System TipThis article applies to a different operating system than the one you are using. Article content that may not be relevant to you is disabled.
Microsoft SQL Server 2005 hotfixes are created for specific SQL Server service packs. You must apply a SQL Server 2005 Service Pack 3 hotfix to an installation of SQL Server 2005 Service Pack 3. By default, any hotfix that is provided in a SQL Server service pack is included in the next SQL Server service pack.
Cumulative Update 1 for SQL Server 2005 Service Pack 3 (SP3) contains only hotfixes that were released in Cumulative Update 10 for SQL Server 2005 Service Pack 2 (SP2) and Cumulative Update 11 for SQL Server 2005 Service Pack 2 (SP2). These hotfixes are not included in SQL Server 2005 Service Pack 3.
Cumulative Update 1 for SQL 2005 SP3 is only intended as a post-service pack rollup for Cumulative Update 10 for SQL Server 2005 SP2 and Cumulative Update 11 for SQL Server 2005 SP2 customers who plan to upgrade to SQL Server 2005 SP3 and still keep the hotfixes from Cumulative Update 10 for SQL Server 2005 SP2 and Cumulative Update 11 for SQL Server 2005 SP2. No new hotfixes have been included in this cumulative update other than the hotfixes that were already released in Cumulative Update 10 and Cumulative Update 11.
Note
This build of the cumulative update package is also known as build 9.00.4207.
Important notes about the cumulative update package
SQL Server 2005 hotfixes are now multilanguage. Therefore, there is only one cumulative hotfix package for all languages.
One cumulative hotfix package includes all the component packages. The cumulative update package updates only those components that are installed on the system.
You must enable the SQL Server Management Object (SMO) extended stored procedures and the SQL Server Distributed Management Object (SQL-DMO) extended stored procedures before you apply the cumulative update package. For more information about the SMO and DMO XPs option, see SQL Server 2005 Books Online.
Note SQL Server 2005 Books Online notes that the default setting of these stored procedures is 0 (off). However, this value is incorrect. By default, the setting is 1 (on).
How to obtain Cumulative Update 1 for SQL Server 2005 Service Pack 3
A supported cumulative update package is now available from Microsoft. However, it is intended to correct only the problems that are described in this article. Apply it only to systems that are experiencing these specific problems. This cumulative update package may receive additional testing. Therefore, if you are not severely affected by any of these problems, we recommend that you wait for the next SQL Server 2005 service pack that contains the hotfixes in this cumulative update package.
If the cumulative update is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the cumulative update package.
Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific cumulative update package. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
Hotfixes that are included in Cumulative Update 1 for SQL Server 2005 Service Pack 3
Cumulative Update 1 for SQL Server 2005 Service Pack 3 includes the hotfixes that were included in Cumulative Update 10 for SQL Server 2005 Service Pack 2 and Cumulative Update 11 for SQL Server 2005 Service Pack 2.
For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
956854
(http://support.microsoft.com/kb/956854/
)
Cumulative update package 10 for SQL Server 2005 Service Pack 2
958735
(http://support.microsoft.com/kb/958735/
)
Cumulative update package 11 for SQL Server 2005 Service Pack 2
Microsoft Knowledge Base articles that discuss these hotfixes will be released as they become available.
