How to Use System Files to Create a Boot Disk to Guard Against Being Unable to Start Windows XP

Vertaalde artikelen Vertaalde artikelen
Artikel ID: 314079 - Bekijk de producten waarop dit artikel van toepassing is.
Dit artikel is eerder gepubliceerd onder NL314079
For a Microsoft Windows 2000 version of this article, see 101668.
Alles uitklappen | Alles samenvouwen

Samenvatting

This article describes how to guard against a situation when it is not possible to start Windows or any other operating system on your computer. This situation can occur when Windows is installed on a computer that has an Intel x86-based processor and the boot record for the active partition or files that are required to start Windows becomes corrupted.

Meer informatie

To guard against this situation, create a Windows boot disk when you first install Windows on the computer. This disk is different from an MS-DOS boot disk. Unlike MS-DOS, the entire Windows operating system cannot fit on one floppy disk. A Windows boot disk contains only the files that are necessary to start the operating system with the remainder of the Windows system files installed on the hard disk drive.

Use the following procedure to create this disk:

  1. Place a blank floppy disk in drive A, and format the disk by using Windows XP.
  2. From the root folder of the system partition of your hard disk drive (for example, C:\-), copy the following files to the floppy disk:
    Boot.ini
    NTLDR
    Ntdetect.com
    You may have to remove the hidden, system, and read-only attributes from the files.

  3. You may have to remove the hidden, system, and read-only attributes from the files. Restore the hidden, system, and read-only attributes to the files on your hard disk if you removed these attributes.
  4. You may have to remove the hidden, system, and read-only attributes from the files. If either the Bootsect.dos or the Ntbootdd.sys file resides in the system partition, also use the procedure that is described in steps 2 through 4 to copy these files to the boot disk.
If you format a floppy disk in Windows XP, the boot record points to the NTLDR file. When NTLDR runs, it loads the available operating system selections from the Boot.ini file. If you select Windows, NTLDR runs Ntdetect.com, and then passes control to Osloader.exe. If you select MS-DOS or OS/2, NTLDR loads Bootsect.dos.

Eigenschappen

Artikel ID: 314079 - Laatste beoordeling: donderdag 10 april 2003 - Wijziging: 1.0
De informatie in dit artikel is van toepassing op:
  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional Edition
Trefwoorden: 
kbinfo kbenv kbsetup kbusage KB314079

Geef ons feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com