Information about the Calendar Checking Tool for Outlook (CalCheck)

The Calendar Checking Tool for Outlook (CalCheck) is a command-line program that checks the Microsoft Outlook calendar for problems. The tool opens an Outlook messaging profile to access the Outlook calendar. It performs various checks on general settings, such as permissions, free/busy publishing, delegate configuration, and automatic booking. Then, each item in the Outlook calendar folder is checked for known problems that can cause unexpected behavior, such as meetings that seem to be missing.

The CalCheck tool then generates a report that can be used to help diagnose problem items or identify trends.

Important

CalCheck reports include the following fields for meetings or appointments that are determined to be problematic:

  • Subject
  • Location
  • Start Time
  • End Time
  • Organize

Because these calendar item fields may contain personal information or details, we recommend that you first review all items in the CalCheck report before you share your report. See the More information section for additional fields that are found in CalCheck reports.

Perform calendar checking

To use CalCheck, the Outlook calendar must reside on a computer that is running Microsoft Exchange Server. The tool doesn't work with IMAP, POP3, or other non-Exchange email accounts.

Method 1: Use Microsoft Support and Recovery Assistant

Note

Microsoft Support and Recovery Assistant scenarios aren't available for new Outlook for Windows.

The Assistant fully automates all the steps required to perform Outlook calendar checking and is available in two versions. Use the version that suits your requirements.

Method 2: Manual installation

Go to the latest release, download and install the Calendar Checking Tool for Outlook.

Note

The 64-bit version of this tool is for use together with only the 64-bit version of Microsoft Outlook.

Checks that are performed

The Calendar Checking Tool performs two basic kinds of checks: Calendar-specific checks and item-level checks.

Calendar-specific checks

The following calendar-specific checks are run and then logged in the report:

Item-level checks

The following item-level checks are run and then logged in the report.

