A hotfix rollup package (build 4.1.3461.0) is available for Forefront Identity Manager 2010 R2

Article ID: 2870703 - View products that this article applies to.
Expand all | Collapse all

On This Page

Introduction

A hotfix rollup package (build 4.1.3461.0) is available for Microsoft Forefront Identity Manager (FIM) 2010 R2. This hotfix rollup package resolves some issues that are described in the "More Information" section.

Update information

A supported update is available from Microsoft Support. We recommend that all customers apply this update to their production systems.

Microsoft Support

If this update is available for download from Microsoft Support, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix. Additionally, you can obtain the update from Microsoft Update or from Microsoft Update Catalog.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, go to the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Component update packages
The following table contains the component update packages that are included in the download from Microsoft Support.

Collapse this tableExpand this table
ComponentFile name
FIM 2010 R2 Add-ins and ExtensionsFIMAddinsExtensions_xnn_KB2870703.msp

Note Versions of this file are available for x86-based and x64-based versions of FIM 2010.
FIM 2010 R2 Add-ins and Extensions Language PackFIMAddinsExtensionsLP_xnn_KB2870703.msp

Note Versions of this file are available for x86-based and x64-based versions of FIM 2010.


FIM 2010 R2 Certificate Management
FIMCM_xnn_KB2870703.msp

Note Versions of this file are available for x86-based and x64-based versions of FIM 2010.
FIM 2010 R2 Certificate Management Bulk Issuance ClientFIMCMBulkClient_x86_KB2870703.msp
FIM 2010 R2 Certificate Management ClientFIMCMClient_xnn_KB2870703.msp

Note Versions of this file are available for x86-based and x64-based versions of FIM 2010.
FIM 2010 R2 Service and PortalFIMService_x64_KB2870703.msp
FIM 2010 R2 Service Portal Language PackFIMServiceLP_x64_KB2870703.msp
FIM 2010 R2 Synchronization Service FIMSyncService_x64_KB2870703.msp
FIM BHold SuiteBHOLD KB2870703.txt

Known issues in this update

FIM Synchronization Service

After this update is installed, rules extensions and custom management agents (MAs) that are based on Extensible MA (ECMA1 or ECMA 2.0) may not run and may produce a run status of "stopped-extension-dll-load." This issue occurs when you run such rules extensions or custom MAs after you change the configuration file for MIIServer.exe, Mmsscrpt.exe.config, or Dllhost.exe.config.

For example, you edit the MIIServer.exe.config file to change the default batch size for processing sync entries for the FIM Service MA. In this case, the synchronization engine installer for this update intentionally does not replace the configuration file. This is done to avoid deleting your previous changes. Because the configuration file is not replaced, entries that are required by this update are not present in the files, and the synchronization engine does not load any rules extension DLLs when the engine runs a Full Import or Delta Sync run profile.

To resolve this issue, follow these steps:
  1. Make a backup copy of the MIIServer.exe.config file.
  2. Open the MIIServer.exe.config file in a text editor or in Microsoft Visual Studio.
  3. Find the <runtime> section in the MIIServer.exe.config file, and then replace the content of the <dependentAssembly> section with the following:

    <dependentAssembly>
    <assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
     <bindingRedirect oldVersion="3.3.0.0-4.1.2.0" newVersion="4.1.3.0" />
    </dependentAssembly>
  4. Save the changes to the file.
  5. Find the Mmsscrpt.exe.config file in the same directory and the Dllhost.exe.config in the parent directory. Repeat steps 1 through 4 for both of these files.
  6. Restart the Forefront Identity Manager Synchronization Service (FIMSynchronizationService).
  7. Verify that the rules extensions and custom management agents now work as expected.
FIM Reporting

If you install FIM Reporting on a new server that has System Center Service Manager 2012 Service Pack 1 installed, follow these steps:
  1. Install the FIM 2010 R2 SP1 FIMService component. To do this, click to clear the Reporting check box.
  2. Install this hotfix rollup to upgrade the FIM Service to build 4.1.3461.0.
  3. Run the change-mode installation for the FIM Service, and then add Reporting.
If reporting is enabled and the change-mode installation is run for FIM Service and Portal, you must be re-enable reporting. To do this in the FIM Identity Management Portal, follow these steps:
  1. In the Administration menu, click All Resources.
  2. Under All Resources, click System Configuration Settings.
  3. Click the System Configuration Settings object, and then open the Properties of this object.
  4. Click Extended Attributes, and then select the Reporting Logging Enabled check box.
  5. Click OK, and then click Submit to save the change.

