Article ID: 261643 - View products that this article applies to.
This article was previously published under Q261643
This article has been archived. It is offered "as is" and will no longer be updated.
After a computer resumes from hibernation, Universal Serial Bus (USB) devices may be missing. Device Manager may no longer list the connected USB devices.
When the computer resumes from hibernation, Windows 2000 issues a global reset and then a port reset to the USB controller. During this initialization, the port reset may not succeed and the USB controller may becomes unresponsive to any commands issued to it. This behavior may occur if the motherboard uses the 440BX/443BX chip set with the PIIX4(E) chip set.
To resolve this problem, obtain the latest service pack for Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
260910The English version of this fix should have the following file attributes or later:
(http://support.microsoft.com/kb/260910/EN-US/ )How to Obtain the Latest Windows 2000 Service Pack
Date Time Version Size File name ---------------------------------------------------- 12/5/2000 07:02p 5.0.2195.3055 32,272 Uhcd.sys
NOTE: There are various USB devices (mouse, keyboard) that may be unresponsive when the computer "wakes" from hibernation mode. In this case, the system will have to be restarted completely (turn off power and turn back on).
This behavior is not caused by a problem in Windows 2000. This hotfix is a workaround for computers that experience this condition. This problem was first corrected in Windows 2000 Service Pack 2.
For additional information about how to install Windows 2000 and Windows 2000 hotfixes at the same time, click the article number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/249149/EN-US/ )Installing Microsoft Windows 2000 and Windows 2000 Hotfixes
Article ID: 261643 - Last Review: October 20, 2013 - Revision: 3.4