HOW TO: Specify a Specific or Third-Party HAL During Windows Setup

Article ID: 216251 - View products that this article applies to.
This article was previously published under Q216251
Notice
This article applies to Windows 2000. Support for Windows 2000 ends on July 13, 2010. The Windows 2000 End-of-Support Solution Center
(http://support.microsoft.com/?scid=http%3a%2f%2fsupport.microsoft.com%2fwin2000)
is a starting point for planning your migration strategy from Windows 2000. For more information see the Microsoft Support Lifecycle Policy
(http://support.microsoft.com/lifecycle/)
.
Notice
This article applies to Windows 2000. Support for Windows 2000 ends on July 13, 2010. The Windows 2000 End-of-Support Solution Center
(http://support.microsoft.com/?scid=http%3a%2f%2fsupport.microsoft.com%2fwin2000)
is a starting point for planning your migration strategy from Windows 2000. For more information see the Microsoft Support Lifecycle Policy
(http://support.microsoft.com/lifecycle/)
.
Expand all | Collapse all

On This Page

SUMMARY

This article describes how to specify a specific or third-party hardware abstraction layer (HAL) during Windows Setup.

Selecting a specific or third-party HAL during Setup should be necessary only if you have a HAL provided by a third party, or if Windows Setup does not detect your hardware correctly.

Note This procedure works only when installing from a CD-ROM. When installing from setup boot floppies, a problem in the installation program prevents the installation of a third-party HAL.

Selecting a HAL During Setup

  1. During the first phase of Setup, at the Setup is inspecting your computer's hardware configuration screen, press the F5 key.
  2. Select the appropriate HAL, or Select Other to specify a third-party HAL. The available HALs include:
    • ACPI Multiprocessor PC
    • ACPI Uniprocessor PC
    • Advanced Configuration and Power Interface (ACPI) PC
    • Compaq SystemPro Multiprocessor or 100% Compatible
    • MPS Uniprocessor PC
    • MPS Multiprocessor PC
    • Standard PC
    • Standard PC with C-Step i486
    • Other
  3. Continue with Setup to complete the installation.

Back to the top | Give Feedback

Properties

Article ID: 216251 - Last Review: October 30, 2006 - Revision: 4.3
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
Keywords: 
kbhardware kbhowtomaster kbsetup KB216251
Back to the top | Give Feedback

Give Feedback

 
Back to the topBack to the top