Prerequisites

To apply this update, you must have Forefront Identity Manager 2010 R2 (build 4.1.2273.0 or a later build) installed.

Restart requirement

You must restart the computer after you apply the Add-ins and Extensions (Fimaddinsextensions_xnn_kb2870703.msp) package. Additionally, you may have to restart the server components.

Replacement information

This update replaces the following updates:
2849119 A hotfix rollup package (build 4.1.3451.0) is available for Forefront Identity Manager 2010 R2

2832389 A hotfix rollup package (build 4.1.3441.0) is available for Forefront Identity Manager 2010 R2

2814853 A hotfix rollup package (build 4.1.3419.0) is available for Forefront Identity Manager 2010 R2

2772429 Service Pack 1 (build 4.1.3114.0) is available for Forefront Identity Manager 2010 R2

2750671 A hotfix rollup package (build 4.1.2548.0) is available for Forefront Identity Manager 2010 R2

2734159 A hotfix rollup package (build 4.1.2515.0) is available for Forefront Identity Manager 2010 R2

File information

The global version of this update has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Collapse this tableExpand this table
File nameFile sizeDateTime
Fimaddinsextensionslp_x64_KB2870703.msp3,924,48011-July-201308:04
Fimaddinsextensionslp_x86_KB2870703.msp1,594,36811-July-201308:01
Fimaddinsextensions_x64_KB2870703.msp5,201,92011-July-201308:04
Fimaddinsextensions_x86_KB2870703.msp4,659,71211-July-201308:01
Fimcmbulkclient_x86_KB2870703.msp9,097,72811-July-201308:01
Fimcmclient_x64_KB2870703.msp5,572,09611-July-201308:04
Fimcmclient_x86_KB2870703.msp5,197,31211-July-201308:01
Fimcm_x64_KB2870703.msp31,795,20011-July-201308:04
Fimcm_x86_KB2870703.msp31,406,08011-July-201308:01
Fimservicelp_x64_KB2870703.msp12,183,55211-July-201308:04
Fimservice_x64_KB2870703.msp31,186,94411-July-201308:04
Fimsyncservice_x64_KB2870703.msp36,161,02411-July-201308:04
BHOLD KB2870703.txt1,82626-July-201315:53


More information

Issues that are fixed in this update

This update fixes the following issues that were not previously documented in the Microsoft Knowledge Base.

FIM BHOLD Suite

Issue 1
When you create custom attributes in the BHOLD Core module that are linked to the Permission object type, an import of these permissions into the Metaverse (MV) does not synchronize the attribute values of the custom attributes.

To resolve this issue, run the SQL script in the BHOLD KB2870703.txt file that is contained in this hotfix rollup package against the B1 database.

FIM Synchronization Service

Issue 1
When the FIM Service Management Agent runs an export run profile that is configured to also log an audit file, no objects are exported to FIM Service.

Issue 2
The FIM Synchronization Service leaks memory during export when an ECMA2 Connector is used.

Issue 3
It takes a long time to save a new ECMA2 Connector that has a large schema.

Issue 4
ECMA2 Connectors that run in 32-bit mode cannot refresh the schema. This includes the Domino Connector as provided by Microsoft.

Issue 5
When you use the ECMA2 distinguished name (DN) capability that is not set as an anchor, the old DN is not present in the export entry if the DN is changed to a new value.

Changed behavior: The DN property always contains the old DN, and the new DN exists as an attribute update.

Issue 6
When you edit an existing ECMA2 Connector, you may receive the following error message in some scenarios:

Object reference not set to an instance of an object.

References

Properties

Article ID: 2870703 - Last Review: August 20, 2013 - Revision: 1.0
Applies to
  • Microsoft Forefront Identity Manager 2010 R2
Keywords: 
kbautohotfix kbqfe kbhotfixserver kbfix kbexpertiseinter kbsurveynew kbbug KB2870703

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com