How to troubleshoot an "Internal error" error message during the replication phase of dcpromo

Article translations Article translations
Article ID: 265090 - View products that this article applies to.
This article was previously published under Q265090
Expand all | Collapse all

On This Page

SUMMARY

This article describes how to troubleshoot an "internal error" error message that you may receive during the replication phase of the Active Directory Installation Wizard (Dcpromo).

MORE INFORMATION

During promotion, directory service objects are replicated in the order of the Update Sequence Numbers (USN) (low to high) for the schema, configuration and domain. Internal errors can occur when a parent container for replicated child objects does not exist in the local directory service.

This issue can occur in either of the following scenarios:
  • There is a live object whose parent was deleted in the past, and the parent has expired and has been converted to a phantom. Therefore, the child object can no longer be replicated out. The call to FillGuidAndSid for the parent object in ReplPrepareDataToShip does not succeed and an error is reported ( "8352 = ERROR_DS_NOT_AN_OBJECT"). This error causes the outbound replication of the child object to quit, and you receive a "replication internal error" message.

    If there is a live (or deleted) object with a phantom parent, Active Directory temporarily accepts the live object because of out-of-order replication requirements. Disk cleanup procedures, such as garbage collection, should not be able to convert a deleted object into a phantom if the parent has child objects. The Ntdsa.dll file in Service Pack 2 (SP2) prevents this situation in the directory service. However, this file does not fix the issue after it has already occurred.
  • You use the authoritative restore command when you are using beta versions (Release Candidate 2 [RC2] and earlier) of the Ntdsutil tool. Ntdsutil.exe increases the USN of specified containers and child objects in Active Directory. Beta versions of Ntdsutil.exe may incorrectly increase the USN for the Lost and Found container. When objects that are destined for the Lost and Found container are replicated before the container is created in the local directory service, the following event is reported:
    Event 1084: Replication failed with an internal error
    To avoid this scenario, the Lost and Found container is normally one of the first containers that is replicated.
Internal errors can also occur on existing Windows 2000 domain controllers during normal or administrator-initiated Active Directory replication.

How to troubleshoot this error message

To troubleshoot this error message, follow these steps:
  1. Use Network Monitor, event logs or the Dcpromo.log to locate the source server that is being used during Active Directory replication (when you are using the Active Directory Installation Wizard).
  2. If this error occurs when you are using Active Directory Installation Wizard and more than one potential replication partner exists, use the Active Directory Installation Wizard answer file to find the source server. Possible source domain controllers include domain controllers in the parent domain for new child domains, or domain controllers in the same domain for replicated domain controllers. Alternatively, if a specific source server is suspect, stop the Net Logon service on the suspect computer, and search from a different domain controller.
  3. On the source server, locate and click the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NTDS\Diagnostics
    and edit the following values:
    • 9 Internal Processing: Set the diagnostic level to 1.
    • 7 Internal Configuration: Set the diagnostic level to 3.
    • 5 Replication Events: Set the diagnostic level to 3.
  4. Use Registry Editor to export the \NTDS key from the source server to the computer that is being promoted (for example, Ntds.reg). Copy the file to the computer that is encountering the internal error when replication occurs. If the "internal error" message occurs when the Active Directory Installation Wizard is running, copy the .reg file to the desktop, or the Run menu on the problem domain controller so that the file can be easily started.
  5. When the computer that is being promoted starts replicating the schema naming context, run the Ntds.reg file to build the \NTDS\Diagnostics registry key and settings.

    WARNING The NTDS\Diagnostics registry key does not exist at this phase of promotion and must be manually created on the destination domain controller. If the NTDS\Diagnostics registry key is loaded too early when the Active Directory Installation Wizard is running, the key is overwritten with default values and no events are logged. For existing domain controllers, the registry settings can be enabled any time.
  6. Examine the directory service events logs on the source and destination servers. Internal events are displayed on the source server as "event ID 1173." Review NTDS replication events that occur before the internal error to locate the global universal identification (GUID) of the object that is being replicated (there may be back-to-back attempts to replicate the same object). Record the GUID for the problematic object or container.
  7. Start Ldp.exe, initiate a connection and bind against the source server. From the Browse menu, click Delete. For the distinguished name path, type <GUID=GUID#>, for example, <GUID=b2d605a4-b9e6-4505-ba59-895e91a9a7b5>. Set the search scope to Base, and then delete the specified GUID.
  8. Using Ldp.exe, set the value for the TombstoneLifetime attribute to 2 (the value in days before tombstoned objects are removed). TombstoneLifetime is located in the following distinguished name path:
    CN=Directory Service,CN=Windows NT,CN=Services,CN=Configuration,,DC=root domain,DC=COM
    Verify that the TombstoneLifetime attribute is present and its value is 2. If the value is less than 2, this value is invalid, and the server uses the default value of 60 days. (You can also use ADSIEDIT to change this attribute.)

