Features that use detours or similar techniques to change the behavior of Microsoft SQL Server may cause the following issues:
- Performance problems
- Incorrect results
- Disk and memory corruption
- Loss of SQL Server response
- Unexpected process termination
- Inability to use standard diagnostics, such as the fn_get_sql function and the DBCC INPUTBUFFER command
- Increased chance of security issues
Microsoft does not provide support services for third-party features that use detours or similar techniques to change behavior of SQL Server. If you are working with SQL Server support services on a SQL Server issue, and it is identified that detours or similar techniques that change the behavior of SQL Server could be involved, the support professional will ask you to disable or to remove such detours or similar features as a troubleshooting step. Before additional troubleshooting can occur, the reported problem must be reproduced without any detour functionality present. Should the issue no longer occur, Microsoft may recommend that you contact the vendor for the third-party feature and continue troubleshooting with direction from that vendor.
Detours are powerful. Detours provide enhanced capabilities and a risk/reward tradeoff. Typically, when a detour is implemented in SQL Server, the applicable code is injected into the process space. SQL Server methods or functions are intercepted. This activity may change the basic performance behavior of SQL Server.
The following are some example situations and possible side effects:
- Incoming network traffic (TDS) packets are scanned and changed. The detour is added at a critical location at the net_readdata network process thread. Even some 100 CPU cycles at this location may significantly reduce batch rate throughput.
A change in the actual TDS data may lead to memory scribblers. This problem has triggered various SQL Server stability problems and in data corruption. Problems may cause a TDS packet to be partially changed and to replay garbage to SQL Server. Logging facilities at this level may expose passwords and other sensitive data that SQL Server tracing is designed to suppress and to help secure.
- SQL Server parsing routines are detoured to change behavior. The following are possible side effects:
- Execution plans do not match actual query text.
- A command is submitted only one time from the client. However, the command is executed multiple times.
- Trace output shows the original command instead of the altered query.
- The DBCC INPUTBUFFER command shows the original command instead of the altered query.
- The fn_get_sql function shows incorrect data. Additionally, the fn_get_sql function is susceptible to exceptions and to incorrect results. The fn_get_sql function is used by many monitoring solutions and may cause problems on the monitoring solutions.
- Overall User Mode Scheduler (UMS) and SQL Server Operating System (SQLOS) scheduling may be interrupted. This leads to loss of SQL Server response, to performance changes, and to outages.
- Win32 APIs that provide
enhanced security features are detoured. Depending on the implementation, logging
facilities at this level could expose passwords and other sensitive data. Overall UMS and SQLOS scheduling is interrupted. This leads to loss of SQL Server response and to outages.
The following example shows that the kernel32!GetQueuedCompletionStatus
function has been detoured.
In the assembly for the GetQueuedCompletionStatus
function, the first instruction has been replaced with a jump instruction.
0:038> u kernel32!GetQueuedCompletionStatus
77e660f1 e90a9f00aa jmp 21e70000 ß This points to an address that does not appear in the loaded module list (lm). It is injected code.
77e660f6 83ec10 sub esp,10h
The assembly for the injected code shows the detoured activity and a call to the MyDLL file.
0:038> u 21e70000
21e70000 55 push ebp
21e70001 8bec mov ebp,esp
21e70003 51 push ecx
21e70004 8b4518 mov eax,dword ptr [ebp+18h]
21e70007 50 push eax
21e70008 8b4d14 mov ecx,dword ptr [ebp+14h]
21e7000b 51 push ecx
21e7000c 8b5510 mov edx,dword ptr [ebp+10h]
21e7000f 52 push edx
21e70010 8b450c mov eax,dword ptr [ebp+0Ch]
21e70013 50 push eax
21e70014 8b4d08 mov ecx,dword ptr [ebp+8]
21e70017 51 push ecx
21e70018 e8234d19ee call MyDLL+0x4d40 (10004d40) <- Call to the MyDLL file.
