「 Microsoft Windows 安裝程式 」 工具的命令列參數

文章翻譯 文章翻譯
文章編號: 227091 - 檢視此文章適用的產品。
本文章的有 Microsoft Windows XP] 版本,請參閱 314881
注意事項
這份文件適用於 Windows 2000。Windows 2000 支援的結束 2010 7 月 13,Windows 2000 End-of-Support Solution Center 是規劃您的遷移策略,從 Windows 2000 的起點。如需詳細資訊請參閱 Microsoft Support Lifecycle Policy]。
全部展開 | 全部摺疊

結論

Windows 「 安裝程式可執行程式,會解譯封裝並安裝產品是找出 Msiexec.exe。本文列出此程式的命令列參數。您無法執行 Msiexec.exe 程式而不需指定至少一個參數。

其他相關資訊

Switch  Parameters                                Description
--------------------------------------------------------------------------
/i      Package|ProductCode                       Installs or configures a
                                                  product.

/f      [p|o|e|d|c|a|u|m|s|v]Package|ProductCode  Repairs a product. 

                                                  p - Reinstalls a
                                                  product only if a 
                                                  file is missing.

                                                  o - Reinstalls a
                                                  product if a file
                                                  is missing or if an 
                                                  older version of a file
                                                  is installed.

                                                  e - Reinstalls a
                                                  product if a file
                                                  is missing or an equal 
                                                  or older version of a 
                                                  file is installed.

                                                  d - Reinstalls a
                                                  product if a file
                                                  is missing or a 
                                                  different
                                                  version of a file is
                                                  installed.

                                                  c - Reinstalls a
                                                  product if a file 
                                                  is missing or the stored 
                                                  checksum value does not
                                                  match the calculated
                                                  value.

                                                  a - Forces all files to
                                                  be reinstalled.

                                                  u - Rewrites all
                                                  required user-
                                                  specific registry 
                                                  entries.

                                                  m - Rewrites all 
                                                  required
                                                  computer-specific 
                                                  registry entries.

                                                  s - Overwrites all 
                                                  existing shortcuts.

                                                  v - Runs from the source
                                                  file and re-caches the
                                                  local package.

/a   Package                                      Administrative
                                                  installation option.
                                                  Installs a product on 
                                                  the network.

/x   Package|ProductCode                          Uninstalls a product.

/j   [u|m]Package                                 Advertises a product.
     or [u|m]Package /t Transform List            The property values used
     or[u|m]Package /g LanguageID                 on the command line are
                                                  ignored.

                                                  u - Advertises a product
                                                  to the current user.
 
                                                  m - Advertises a product
                                                  to all users. 

                                                  g - Language ID.

                                                  t - Applies a transform
                                                  list to an advertised
                                                  package.

/l      [i|w|e|a|r|u|c|m|p|v|+|!]Logfile          Specifies the log 
                                                  file path and
                                                  indicates the flags 
                                                  to be logged.

                                                  i - Status messages.

                                                  w - Non-fatal warnings.

                                                  e - All error messages.

                                                  a - Startup of actions.

                                                  r - Action-specific
                                                  records

                                                  u - User requests.

                                                  c - Initial User
                                                  Interface (UI) 
                                                  parameters

                                                  m - Out-of-memory.
  
                                                  p - Terminal properties.

                                                  v - Verbose output.

                                                  + - Appends to the
                                                  existing file.
            
                                                  ! - Clears each line in
                                                  the log file.

                                                  "*" - Wildcard.
                                                  Logs all information,
                                                  but the use of the v
                                                  option is not included.
                                                  To include the v option,
                                                  type "/l*v."

/p   Patch/Package                                Applies a patch. To 
                                                  apply a patch to an 
                                                  installed Administrator
                                                  image, type the 
                                                  following options:

                                                  /p [PatchPackage]
                                                  /a [Package]

/q   n|b|r|f                                      Sets the UI level.

                                                  q , qn - No UI.

                                                  qb - Basic UI.

                                                  qr - Reduced UI. A modal
                                                  dialog box is displayed
                                                  at the end of the
                                                  installation.

                                                  qf - Full UI. A modal
                                                  dialog box is displayed
                                                  at the end of the
                                                  installation.

                                                  qn+ - No UI. However, a 
                                                  modal dialog box is
                                                  displayed at the end of
                                                  the installation.

                                                  qb+ - Basic UI. A modal
                                                  dialog box is displayed
                                                  at the end of the 
                                                  installation. If you 
                                                  cancel the installation, 
                                                  a modal dialog box is 
                                                  not displayed.

                                                  qb- - Basic UI with no
                                                  modal dialog boxes. 
                                                  The "/qb+-" switch
                                                  is not a supported UI 
                                                  level.

/y   module                                       Calls the system
                                                  Application Programming
                                                  Interface (API) 
                                                  DllRegisterServer, which
                                                  registers modules that
                                                  are typed on the 
                                                  command line (for
                                                  example, "msiexec /y
                                                  my_file.dll").

                                                  This option is only used 
                                                  for registry information
                                                  that cannot be added 
                                                  using the registry 
                                                  tables of the .msi file.

/z   module                                       Calls the system API 
                                                  DllUnRegisterServer,
                                                  to unregister modules 
                                                  that are typed on the
                                                  command line (for 
                                                  example, "msiexec /z 
                                                  my_file.dll").

                                                  This option is only used 
                                                  for registry information 
                                                  that cannot be removed 
                                                  using the registry 
                                                  tables of the .msi file.
				

?考

如需詳細資訊和範例,請參閱 Windows 安裝程式說明中的 < 命令列選項 > 主題,或請造訪下列 Microsoft 網站:
http://msdn2.microsoft.com/en-us/library/aa367988.aspx

屬性

文章編號: 227091 - 上次校閱: 2007年2月22日 - 版次: 3.5
這篇文章中的資訊適用於:
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
關鍵字:?
kbmt kbinfo KB227091 KbMtzh
機器翻譯
重要:本文是以 Microsoft 機器翻譯軟體翻譯而成,而非使用人工翻譯而成。Microsoft 同時提供使用者人工翻譯及機器翻譯兩個版本的文章,讓使用者可以依其使用語言使用知識庫中的所有文章。但是,機器翻譯的文章可能不盡完美。這些文章中也可能出現拼字、語意或文法上的錯誤,就像外國人在使用本國語言時可能發生的錯誤。Microsoft 不為內容的翻譯錯誤或客戶對該內容的使用所產生的任何錯誤或損害負責。Microsoft也同時將不斷地就機器翻譯軟體進行更新。
按一下這裡查看此文章的英文版本:227091
Microsoft及(或)其供應商不就任何在本伺服器上發表的文字資料及其相關圖表資訊的恰當性作任何承諾。所有文字資料及其相關圖表均以「現狀」供應,不負任何擔保責任。Microsoft及(或)其供應商謹此聲明,不負任何對與此資訊有關之擔保責任,包括關於適售性、適用於某一特定用途、權利或不侵權的明示或默示擔保責任。Microsoft及(或)其供應商無論如何不對因或與使用本伺服器上資訊或與資訊的實行有關而引起的契約、過失或其他侵權行為之訴訟中的特別的、間接的、衍生性的損害或任何因使用而喪失所導致的之損害、資料或利潤負任何責任。

提供意見

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com