Error number Issue Solution
0001 The Items Recurrence Start Date or Time is set to 0 (year 1601). If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0002 The Items Recurrence Start Date or Time is earlier than January 1 1995. This isn't necessarily an error condition. You should delete or cancel the item only if it seems to be corrupted. By default, these items aren't moved when you use the -f argument. These are moved with calcheck -f only if you configure calcheck to treat warnings as errors per the .cfg file (WarningIsError=true).
0003 The Items Recurrence Start Date or Time is later than January 1 2025. This isn't necessarily an error condition. You should delete or cancel the item only if it seems to be corrupted. By default, these items aren't moved when you use the -f argument. These are moved with calcheck -f only if you configure calcheck to treat warnings as errors per the .cfg file (WarningIsError=true).
0004 The Items Recurrence Start Date or Time is past the upper limit. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0005 The Items Recurrence End Date or Time is set to 0 (year 1601). If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0006 Items Recurrence End Date or Time is earlier than January 1 1995. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0007 The Items Recurrence End Date or Time is later than January 1 2025. This isn't necessarily an error condition. You should delete or cancel the item only if it seems to be corrupted. By default, these items aren't moved when you use the -f argument. These are moved with calcheck -f only if you configure calcheck to treat warnings as errors per the .cfg file (WarningIsError=true).
0008 The Items Recurrence End Date or Time is past the upper limit. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0009 The Items Recurrence properties aren't created correctly. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0010 Appointments Recurrence data is empty. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0011 The dispidRecurring property is set to False or doesn't exist, but the dispidRecurType property isn't set to None. This indicates that the appointment is recurring. Therefore, the two properties are conflicting. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run c alcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0012 There's no Appointment Recurrence but dispidRecurring is set to True If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0013 The Recurrence Exception data mismatch. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0014 The Recurrence Original Start Date or Time is set before the start of the series. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0015 The Recurrence Original Start Date or Time occurs after the end of the series. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0016 The Start Date or Time is to Zero. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0017 The Start Date or Time is earlier than January 1 1995. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0018 The Start Date or Time is later than Jan 1 2025. This isn't necessarily an error condition. You should delete or cancel the item only if it seems to be corrupted. By default, these items aren't moved when you use the -f argument. These are moved with calcheck -f only if you configure calcheck to treat warnings as errors per the .cfg file (WarningIsError=true).
0019 The Start Date or Time is past the upper limit. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0020 The Appointment is missing the Start Time. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0021 The End Date or Time is to Zero. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0022 The End Date or Time is earlier than January 1 1995. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0023 The End Date or Time is later than Jan 1 2025. This might be intentional but may also indicate a problem. This isn't necessarily an error condition. You should delete or cancel the item only if it seems to be corrupted. By default, these items aren't moved when you use the -f argument. These are moved with calcheck -f only if you configure calcheck to treat warnings as errors per the .cfg file (WarningIsError=true).
0024 The End Date or Time is past the upper limit. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0025 This item is missing the Appointment End Time. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0026 This item is missing the required property dispidRecurring. -
0027 This item is missing the required property dispidApptTZDefStartDisplay. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0028 This item is missing the PR_SENT_REPRESENTING_NAME property. For more information about missing Organizer email addresses or display names, see Description of the Outlook 2013 hotfix package (Outlook-x-none.msp; Outlookintl-<Language-Code>.msp): October 16, 2013.
0029 This item is missing the PR_SENDER_NAME property. For more information about missing Organizer email addresses or display names, see Description of the Outlook 2013 hotfix package (Outlook-x-none.msp; Outlookintl-<Language-Code>.msp): October 16, 2013.
0030 There's no Organizer Address on this item. Check the PR_SENT_REPRESENTING properties on this item. -
0031 There's no Sender Address on this item. Check the PR_SENDER properties on this item. -
0032 There's no Subject on this item. You should add a Subject to this item. If you're the organizer, update the meeting to include a subject. If you're the attendee, ask the organizer to update the meeting to include a subject. Although this isn't an error condition, it makes it easier to troubleshoot any future issues that are related to the meeting.
0033 There's no Message Class for this item. If you have an issue with a meeting that doesn't have the default message class of IPM.Appointment, and if removing or canceling the meeting resolves the issue, you should determine which program is creating meetings by using that custom message class. You have to determine whether the program or add-in is a Microsoft or third-party application. If it's a third-party application, contact the third-party for support.
0034 The Message Class of this item isn't standard for a Calendar item and may indicate a problem. If you have an issue with a meeting that doesn't have the default message class of IPM.Appointment, and if removing or canceling the meeting resolves the issue, you should determine which program is creating meetings by using that custom message class. You have to determine whether the program or add-in is a Microsoft or third-party application. If it's a third-party application, contact the third-party for support.
0035 Missing required property PR_MESSAGE_CLASS. If you have an issue with a meeting that doesn't have the default message class of IPM.Appointment, and if removing or canceling the meeting resolves the issue, you should determine which program is creating meetings by using that custom message class. You have to determine whether the program or add-in is a Microsoft or third-party application. If it's a third-party application, contact the third-party for support.
0036 Unable to access the attachment table for this item. Error: <error code returned> If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0037 There are more than 25 attachments on this item. This may indicate a problem with exceptions on this recurring meeting. This isn't an error condition. However, for more information, see the 'Working with recurring meetings' section in this article: Best practices when using the Outlook Calendar.
0038 The Message Size Exceeds 50 MB. This may indicate a problem with attachments/exceptions/properties on this item. This isn't an error condition. However, for more information, see the 'Working with recurring meetings' section in this article: Best practices when using the Outlook Calendar.
0039 The Message Size Exceeds 25 MB. This may indicate a problem with attachments/exceptions/properties on this item. This isn't an error condition. However, for more information, see the 'Working with recurring meetings' section in this article: Best practices when using the Outlook Calendar.
0040 The Message Size Exceeds 10 MB. This may indicate a problem with attachments/exceptions/properties on this item. This isn't an error condition. However, for more information, see the 'Working with recurring meetings' section in this article: Best practices when using the Outlook Calendar.
0041 The SENT_REPRESENTING address doesn't match the Organizer Address from the Recipient Table. /RecipTable: /SentRepresenting: For more information, see Current issues with Microsoft Exchange ActiveSync and third-party devices.
0042 The organizer of this meeting is potentially incorrect. For more information, see Current issues with Microsoft Exchange ActiveSync and third-party devices.
0043 The dispidCleanGlobalObjectID property isn't populated on this item. -
0044 The dispidGlobalObjectID and the dispidCleanGlobalObjectID properties aren't populated on this item. -
0045 The dispidGlobalObjectID property isn't populated on this item. -
0046 The PidLidGlobalObjectId property values match on two items. For more information, see Instance of calendar appointment is missing or duplicated on ActiveSync client.
0047 The PidLidCleanGlobalObjectId property values match on two items. For more information, see: Instance of calendar appointment is missing or duplicated on ActiveSync client.
0048 The PidLidGlobalObjectId and PidLidCleanGlobalObjectId property values match on two items. For more information, see: Instance of calendar appointment is missing or duplicated on ActiveSync client.
0049 This item is duplicated in the Calendar. Check this item. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.

