Emulation Modes for Radio Shack Tandy Printers

Article translations Article translations
Article ID: 68732 - View products that this article applies to.
This article was previously published under Q68732
This article has been archived. It is offered "as is" and will no longer be updated.
Expand all | Collapse all


The following list outlines the available Tandy printers and their emulation modes. Consult the printer documentation to configure the printer for a particular emulation mode.
Printer          Primary Emulation        Secondary Emulation
-------          -----------------        -------------------
DMP-107          IBM Proprinter           Epson FX-80
DMP-134          IBM Proprinter           Epson FX-80
DMP-240          IBM Proprinter           Epson FX-80
DMP-300          IBM Proprinter XL24      Epson LQ2500
DMP-2102         IBM Proprinter XL24
DMP-430          IBM Graphics Printer

LP-950           HP LaserJet II
LP-1000          HP LaserJet Plus
Tandy DMP (dot matrix printers) models 106 and lower do not have a printer driver for Windows 3.0 or 3.1. Tandy suggests using the Generic Text Only (TTY) driver for models lower than 106. However, this driver will not work with all those models.

To obtain phone numbers for Tandy, query on the following words in the Microsoft Knowledge Base:
Tandy and phonebook


Article ID: 68732 - Last Review: February 27, 2014 - Revision: 2.1
  • Microsoft Windows 3.0 Standard Edition
  • Microsoft Windows 3.0a
  • Microsoft Windows 3.1 Standard Edition
  • Microsoft Windows 3.11 Standard Edition
kbnosurvey kbarchive KB68732

Give Feedback


Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com