Dynamic DNS Update Option Sent to DHCP Server Even If Disabled Globally

Article translations Article translations
Article ID: 263550 - View products that this article applies to.
This article was previously published under Q263550
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all

SYMPTOMS

Windows 2000-based clients that are using Dynamic Host Configuration Protocol (DHCP) may not receive IP addresses from non-Microsoft DHCP servers that do not recognize dynamic DNS update option 81. Disabling this option globally by setting the following value to 1 does not work:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DisableDynamicUpdate
This setting works correctly as a per-interface setting.

CAUSE

This behavior occurs because of a problem in the DHCP client service. It sends the dynamic DNS update option to the DHCP server whether or not you have disabled it globally.

RESOLUTION

To resolve this problem, obtain the latest service pack for Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
260910 How to Obtain the Latest Windows 2000 Service Pack
The English version of this fix should have the following file attributes or later:
   Date        Time    Version        Size    File name
   -------------------------------------------------------
   05/18/2000  07:35p  5.0.2195.2096  87,312  Dhcpcsvc.dll
				

WORKAROUND

To work around this behavior, set the option on a per-interface basis by clicking to clear the Register this connection's address in DNS check box on the DNS tab in the Advanced TCP/IP Settings dialog box for the interface.

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows 2000 Service Pack 2.

MORE INFORMATION

For additional information about how to install Windows 2000 and Windows 2000 hotfixes at the same time, click the article number below to view the article in the Microsoft Knowledge Base:
249149 Installing Microsoft Windows 2000 and Windows 2000 Hotfixes

Properties

Article ID: 263550 - Last Review: October 20, 2013 - Revision: 3.3
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
Keywords: 
kbnosurvey kbarchive kbhotfixserver kbqfe kbbug kbfix kbwin2000presp2fix KB263550

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com