If the subject, organizer, location, recurring/single instance, and start/end times properties all match for two or more items, calc heck -f moves all duplicates except one.
0050 The Recipient Table has a bad or missing address type. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0051 The Recipient Table has a bad or missing email address. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0052 The Recipient Table has a bad or missing display name entry. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0053 The Recipient Table Organizer has a bad or missing email address property. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0054 The Recipient Table contains duplicated entries. Free Busy lookups could be affected. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0055 Item is missing required data in the dispidApptTZDefRecur property. If you're the organizer, you should change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see it in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0056 The dispidPropDefStream property is corrupted. This is a known problem that can cause Outlook to crash. For more information, see Outlook crashes when you open a meeting that contains Lync meeting details.
0057 The PropDefStream wasn't created correctly when calling MrMapi. Run CalCheck again to see whether the PropDefStream can be created correctly. If this error occurs again, then if you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0058 The Email address type isn't Exchange or SMTP. This could potentially cause performance problems on address lookups. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0059 Item is missing the required prop PR_MESSAGE_DELIVERY_TIME. If you're the organizer, change the Calendar folder view to a table view, find the appointment or meeting, and then cancel and re-create it. If you don't see in the list, run calcheck -f. If you're the attendee, you should contact the organizer and ask the organizer to cancel and then re-create the meeting.
0060 WARNING: Number of Recurring Appointments is greater than 1250. The maximum is 1300. To prevent hitting the limit, delete some older recurring appointments.
0061 ERROR: Number of Recurring Appointments reached the limit of 1300. To correct this, delete some older recurring appointments.
0062 Conflicting items in the Calendar. If you run calCheck -f , these conflicting items are moved.

Note

If you prefer not to have holiday items flagged, change the CalCheck.cfg file. CalCheck identifies an all-day event as a holiday if the Keywords named property includes the "holiday" string.

Current help and command-line switches

This section describes the command-line switches that are available to customize CalCheck behavior.

Usages

You can edit the CalCheck.cfg file to turn specific tests on or off.

CalCheck [-P <profilename>] [-O <path>] [-C <Version>] [-A] [-F] [-R] [-V]

CalCheck -?

  • P <Profile name> (if absent, prompts for profile)
  • O <Output Path> (path to put output files; the default path is the current directory)
  • C <Version> (load a specific MAPI version for the Click-to-Run version of Office 2016 or 2013)
  • A All calendar items output to CALITEMS.CSV
  • F Create CalCheck folder and move flagged error items there
  • R Put a Report message into the Inbox together with the CalCheck.csv file
  • V Verbose output to the command window
  • ? Print this message

Running the command creates CalCheck.log and CalCheckErr.csv files that show potential problems and items to fix or remove, plus processing information.

Examples

  • Default - Prompt for a profile, and process the mailbox in that profile:
    CalCheck

  • Process just the mailbox in "MyProfile":
    CalCheck -P MyProfile

  • Process a mailbox and move error items to the CalCheck folder in the mailbox, and place a report message in the Inbox:
    CalCheck -F -R

  • Process a mailbox based on a specific profile and version of MAPI for Click-to-Run versions of Office:
    CalCheck -C <Outlook version - like 2010, 2013, etc.> -P MyProfile

  • Print this message:
    CalCheck -?

Configuration file in CalCheck version 2

CalCheck version 2 (v2) now includes a CalCheck.cfg file. This file is located in the same folder in which CalCheck.exe is located. If the .cfg file is missing, CalCheck v2 displays an error message and doesn't run. The .cfg file is in plain text format. You can manually edit the file to enable or disable individual tests. By default, all tests are set to true. By default, all tests are run.

More information

CalCheck reports also contain the following fields from calendar meetings and appointments that are determined to be problematic.

Field Description
Is Past Item (true/false) Determines if the end time of the meeting or appointment occurred before or after the time CalCheck was ran.
Recurring (true/false) Specifies if the meeting or appointment is recurring or if it's a single instance.
Other Item Subject When duplicate items are found, the Other Item Subject describes the other item that is duplicated with the one in question so that you can find it in your calendar.
Other Item Start When duplicate items are found, the Other Item Start describes the other item's start time that is duplicated with the one in question so that you can find it in your calendar.
Other Item End When duplicate items are found, the Other Item End describes the other item's end time that is duplicated with the one in question so that you can find it in your calendar.
EntryID This is PR_ENTRYID of the calendar item.