How To Enable or Disable the Standby Mode

Article translations Article translations
Article ID: 274309 - View products that this article applies to.
This article was previously published under Q274309
Expand all | Collapse all

On This Page

SUMMARY

This article describes how to enable or disable the Standby mode on a computer that has Microsoft Windows Millennium Edition (Me) installed on it.

MORE INFORMATION

To manually put your computer in the Standby mode, use one of the following three methods:

NOTE: To put your computer in the Standby mode, your must have a computer that is set up by the manufacturer to support the standby power option.

Method 1: At Computer Shutdown (Desktop and Laptop)

  1. Click Start, and then click Shutdown.
  2. In the Shut Down Windows dialog box, in the What do you want the computer to do? box, click Standby.
  3. Click OK.

Method 2: Press Power Button (Desktop and Laptop)

To use the Power button to place your computer in the Standby mode, follow these steps:
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Power Options.
  3. In the Power Options Properties dialog box, click the Advanced tab.
  4. In the When I press the power button on my computer box, click Standby.
  5. Click OK or click Apply, and then press the Power button on your computer.

    NOTE: When you click Apply, your new setting are saved, but the Power Options Properties dialog box stays open. When you click OK, your new settings are saved, but the Power Options Properties dialog box closes.

Method 3: Close the Lid (Laptop)

To place your computer in the Standby mode by closing the lid to the computer, follow these steps:
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Power Options.
  3. In the Power Options Properties dialog box, click the Advanced tab.
  4. In the When I close the lid of my portable computer box, click Standby.
  5. Click OK or click Apply, and then close the lid of your laptop computer.
CAUTION: You must save your work before you put your computer into the Standby mode. While your computer is in the Standby mode, unsaved information in your computer's memory cannot be saved to the computer's hard disk. If your computer experiences an interruption in its power supply, all of the unsaved information stored in your computer's memory is lost.

NOTE: To disable the Standby mode or to change the power options, repeat the steps in method 2 or method 3 and select the power option that you want.

Properties

Article ID: 274309 - Last Review: January 29, 2007 - Revision: 1.3
APPLIES TO
  • Microsoft Windows Millennium Edition
Keywords: 
kbenv kbhardware kbhowto KB274309
Retired KB Content Disclaimer
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com