21e7001d 8945fc mov dword ptr [ebp-4],eax
21e70020 8b55fc mov edx,dword ptr [ebp-4]
You can use Debugging Tools for Windows to determine whether detours are being used. To do this, follow these steps.Note
Always test this method before you try it in production. When you use Debugging Tools for Windows, the process may freeze when you run the commands. This behavior may adversely affect a production server.
- Attach Debugging Tools for Windows to SQL Server, or load a full user dump file.
- Issue the following debugger command. This command inspects each image against the on-disk image to determine whether detours have been injected.
!for_each_module "!chkimg -v @#Base -d"
- Detach the debugger.
To obtain Debugging Tools for Windows, visit the following Microsoft Web site:
If the in-memory image has been altered, the output may resemble the following:
Comparison image path: c:\program files\microsoft sql server\mssql\binn\ssnetlib.dll\ssnetlib.dll
Scanning section: .text
Range to scan: 0c261000-0c26eca8
0c263710-0c26371a 11 bytes - ssnetlib!ConnectionClose
[ 8b ff 55 8b ec 83 ec 10:68 00 00 00 00 e9 27 8a ]
0c2641e0-0c2641ea 11 bytes - ssnetlib!ConnectionReadAsync (+0xad0)
[ 8b ff 55 8b ec 83 ec 38:68 00 00 00 00 e9 00 7e ]
0c265160-0c26516a 11 bytes - ssnetlib!ConnectionWriteAsync (+0xf80)
[ 8b ff 55 8b ec 83 ec 28:68 00 00 00 00 e9 ba 70 ]
Total bytes compared: 56488(100%)
Number of errors: 33
33 errors : 0c260000 (0c263710-0c26516a)
You can review the assembly to look more closely at the issue, as follows:
0:038> u ssnetlib!ConnectionClose
0c263710 6800000000 push 0
0c263715 e9278ada03 jmp MyDLL!MyGetQueuedCompletionStatus <- A detour has been installed.
We recommend that you contact the provider of the detours or of the similar techniques for information about how to use the detours or similar techniques in SQL Server. For more information about detours and similar techniques, visit the following Microsoft Research Center Web site:
Article ID: 920925 - Last Review: January 10, 2013 - Revision: 3.0
- Microsoft SQL Server 2005 Express Edition
- Microsoft SQL Server 2005 Express Edition with Advanced Services
- Microsoft SQL Server 2005 Standard Edition
- Microsoft SQL Server 2005 Workgroup Edition
- Microsoft SQL Server 2005 Developer Edition
- Microsoft SQL Server 2005 Enterprise Edition
- Microsoft SQL Server 2005 Standard X64 Edition
- Microsoft SQL Server 2005 Enterprise X64 Edition
- Microsoft SQL Server 2005 Standard Edition for Itanium-based Systems
- Microsoft SQL Server 2005 Enterprise Edition for Itanium-based Systems
- Microsoft SQL Server 2000 Personal Edition
- Microsoft SQL Server 2000 Standard Edition
- Microsoft SQL Server 2000 Workgroup Edition
- Microsoft SQL Server 2000 Developer Edition
- Microsoft SQL Server 2000 Enterprise Edition
- Microsoft SQL Server 2008 Developer
- Microsoft SQL Server 2008 Enterprise
- Microsoft SQL Server 2008 Express
- Microsoft SQL Server 2008 R2 Datacenter
- Microsoft SQL Server 2008 R2 Developer
- Microsoft SQL Server 2008 R2 Enterprise
- Microsoft SQL Server 2008 R2 Express
- Microsoft SQL Server 2008 R2 Standard
- Microsoft SQL Server 2008 R2 Web
- Microsoft SQL Server 2008 R2 Workgroup
- Microsoft SQL Server 2008 Web
- Microsoft SQL Server 2008 Workgroup
- Microsoft SQL Server 2012 Developer
- Microsoft SQL Server 2012 Enterprise
- Microsoft SQL Server 2012 Express
- Microsoft SQL Server 2012 Standard
- Microsoft SQL Server 2012 Web
- SQL Server 2012 Enterprise Core
|kbtshoot kbexpertiseadvanced kbinfo KB920925|