Article ID: 87165 - View products that this article applies to.
This article was previously published under Q87165
This article describes the command-line switches for Microsoft's CD-ROM Extension, Mscdex.exe, versions 2.21, 2.22, and 2.95.
Mscdex.exe is available from CD-ROM vendors, with the MS-DOS 6 Upgrade, 6.2 Upgrade, and 6.21 Upgrade, and with Windows 95/98.
Mscdex.exe is a CD-ROM "redirector." It hooks into the MS-DOS or Windows operating system the same way the network redirector does to obtain access to files that are not on local hard or floppy disks. As far as MS-DOS or Windows is concerned, CD-ROM drives look just like network drives. MSCDEX splices itself in front of the network redirector and takes requests belonging to CD-ROM drives and passes the rest to redirectors (such as network redirectors).
Command Line SwitchesThe following is the command line for MSCDEX.EXE:
MSCDEX.EXE: /D:x /M:n /E /V /L:x /S /KThe following table defines the MSCDEX.EXE command-line switches:
Switch Definition /D:<device name> - Allows you to specify a name for the device driver. This name must be identical to the device name used in the CONFIG.SYS file. /M:<n> - Specifies the number of sector buffers used to cache the path table of a CD-ROM disk. Typically, each drive should have a minimum of four to five buffers. The larger this number is, the less your computer will have to read directly from the CD-ROM drive. /E - Tells MSCDEX.EXE to use expanded memory if your system is using expanded memory. /V - Displays information on memory usage when you boot your PC. /L:<drive letter> - Allows you to specify the letter you want to assign to the first CD-ROM drive. /S - Allows the CD-ROM to be shared on MS-NET based systems. /K - Tells MSCDEX.EXE to use any KANJI (Japanese) file structures, if present, rather than the default of alphanumeric file structures.
Contact us for more help
Connect with Answer Desk for expert help.