Sign in with Microsoft
Sign in or create an account.
Hello,
Select a different account.
You have multiple accounts
Choose the account you want to sign in with.

The .NET framework version 2.0 Service Pack 2 (SP2) and earlier versions hardcoded the use of Secure Sockets Layer (SSL) v3.0 and Transport Layer Security (TLS) v1.0 by default unless a different protocol version was specified by the .NET application. This update for the .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 adds the option to use the SSL and TLS defaults that are provided by the operating system.

Note This content has been made available on Windows Update. To obtain the content, scan Windows Update for the latest .NET Framework updates. If your system is fully up to date via Windows Update, you do not need to take further action. 

Resolution

Download information

The hotfix that corresponds to KB3154517 has been superseded with the latest updates of .NET Framework, which contain all fixes that were previously included in KB3154517. It is recommended to install the latest updates of .NET Framework.

We have made the following improvements in this area:

  • The following registry keys can be set to use the operating system defaults for SSL and TLS instead of the hardcoded .NET Framework defaults for a managed application running on the computer.

    • For 64-bit operating systems:[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
      "SystemDefaultTlsVersions"=dword:00000001

      [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v2.0.50727]
      "SystemDefaultTlsVersions"=dword:00000001

    • For 32-bit operating systems:[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v2.0.50727]
      "SystemDefaultTlsVersions"=dword:00000001

    Note If the application has set the ServicePointManager.SecureProtocol in code or through config files to a specific value, or uses the SslStream.AuthenticateAs* APIs to specify a specific SslProtocols enum, the registry setting behavior does not occur.

  • In addition, we have added the SslProtocolsExtensions enumeration that you can use as an option for setting TLS v1.2, TLS v1.1, as well as operating system defaults for the ServicePointManager.SecurityProtocol property when targeting .NET framework version 2.0 SP2. (See the Developer Guidance section for the information on how to use the extensions.)

    Note Windows Vista SP2 and Windows Server 2008 SP2 do not support Transport Layer Security (TLS) protocol versions newer than 1.0. Managed .NET Framework 2.0 SP2 applications running on Windows Vista SP2 or Windows Server 2008 SP2 cannot use TLS 1.2 or TLS 1.1, even if those protocols are set in the ServicePointManager.SecurityProtocol property.


For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Developer Guidance

The definition of the new extensions are in the following files:
 

  • SecurityProtocolTypeExtensions.csnamespace System.Net
    {
    using System.Security.Authentication;
    public static class SecurityProtocolTypeExtensions
    {
    public const SecurityProtocolType Tls12 = (SecurityProtocolType)SslProtocolsExtensions.Tls12;
    public const SecurityProtocolType Tls11 = (SecurityProtocolType)SslProtocolsExtensions.Tls11;
    public const SecurityProtocolType SystemDefault = (SecurityProtocolType)0;
    }
    }

  • SslProtocolsExtensions.csnamespace System.Security.Authentication
    {
    public static class SslProtocolsExtensions
    {
    public const SslProtocols Tls12 = (SslProtocols)0x00000C00;
    public const SslProtocols Tls11 = (SslProtocols)0x00000300;
    }
    }

To include the support for TLS v1.2, include the source files in your project, and then set the protocol version by using the following methods:
 

  • Applications that are using ServicePointManager-based APIs can set the protocol by using the following:

    System.Net.ServicePointManager.SecurityProtocol = SecurityProtocolTypeExtensions.Tls12;

  • Applications that are using the SslStream AuthenticateAsClient(String, X509CertificateCollection, SslProtocols, Boolean) overload can set the SslProtocols value as SslProtocolsExtensions.Tls12.

If the registry setting that is mentioned in the first paragraph is set, and the SslProtocols value is set in the application as SslProtocols.None, the system default behavior that is chosen will depend on the Windows version.

Also, when you change the application code to enable support for TLS v1.2 with .NET Framework 3.5 SP1, you should make sure that you address the following exceptions on computers on which this patch is not deployed:
 

  1. If the hotfix is not installed, ServicePointManager-based APIs (HTTP, FTP, SMTP) will throw "System.NotSupportedException: The requested security protocol is not supported" when the application calls ServicePointManager.SecurityProtocol to set the new value.

  2. If the hotfix is not installed, SslStream-based APIs will throw exceptions when they call either of the AuthenticateAs* APIs:

    System.ArgumentException: The specified value is not valid in the 'SslProtocolType' enumeration.
    Parameter name: sslProtocolType

Note For SslStream only, a combination of Tls12, Tls11 with any of the existing Tls, Ssl3, Ssl2 (for example: Tls12 | Tls11 | Tls) will silently downgrade to the existing protocols (for example: Tls) on a system without the patch. It will connect to Tls without throwing the exception.
 

More Information

To enable TLS v1.1 or v1.2 as operating system defaults, follow the instructions at https://technet.microsoft.com/en-us/library/dn786418(v=ws.11).aspx#BKMK_SchannelTR_TLS12.

Note TLS v1.1 and v1.2 are not available in Windows Vista or Windows Server 2008.

If you have to disable the operating system defaults that are set by the registry key that is mentioned in the "Resolution" section for specific applications, you can do this by adding the following registry key:HKEY_LOCAL_MACHINE\SOFTWARE\[Wow6432Node\]Microsoft\.NETFramework\v2.0.50727\System.Net.ServicePointManager.SystemDefaultTlsVersions
<<Full path of the .exe for the file>> DWORD 0
C:\MyApp\MyApp.exe DWORD 0

For more information about TLS v1.2, see Introducing TLS v1.2.

After you enable the SystemDefaultTlsVersions .NET registry key, a different behavior occurs for each version of Windows, as shown in the following table.
 

Windows version

SSL2 Client

SSL2 Server

SSL3 Client

SSL3 Server

TLS 1.0 Client

TLS 1.0 Server

TLS 1.1 Client

TLS 1.1 Server

TLS 1.2 Client

TLS 1.2 Server

Windows Vista SP2 and Windows Server 2008 SP2

Off

On

On

On

On

On

N/A

N/A

N/A

N/A

Windows 7 SP1 and Windows Server 2008 R2 SP1

Off

On

On

On

On

On

Off

Off

Off

Off

Windows Server 2012

Off

Off

On

On

On

On

On

On

On

On

Windows 8.1 and Windows Server 2012 R2

Off

Off

On

On

On

On

On

On

On

On

Windows 10

Off

Off

On

On

On

On

On

On

On

On

Windows 10 (1511)

Off

Off

On

On

On

On

On

On

On

On

Windows 10 (1607) and Windows Server 2016

N/A

N/A

Off

Off

On

On

On

On

On

On

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Was this information helpful?

What affected your experience?
By pressing submit, your feedback will be used to improve Microsoft products and services. Your IT admin will be able to collect this data. Privacy Statement.

Thank you for your feedback!

×