and cell A3 assumes the contents of cell A4, cell A4 assumes the contents of cell A5, and so forth.

However, unlike the behavior of the loop in Microsoft Excel 2000, when the For Each...Next loop evaluates a cell in Microsoft Excel 5.0 and 7.0, it reevaluates the cell if it is deleted in the loop; therefore, the cells are not skipped.
Back to the top

Recommended Method for Using a Loop to Delete Cells

Use the following macro when you want to use a loop to delete cells: 
Sub DeleteCells2()

    Dim rng As Range
    Dim i As Integer, counter As Integer

    'Set the range to evaluate to rng.
    Set rng = Range("A1:A10")

    'initialize i to 1
    i = 1

    'Loop for a count of 1 to the number of rows
    'in the range that you want to evaluate.
    For counter = 1 To rng.Rows.Count

        'If cell i in the range contains an "x",
        'delete the row.
        'Else increment i
        If rng.Cells(i) = "x" Then
            rng.Cells(i).EntireRow.Delete
        Else
            i = i + 1
        End If

    Next

End Sub
The results of this macro in Microsoft Excel 2000 and earlier versions are as follows: 
   A1: a   B1: 1
   A2: b   B2: 2
   A3: c   B3: 5
   A4: d   B4: 7
   A5: e   B5: 10
Back to the top

Additional Method for Using a Loop to Delete Cells

This is an alternate method to the method shown above. It produces the same results. 
Sub DeleteCells3()

    Dim rng As Range, i As Integer

    'Set the range to evaluate to rng.
    Set rng = Range("A1:A10")

    'Loop backwards through the rows
    'in the range that you want to evaluate.
    For i = rng.Rows.Count To 1 Step -1

        'If cell i in the range contains an "x", delete the entire row.
        If rng.Cells(i).Value = "x" Then rng.Cells(i).EntireRow.Delete
    Next

End Sub
Back to the top

REFERENCES

For more information about looping in a macro, in the Visual Basic Editor, click Microsoft Visual Basic Help on the Help menu, type Looping ThroughCode in the Office Assistant or the Answer Wizard, and then click Search to view the topic.
Back to the top
APPLIES TO
  • Microsoft Excel 2000 Standard Edition
Back to the top
Keywords: 
kbdtacode kbhowto kbprogramming KB213544
Back to the top
 

Get Help Now

Contact a support professional by E-mail, Online, or Phone

Article Translations