Problems Using Basic 7.0/7.1 with Novell NetWare, DCA 10-Net

Confirmed QBX.EXE Hanging Report

• Microsoft Technical Support performed one test that showed that the QBX.EXE editor may hang under Novell Advanced NetWare version 2.15 revision C. This test was performed on an IBM AT with a 16-bit Ungermann Bass network card. The test was run on a nondedicated Novell server. The QBX.EXE editor screen comes up, but at this point, the machine hangs and requires a cold reboot.
  
  This information applies to the QBX.EXE editor that comes with Microsoft Basic PDS version 7.0 for MS-DOS.

Back to the top

Unconfirmed QBX.EXE Hanging Reports

• A customer reported that the QBX.EXE editor can hang under the following configuration:
  COMPAQ 386/20 or ALR 386/33 computer
  Version 2.15 Novell Advanced NetWare
  Micom Interland board NI52100TP-8
  Microsoft Mouse driver version 7.0
  When the customer booted without the Novell drivers, or with the Novell drivers and without the Microsoft Mouse 7.0 driver, QBX.EXE worked correctly without hanging. Microsoft has not confirmed this information.

• A customer reported that the QBX.EXE editor can hang under the following configuration:
  IBM PS/2 Model 50z computer
  Version 2.15 revision C Novell SFT network

• A customer reported that if both EMM386 and the version 2.2 Novell Netware were installed, the QBX.EXE editor hangs when you try to enter a second time and you are using the following configuration:
  AST 386SX computer
  Tiara LandCard
  Version 2.2 Novell NetWare
  EMM386
  When the customer removed either EMM386 or the Novell Netware, the QBX.EXE environment worked correctly.

• A customer reported that a Basic PDS 7.0 program using the OPEN COM statement may hang on a workstation connected to Novell Advanced NetWare version 2.15 revision A. When a Quarterdeck QEMM version 5.0 expanded memory driver was installed, the machine did not hang, but instead, QEMM returned an "Exception 12" error. When the software for the Novell network was removed, the computer did not hang, nor did it generate an Exception 12 error with the QEMM driver loaded. Microsoft has not confirmed this problem. The customer reported the problem on the following configuration:
  Dell System 310
  Novell Advanced NetWare version 2.15 revision A
  MS-DOS version 3.3
  80387 math coprocessor
  4 MB extended memory
  Video Seven VGA video card
  Phoenix 80386 ROM BIOS Plus version 1.1 A05
  Western Digital EtherCard Plus 16, or 3Com EtherLink card
• A customer reported an "Exception 12" error message after typing QBX at the command prompt when running the following software
  QEMM 6.0
  Novell Advanced Netware version 2.15
  on the following hardware:
  DTK keen-3332
  80386 33 MHz
  No math coprocessor
  8 MB extended memory
  DTR 386 ROM BIOS 4.26
  Networth EtherNext 16bit
  No error occurred when the machine was booted with a system disk.
• When Novell version 2.12 Advanced NetWare was loaded, one customer's computer hung when a Basic PDS program reached an OPEN COM statement to access the serial communications (COM1 or COM2) port. The program worked correctly when the Novell NetWare was not loaded. The customer was using MS-DOS 5.0 and a generic communications card on a Gateway 2000 386/25 MHz PC.
• A customer reported that the QBX.EXE editor hangs on the following configuration (customer did not test same program run from .EXE):
  Novell NetWare 2.15 SFT revision C
  Everex Step 386
  Version 3 AMI BIOS
  MS-DOS version 4.01
• A customer reported that QBX.EXE hangs on the following configuration (customer did not test same program run from .EXE):
  Novell SFT NetWare 286 version 2.15 revision B
  Unknown name AT 286
  1 MB RAM
  MDI graphics card (Hercules-compatible)
  MF-II keyboard MS-DOS 3.3

• A customer reported that the QBX.EXE editor hangs or reboots the PC when exiting QBX.EXE 7.1 on the following configuration:
  Novell NetWare 2.15 TTS
  Zircom Pocket Ethernet Adapter card (for laptops)

• One customer reported that the QBX.EXE 7.1 editor hangs with network drivers loaded for Novell 386 version 3.11 with a 3Com Etherlink II Network card. Another customer reported that QBX.EXE 7.1 hangs with Novell NetWare 3.11 on a Xircom Pocket Ethernet Adapter card.

Back to the top