For more information about the SQL Server bugs, click the following article numbers to view the articles in the Microsoft Knowledge Base:
Hotfixes that were included in Cumulative Update 10 for SQL Server 2005 Service Pack 2
Collapse this tableExpand this table
SQL Hotfix bug number
Knowledge Base article number
Description
50003959
FIX: Error message when SQL Server 2005 synchronizes a mirrored database: "Failed Assertion = 'result == LCK_OK'"
FIX: Error message when you run an MDX query in SQL Server 2005 Analysis Services after you install cumulative update 7 for SQL Server 2005 Service Pack 2: "The SQL Server Analysis Services (<InstanceName>) service terminated unexpectedly"
FIX: Error message when you try to install SQL Server 2005: "[Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it"
50003961
FIX: Error message when you run a query in SQL Server 2005 or in SQL Server 2008 by using a linked server to SQL Server 2000 after you change the login password: "Communication link failure"
FIX: You may obtain an incorrect result when you use a cursor to perform DML operations on a table that does not have a clustered index in SQL Server 2008 or in SQL Server 2005
FIX: When you download the Report Builder ClickOnce application of SQL Server 2005 Reporting Services or SQL Server 2008 Reporting Services, the Reportbuilder.chm.deploy file is downloaded as the text/html content type instead of the application/octet-str
50003968
FIX: Error message when you query the attribute members of a parent/child dimension in SQL Server 2005 Analysis Services: "Either you do not have permission to access the specified member, or the specified member does not exist"
FIX: When you run a query that contains a JOIN operation in SQL Server 2005, and the ON clause of the JOIN operator contains a LIKE predicate, the query runs slower than in SQL Server 2000
FIX: Error message when you run the snapshot agent on a replication of a stored procedure in SQL Server 2005 or in SQL Server 2008: "The Name property cannot have a value of @param_name for this version of SQL Server"
FIX: You receive an error message that the file is being used by another process when you try to rename or move an output file from a job in SQL Server Agent in SQL Server 2005
50003979
FIX: When you specify cell permissions for a role in SQL Server 2005 Analysis Services Service Pack 2, the execution time for MDX queries is much longer than in SQL Server 2005 Analysis Services Service Pack 1
50003986
FIX: An access violation occurs and the Analysis Services service stops when you concurrently run several MDX queries that run for a long time and that access the same cells in SQL Server 2005 Analysis Services
50003988
FIX: An access violation occurs when you display the execution plan for a query that selects a computed column from a remote table in SQL Server 2008 or in SQL Server 2005
FIX: The size of the SQL Server 2005 error log file or of the SQL Server 2008 error log file grows very quickly when query notifications are created and destroyed in a high ratio
50003963
FIX: An access violation occurs when you run a SQL Server 2005 Integration Services package that transfers data from a data flow source to a destination table
50003969
FIX: Error message when you use the Microsoft.AnalysisServices.Deployment utility to deploy a SQL Server 2005 Analysis Services or SQL Server 2008 Analysis Services database in silent mode: "OLE DB or ODBC error: Invalid authorization specification; 28000
FIX: MDX queries that use the EXCEPT function in the WHERE clause run much slower after you install a hotfix or a cumulative update whose version is later than the version of Cumulative Update 4 for SQL Server 2005 SP2
50003973
FIX: A query that performs multiple Clustered Index Seek operations or RID Lookup operations fails with an assertion in SQL Server 2005
FIX: Error message when you restore a transaction log for a database by using the STANDBY option in SQL Server 2005: "The transaction log for database '<DatabaseName>' is full"
