"Error: 0x8004005" or "Error: 0x800C0005" error messages when you scan for updates

Article translations Article translations
Article ID: 843499 - View products that this article applies to.
Expand all | Collapse all

SYMPTOMS

When you visit the Windows Update Web site and then click Scan for updates, the result of the scan is zero percent. Additionally, you may receive one of the following error messages:
Error: 0x800C0005
Error: 0x8004005

CAUSE

This behavior may occur if certain dynamic-link library files (.dll files) are not registered correctly or if there is a firewall between the computer and the Internet that does not allow HTTPS (SSL) connections.

RESOLUTION

To resolve this behavior, use the regsvr32 command to reregister several .dll files:
  1. Click Start, click Run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following commands. Press ENTER after each line:

    regsvr32 Softpub.dll
    regsvr32 Wintrust.dll
    regsvr32 Initpki.dll
  3. Click OK.
  4. Restart your computer.

Properties

Article ID: 843499 - Last Review: November 1, 2006 - Revision: 2.2
APPLIES TO
  • Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
  • Microsoft Windows Server 2003, Standard Edition (32-bit x86)
Keywords: 
kbprb KB843499

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com