    Note After you wait two days for the tombstoned objects to be removed, you may have to wait an additional 60 minutes or longer before you restart the domain controller and continue the garbage collection process.
  9. Initiate garbage collection on the source domain controller. Locate and click the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NTDS\Diagnostics key
    and edit the following values:
    • 6 Garbage Collection: Set diagnostic level to 3.
    • 9 Internal Processing: Set diagnostic level to 1.
    To force a garbage collection, restart the domain controller. Garbage collection should run 15 minutes after you restart the domain controller. The diagnostic levels now record garbage collection events in the directory service event log.
  10. To verify that the object has been deleted, run the following command:
    repadmin /showmeta "<"GUID for deleted object">"
    If you receive a "no such object" message, the object has already been successfully deleted, and you can now successfully run the Active Directory Installation Wizard. If the object has not yet undergone the garbage collection process, then there should be metadata for the isDeleted attribute. The time stamp associated with the isDeleted attribute is the deletion time. Verify that the deletion time is set for at least two days ago, for example:
    repadmin /showmeta "<GUID=b2d605a4-b9e6-4505-ba59-895e91a9a7b>"
  11. When this issue is resolved, reset the diagnostics logging levels to 0 and set the tombstone lifetime back to what it was previously, or remove the value altogether to prompt the computer to use the default values. The TombstoneLifetime setting is critical in defining the useful life of system state and Active Directory backups. When TombstoneLifetime is set to 2, backup tapes that are older than two days are unusable. Any domain controller that has been down for two or more days must be either restored from backup or reinstalled.
The following text is an example of the events that are reported in the directory service event log on the source and destination server.
Event Type: Information
Event Source: NTDS Replication
Event Category: Replication
Event ID: 1240
Date: MM/DD/YY
Time: HH:MM:SS AM|PM
User: S-1-5-21-1151542997-2719369742-1698538726-500
Computer: W2KSOURCE
Description:
Property 0 (objectClass) of object CN="NTDS Settings DEL:51c6913c-9221-4ac4-8513-9155dd7e15ad",CN="ZA9902000 DEL:37eabd48-bc98-483f-b2fd-9c8869e9c3ce",CN=Servers,CN=Bull,CN=Sites,CN=Configuration,DC=mma,DC=fr (GUID 51c6913c-9221-4ac4-8513-9155dd7e15ad) is being sent to DSA 6abec3d1-3054-41c8-a362-5a0c5b7d5d71.

Event Type: Warning Event Source: NTDS General Event Category: Internal Processing Event ID: 1173 Date: MM/DD/YY Time: HH:MM:SS AM|PM User: S-1-5-21-1151542997-2719369742-1698538726-500 Computer: W2KPROMO Description:   Internal event: Exception e0010002 has occurred with parameters 8442 and 20a0 (Internal ID 11003a1).


The following text is reported in the Active Directory Installation Wizard log on the computer that is being promoted. In this sample Dcpromo.log file, the computer that is being promoted, \\W2KPROMO, is encountering the "internal error" in the Active Directory Installation Wizard when it is sourcing from \\W2KSOURCE. Note the error 8442 that occurs while one of three naming contexts is being replicated ("The replication system encountered an internal error"). This example shows that the error occurs on the configuration naming context.
MM/DD HH:MM:SS [INFO] Replicating CN=Configuration,DC=win2ktest,DC=A,DC=com: received 917 out of 1783 objects.
MM/DD HH:MM:SS [INFO] Replicating CN=Configuration,DC=win2ktest,DC=A,DC=com: received 1049 out of 1783 objects.
MM/DD HH:MM:SS [INFO] Replicating CN=Configuration,DC=win2ktest,DC=A,DC=com: received 1181 out of 1783 objects.
MM/DD HH:MM:SS [INFO] Replicating CN=Configuration,DC=win2ktest,DC=A,DC=com: received 1200 out of 1783 objects.
MM/DD HH:MM:SS [INFO] Error - The Directory Service failed to replicate the partition CN=Configuration,DC=win2ktest,DC=A,DC=com from remote server W2KSOURCE.win2ktest.a.com. (8442)
MM/DD HH:MM:SS [INFO] NtdsInstall for win2ktest.a.com returned 8442
MM/DD HH:MM:SS [INFO] DsRolepInstallDs returned 8442
MM/DD HH:MM:SS [ERROR] Failed to install to Directory Service (8442)
MM/DD HH:MM:SS [INFO] Starting service NETLOGON<BR/>
MM/DD HH:MM:SS [INFO] Configuring service NETLOGON to 2 returned 0
MM/DD HH:MM:SS [INFO] Searching for the machine account for W2KPROMO on \\W2KSOURCE.win2ktest.a.com...
MM/DD HH:MM:SS [INFO] Configuring the server account<BR/>
MM/DD HH:MM:SS [INFO] NtdsSetReplicaMachineAccount returned 0
MM/DD HH:MM:SS [INFO] Attempted to move account W2KPROMO to CN=GAXGPTS01,CN=Computers,DC=win2ktest,DC=A,DC=com
					

Properties

Article ID: 265090 - Last Review: March 1, 2007 - Revision: 4.2
APPLIES TO
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Datacenter Server
Keywords: 
kbdcpromo kbenv kbinfo KB265090

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com