FIX: A SQL Server Agent job that creates a ServerXMLHTTP object by using an ActiveX script remains in the Executing status and is never completed in SQL Server 2008 or in SQL Server 2005
FIX: A memory leak occurs when you repeatedly invoke a trigger that contains the RAISERROR statement by using a SQLCLR stored procedure in SQL Server 2005
FIX: Error message when you parse a query after you run the SET XACT_ABORT ON statement in SQL Server 2005: ".Net SqlClient Data Provider: A severe error occurred on the current command"
FIX: A peer-to-peer transactional replication does not replicate rows if you rebuild the index for a published table at the same time as you insert data in the published table in SQL Server 2005 or in SQL Server 2008
Hotfixes that were included in Cumulative Update 11 for SQL Server 2005 Service Pack 2
FIX: The full-text search engine stops responding intermittently, the CPU utilization is high, and all full-text queries are blocked when you use full-text search in SQL Server 2005
FIX: Error message when you install Cumulative Update 10 or Cumulative Update 9 for SQL Server 2005 Service Pack 2 on a drive that uses the FAT32 file system: "Unexpected Error Occurred"
FIX: When you run the ALTER TRIGGER statement for a trigger in a merge publication in SQL Server 2005, a change is not replicated to the subscriber database
FIX: Error message when you run an MDX query in SQL Server 2005 Analysis Services: "An unexpected error occurred (file 'mdpropertyset.cpp', line 1032, function 'MDRangePropertySet::Init'"
FIX: Error message when you create a WMI event alert by using the sp_add_alert stored procedure in a SQL Server 2005 cluster: "The @wmi_query could not be executed in the @wmi_namespace provided"
FIX: Error message when you run a query that selects a column of the xml data type in SQL Server 2005: "'?', hexadecimal value 0xDC55, is an invalid character"
FIX: Error message when you visit an ASP page that connects to an instance of SQL Server 2005 Analysis Services by using the MSOLAP90 provider: "The system cannot find the file specified"
FIX: Error message when you run two MDX queries on different connections at the same time in SQL Server 2005 Analysis Services: "Transaction errors: The lock operation ended unsuccessfully because of deadlock"
FIX: Error message when you try to shrink a database in SQL Server 2005 Service Pack 2: "File ID <FileID> of database ID <DatabaseID> cannot be shrunk as it is either being shrunk by another process or is empty"
FIX: Error message when you run the Snapshot Agent for a transactional replication that uses an Oracle 11g publisher in SQL Server 2005: "Msg 21613, Level 16, State 1, Procedure sp_IHsyncmetadata, Line 223"
FIX: When you replicate the execution of a stored procedure in a transactional replication in SQL Server 2005, some DML statements that should not be replicated are replicated to the subscribers
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
913089
(http://support.microsoft.com/kb/913089/
)
How to obtain the latest service pack for SQL Server 2005
Restart information
The SQL Server service must be restarted. The Setup program restarts the SQL Server service. You may have to restart the computer after you apply this cumulative update package.
Registry information
To use one of the hotfixes in this package, you do not have to make any changes to the registry.
How to uninstall the cumulative update package
To uninstall the cumulative update package, follow these steps:
In Control Panel, open
Add or Remove Programs.
Click
Change or Remove Programs.
To see all the updates for the SQL Server 2005 installation, click to select the
Show Updates
check box.
File information for the cumulative update package
This cumulative update package may not contain all the files that you must have to fully update a product to the latest build. This cumulative update package contains only the files that you must have to correct the issues that are listed in this article.
The English version of this cumulative update package has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.
