Description of the Scanners and Cameras Installation Wizard

Article ID: 246666 - View products that this article applies to.
This article was previously published under Q246666
If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:
http://support.microsoft.com/default.aspx/w98?sid=460
(http://support.microsoft.com/?scid=http%3a%2f%2fsupport.microsoft.com%2fdefault.aspx%2fw98%3fsid%3d460)
Expand all | Collapse all

SUMMARY

This article describes the Scanners and Cameras Installation Wizard in Microsoft Windows Millennium.

MORE INFORMATION

Windows Millennium has a Scanners and Cameras Installation Wizard to help you install a digital camera, scanner, or other still image device that is not detected using Plug and Play. To install a still image device that is not detected using Plug and Play, follow these steps:
  1. Click Start, point to Control Panel, and then double-click Scanners and Cameras.
  2. Double-click Add Device, and then follow the steps displayed on the screen to complete the installation.
  3. Click Finish, and then click Close to close the Scanners & Cameras window.
NOTE: In order for the device to appear in the Scanners and Cameras folder, it must have a Windows Image Acquisition (WIA) compatible driver. Streaming cameras, sometimes called WebCams, may also appear under Scanners and Cameras if they use a WIA supported driver. If the device uses a WIA supported driver, the streaming camera can be used to capture a still image.

Properties

Article ID: 246666 - Last Review: January 25, 2007 - Revision: 2.1
APPLIES TO
  • Microsoft Windows Millennium Edition
Keywords: 
kbfaq kbinfo kbui KB246666
Retired KB Content Disclaimer
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Back to the top | Give Feedback

Give Feedback

 
Back to the topBack to the top