Help and Support
 

powered byLive Search

How to extend the Windows Server 2008 evaluation period

View products that this article applies to.
Article ID:948472
Last Review:May 5, 2008
Revision:3.0
On This Page

SUMMARY

This article describes how to extend, or re-arm, the Windows Server 2008 evaluation period. The evaluation period is also known as the "activation grace" period. These instructions apply to any edition of Windows Server 2008. This includes evaluation copies.

Back to the top

INTRODUCTION

Evaluating Windows Server 2008 software does not require product activation. Any edition of Windows Server 2008 may be installed without activation, and it may be evaluated for 60 days. Additionally, the 60-day evaluation period may be reset (re-armed) three times. This action extends the original 60-day evaluation period by up to 180 days for a total possible evaluation time of 240 days.

Note In the Windows Server 2008 Evaluation DVD package, there is a 120-day initial evaluation period. You can extend the evaluation period to 240 days. To extend the initial evaluation and testing period, follow the steps in this Microsoft Knowledge Base article.

Back to the top

MORE INFORMATION

How to install Windows Server 2008 without activating it

1.Run the Windows Server 2008 Setup program.
2. When you are prompted to enter a product key for activation, do not enter a key. Click No when Setup asks you to confirm your selection.
3. You may be prompted to select the edition of Windows Server 2008 that you want to evaluate. Select the edition that you want to install.

Note After Windows Server 2008 is installed, the edition cannot be changed without reinstalling it.
4. When you are prompted, read the evaluation terms in the Microsoft Software License Terms, and then accept the terms.
5.When the Windows Server 2008 Setup program is finished, your initial 60-day evaluation period starts. To check the time that is left on your current evaluation period, run the Slmgr.vbs script that is in the System32 folder. Use the -dli switch to run this script. The slmgr.vbs -dli command displays the number of days that are left in the current 60-day evaluation period.

Back to the top

How to manually extend the evaluation period

When the initial 60-day evaluation period nears its end, you can run the Slmgr.vbs script to reset the evaluation period. To do this, follow these steps:
1. Click Start, and then click Command Prompt.
2. Type slmgr.vbs -dli, and then press ENTER to check the current status of your evaluation period.
3. To reset the evaluation period, type slmgr.vbs –rearm, and then press ENTER.
4. Restart the computer.
This resets the evaluation period to 60 days.

Back to the top

How to automate the extension of the evaluation period

You may want to set up a process that automatically resets the evaluation period every 60 days. One way to automate this process is by using the Task Scheduler. You can configure the Task Scheduler to run the Slmgr.vbs script and to restart the server at a particular time. To do this, follow these steps:
1.Click Start, point to Administrative Tools, and then click Task Scheduler.
2. Copy the following sample task to the server, and then save it as an .xml file. For example, you can save the file as Extend.xml. 
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
  <RegistrationInfo>
    <Date>2007-09-17T14:26:04.433</Date>
    <Author>Microsoft Corporation</Author>
  </RegistrationInfo>
  <Triggers>
    <TimeTrigger id="18c4a453-d7aa-4647-916b-af0c3ea16a6b">
      <Repetition>
        <Interval>P31D</Interval>
        <StopAtDurationEnd>false</StopAtDurationEnd>
      </Repetition>
      <StartBoundary>2007-10-05T02:23:24</StartBoundary>
      <EndBoundary>2008-09-17T14:23:24.777</EndBoundary>
      <Enabled>true</Enabled>
    </TimeTrigger>
  </Triggers>
  <Principals>
    <Principal id="Author">
      <UserId>domain\alias</UserId>
      <LogonType>Password</LogonType>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
  </Principals>
  <Settings>
    <IdleSettings>
      <Duration>PT10M</Duration>
      <WaitTimeout>PT1H</WaitTimeout>
      <StopOnIdleEnd>true</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>false</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <WakeToRun>true</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <DeleteExpiredTaskAfter>PT0S</DeleteExpiredTaskAfter>
    <Priority>7</Priority>
    <RestartOnFailure>
      <Interval>PT1M</Interval>
      <Count>3</Count>
    </RestartOnFailure>
  </Settings>
  <Actions Context="Author">
    <Exec>
      <Command>C:\Windows\System32\slmgr.vbs</Command>
      <Arguments>-rearm</Arguments>
    </Exec>
    <Exec>
      <Command>C:\Windows\System32\shutdown.exe</Command>
      <Arguments>/r</Arguments>
    </Exec>
  </Actions>
</Task>
3.In the sample task, change the value of the following “UserID” tag to contain your domain and your alias:
<UserId>domain\alias</UserId>
4.In the Task Scheduler, click Import Task on the Action menu.
5. Click the sample task .xml file. For example, click Extend.xml.
6.Click Import.
7.Click the Triggers tab.
8.Click the One Time trigger, and then click Edit.
9. Change the start date of the task to a date just before the end of your current evaluation period.
10.Click OK, and then exit the Task Scheduler.
The Task Scheduler will now run the evaluation reset operation on the date that you specified.

Back to the top

APPLIES TO
•Windows Server 2008 Enterprise
•Windows Server 2008 Standard
•Windows Web Server 2008
•Windows Server 2008 Datacenter
•Windows Server 2008 Datacenter without Hyper-V
•Windows Server 2008 Enterprise without Hyper-V
•Windows Server 2008 for Itanium-Based Systems
•Windows Server 2008 Standard without Hyper-V

Back to the top

Keywords: 
kbinfo kbhowto kbexpertiseadvanced KB948472

Back to the top

Article Translations

 

Related Support Centers

Other Support Options

  • Need More Help?
    Contact a Support professional by Email, Online or Phone.
  • Customer Service
    For non-technical assistance with product purchases, subscriptions, online services, events, training courses, corporate sales, piracy issues, and more.
  • Newsgroups
    Pose a question to other users. Discussion groups and Forums about specific Microsoft products, technologies, and services.