Network Address Translation Mapping Is Not Successful and an Event ID 32003 Is Logged

Article translations Article translations
Article ID: 293497 - View products that this article applies to.
This article was previously published under Q293497
Expand all | Collapse all

SYMPTOMS

After you configure one-to-one address mapping in the Network Address Translation (NAT) in the Routing and Remote Access service, the client computers that are not included in the NAT may be unable to access the computer on the private network and the following error is logged to the System event log on the NAT server:
Event ID: 32003
Source: Ipnathlp
The Network Address Translator (NAT) was unable to request an operation of the kernel-mode translation module. This may indicate misconfiguration, insufficient resources, or an internal error. The data is the error code.

CAUSE

This problem can occur if your NAT address pool is configured so that the start address is the same as the end address and the mask is 255.255.255.255, for example:

Start address: 1.1.1.1
Mask: 255.255.255.255
End address: 1.1.1.1

RESOLUTION

To resolve this problem, change the mask of the address pool to the subnet mask that the external network uses.

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.

Properties

Article ID: 293497 - Last Review: March 2, 2007 - Revision: 2.3
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
Keywords: 
kbnat kbnetwork kbprb KB293497

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com