P2V VMM2008

: 970921 - Vizualiza?i produsele pentru care se aplic? acest articol.
|
::

, .. , , ..



(P2V) Windows 2000 SP4 Windows, . P2V Windows (Windows PE) VMM ( ). Windows PE, P2V :
(3133) Virtual Machine Manager servername.domainname.com , Windows PE ( ). 15 . servername.domainname.com 15 , "".


, .



.: HP NC3163 Fast Ethernet.





1. setupapi.app.log "x:\windows\inf" WinPE.



2. , , Ethernet.



< excerpt="" from="" setupapi.app.log="">



>>> [DIF_SELECTBESTCOMPATDRV - PCI\VEN_8086 & DEV_1229 & SUBSYS_B1340E11 & REV_08\3 & 13C0B0C5 & 0 & 28]

>>> 14:31:58.828 2009 ., 03/24

cmd: wpeinit

DVI: ""

DVI: CoInstallers,

DVI: : 14:31:58.828

DVI: { }

! DVI: failed(0xe0000228)

DVI: { - exit(0xe0000228)}

! DVI: : !

! DVI: 0xe0000228: .

< section="" end="" 2009/03/24="" 14:31:58.828=""></>

< [exit="" status:="" failure(0xe0000228)]=""></>





3. , PnPID , NFO . PnPID , :

. START ::, "Msinfo32"( ) OPEN Ok..

. .

c. expandComponents:network :.

. .

, PnPID.

. PnPID , setupapi.app.log.

:



Fast Ethernet HP NC3163 [00000008]

Fast Ethernet HP NC3163

PNP PCI\VEN_8086 & DEV_1229 & SUBSYS_B1340E11 & REV_08\3 & 13C0B0C5 & 0 & 28



4. . , - HP.



http://H20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.JSP?prodNameId=407753&lang=en&CC=US&prodTypeId=329290&prodSeriesId=407751&taskId=135





5. Now we need to locate the correct WinPE driver from the hardware vendors site for the offline conversion. Since VMM2008 uses the version of WinPE from Windows Server 2008, you will want to first locate W2K8/Vista drivers for the installed adapter.VMM2008 R2 uses the versionof WinPE from Windows Server 2008 R2.



6. Here are the drivers available from the hardware vendor for this particular NIC. Note the absence of W2K8/Vista drivers.



Microsoft MS-DOS

Microsoft Windows 2000

Microsoft Windows NT 4.0

Microsoft Windows Server 2003:

Microsoft Windows Server 2003 for 64-bit extended systems





7. Here is where we're going to run into a bit of trouble with this particular NIC. The NIC is pretty old and the vendor doesn't provide any drivers for Vista or W2K8. We're going to have to try some older drivers and hopefully one of those will work, but it will be trial and error, plusit may end up that none of them are compatible with WinPE.



8. I selected the latest released driver for this adapter which happens to be for Microsoft Windows Server 2003 (cp009602) and downloaded it to the C:\HP directory. The contents of the driver download can be extracted by double clicking on it. It's always a good idea to extract the contents to a different folder than where the actual executable is.



Here are the extracted contents to the C:\HP\Flat folder

cp009602.xml

cp_data.xml

cpqsetup.exe

install.XML

n100w32.sec

n100325.sys

netcpqi.ini

nicdrvd.dll





9. Now we need to copy the contents of C:\HP\Flat to 'C:\Program Files\Microsoft System Center Virtual Machine Manager 2008\Driver Import' directory. Create a logical folder structure under the 'Driver Import' folder such as ...NIC\HP NC3163.The directory on R2 would be: 'C:\Program Files\Microsoft System Center Virtual Machine Manager 2008 R2\Driver Import'.



10. Then we're ready to start the P2V wizard again in SCVMM.



11. Select the Offline conversion. This is on the same screen where you select the drives to convert. This option is located near the lower left hand corner on this screen. Once expanded, select 'Offline conversion' and OK. The following screen is called 'Specify offline conversion options'. The default option is 'obtain IP automatically'but you'll want to change that to 'use the following IPv4'. This will automatically pull the IP information from the source and display it in a window that can be edited. Verify this information is correct and continue forward and complete the P2V wizard.



If the driver selected was the correct one, the P2V process should complete without any further problems. If it wasn't, then follow the same steps outlined above with another of the drivers from the hardware vendors site. Hopefully one will work with this version of WinPE and allow the P2V conversion to complete as expected.



Another option is to temporarily install another newer NIC in the server as a workaround just to get the server virtualized.



For information on the requirements for source computers for P2V conversions please refer to the following TechNet article:http://technet.microsoft.com/en-us/library/bb963740.aspx

MICROSOFT / , , - ( ) . . ..

, , / - , , , , , , , ..
. -, . , , . - , . , . .

: 970921 - : 29 2010 . - Revision: 2.0
.
  • Microsoft System Center Virtual Machine Manager 2008
  • Microsoft System Center Virtual Machine Manager 2008 R2 Workgroup Edition
:
kbrapidpub kbnomt kbmt KB970921 KbMtru
! , , . , , , KB . . , , , . , , . .
:970921

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com