Note Cumulative Update 1 for SQL Server 2005 Service Pack 3 does not contain the update for SQL Native Client. A stand-alone package of SQL Native Client is released together with Cumulative Update 1.
SQL Server 2005 Database Engine, 32-bit version
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
atxcore90.dll
2005.90.4207.0
23400
17-Dec-08
17:35
x86
chsbrkr.dll
12.0.9427.1
1682256
27-Oct-08
16:32
x86
chtbrkr.dll
12.0.9427.1
6110032
27-Oct-08
16:32
x86
fteref.dll
12.0.9427.1
446464
27-Oct-08
16:32
x86
infosoft.dll
12.0.9427.1
465744
27-Oct-08
16:32
x86
korwbrkr.dll
12.0.9427.1
68432
27-Oct-08
16:32
x86
langwrbk.dll
12.0.9427.1
133968
27-Oct-08
16:32
x86
microsoft.sqlserver.maintenanceplantasks.dll
9.0.4207.0
292712
17-Dec-08
17:39
x86
microsoft.sqlserver.replication.dll
2005.90.4207.0
1625448
17-Dec-08
17:39
x86
microsoft.sqlserver.smo.dll
9.0.4207.0
1603416
17-Dec-08
17:39
x86
microsoft.sqlserver.smoenum.dll
9.0.4207.0
218984
17-Dec-08
17:39
x86
microsoft.sqlserver.sqlenum.dll
9.0.4207.0
898904
17-Dec-08
17:39
x86
microsoft.sqlserver.webservicetask.dll
9.0.4207.0
96088
17-Dec-08
17:39
x86
msfte.dll
12.0.9427.1
2427728
27-Oct-08
16:32
x86
msftefd.exe
12.0.9427.1
64336
27-Oct-08
16:32
x86
msftepxy.dll
12.0.9427.1
93008
27-Oct-08
16:32
x86
msftesql.exe
12.0.9427.1
93008
27-Oct-08
16:32
x86
msir5jp.dll
5.0.2130.0
3157328
27-Oct-08
16:32
x86
msmdlocal.dll
9.0.4207.0
1.6E+07
17-Dec-08
17:39
x86
nlhtml.dll
12.0.9427.1
121680
27-Oct-08
16:32
x86
nls400.dll
5.0.7112.0
1.2E+07
27-Oct-08
16:32
x86
query.dll
12.0.9427.1
45904
27-Oct-08
16:32
x86
rdistcom.dll
2005.90.4207.0
642392
17-Dec-08
17:39
x86
snapshot.exe
9.0.4207.0
11096
17-Dec-08
17:40
x86
sqlaccess.dll
2005.90.4207.0
346984
17-Dec-08
17:40
x86
sqlagent90.exe
2005.90.4207.0
345960
17-Dec-08
17:40
x86
sqlservr.exe
2005.90.4207.0
2.9E+07
17-Dec-08
17:40
x86
sqlwep.dll
2005.90.4207.0
87400
17-Dec-08
17:40
x86
thawbrkr.dll
12.0.9427.1
203600
27-Oct-08
16:32
x86
xmlfilt.dll
12.0.9427.1
195408
27-Oct-08
16:32
x86
SQL Server 2005 Analysis Services, 32-bit version
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
microsoft.sqlserver.smo.dll
9.0.4207.0
1603416
17-Dec-08
17:39
x86
microsoft.sqlserver.smoenum.dll
9.0.4207.0
218984
17-Dec-08
17:39
x86
microsoft.sqlserver.sqlenum.dll
9.0.4207.0
898904
17-Dec-08
17:39
x86
msmdlocal.dll
9.0.4207.0
1.6E+07
17-Dec-08
17:39
x86
msmdspdm.dll
9.0.4207.0
198504
17-Dec-08
17:39
x86
msmdsrv.exe
9.0.4207.0
1.5E+07
17-Dec-08
17:39
x86
msmgdsrv.dll
9.0.4207.0
6046568
17-Dec-08
17:39
x86
msolap90.dll
9.0.4207.0
4302680
17-Dec-08
17:39
x86
SQL Server 2005 Reporting Services, 32-bit version
For more information about the list of builds that are available after SQL Server 2005 Service Pack 3, click the following article number to view the article in the Microsoft Knowledge Base:
960598
(http://support.microsoft.com/kb/960598/
)
The SQL Server 2005 builds that were released after SQL Server 2005 Service Pack 3 was released
For more information about the Incremental Servicing Model for SQL Server, click the following article number to view the article in the Microsoft Knowledge Base:
935897
(http://support.microsoft.com/kb/935897/
)
An Incremental Servicing Model is available from the SQL Server team to deliver hotfixes for reported problems
For more information about how to obtain SQL Server 2005 Service Pack 3, click the following article number to view the article in the Microsoft Knowledge Base:
913089
(http://support.microsoft.com/kb/913089/
)
How to obtain the latest service pack for SQL Server 2005
For more information about the new features in SQL Server 2005 SP3 and about the improvements in SQL Server 2005 SP3, visit the following Microsoft Web site:
For more information about the naming schema for SQL Server updates, click the following article number to view the article in the Microsoft Knowledge Base:
822499
(http://support.microsoft.com/kb/822499/
)
New naming schema for Microsoft SQL Server software update packages
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684
(http://support.microsoft.com/kb/824684/
)
Description of the standard terminology that is used to describe Microsoft software updates