Poor Performance with Catalyst 2948G LAN Switch

Article translations Article translations
Article ID: 247609 - View products that this article applies to.
This article was previously published under Q247609
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

Symptoms

When you manually select the speed and duplex mode on a Cisco Systems Catalyst 2948G multi-layer local area network (LAN) switch, you may experience slow network performance with a Microsoft Windows 2000-based computer.

Resolution

To resolve this issue, if you manually set the switch to a certain speed or duplex mode, manually configure the network adapter to use the same settings.

Status

This behavior is by design.

More information

When you manually set the Catalyst 2948G to 10 Full, 10 Half, 100 Full, or 100 Half, you automatically disable NWAY autodetection of duplex mode. When the network adapter is set to Auto speed/Auto Duplex, the network adapter cannot detect the duplex mode of the switch, and therefore defaults to 10 Half duplex.

Properties

Article ID: 247609 - Last Review: October 26, 2013 - Revision: 2.0
Applies to
  • Microsoft Windows 2000 Server
Keywords: 
kbnosurvey kbarchive kbprb KB247609

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com