Event ID 1, event ID 5, event ID 70, or event ID 113 may be logged in the System log on a computer that uses the iSCSI Software Initiator to connect to an iSCSI target device

Article translations Article translations
Article ID: 976072 - View products that this article applies to.
Expand all | Collapse all

On This Page

SYMPTOMS

On a computer that uses the iSCSI Software Initiator to connect to an iSCSI target device, the following Error events may be logged in the System log periodically or when the computer starts:
Log Name: System
Source: iScsiPrt
Event ID: 1
Task Category: None
Level: Error
Keywords: Classic
Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.
Log Name: System
Source: iScsiPrt
Event ID: 5
Task Category: None
Level: Error
Keywords: Classic
Description: Failed to setup initiator portal. Error status is given in the dump data.
Log Name: System
Source: iScsiPrt
Event ID: 70
Task Category: None
Level: Error
Keywords: Classic
Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data.
Log Name: System
Source: MSiSCSI
Event ID: 113
Task Category: None
Level: Warning
Keywords: Classic
Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *xxx.xxx.xxxx.xxxx 0003260 Root\ISCSIPRT\0000_0 .

Note This issue may occur in all versions of Windows Vista, Windows 7, Windows Server 2008, and Windows Server 2008 R2.

CAUSE

This issue occurs for one or more of the following reasons.

Cause 1

An iSCSI target device that is listed on the Favorite Targets tab of the iSCSI Initiator is no longer accessible. This may occur if the iSCSI target device name is changed, if the IP address is changed, or if the iSCSI target device is removed from the network.

Cause 2

The iSCSI target device has reached its limit for the number of incoming connections.

Cause 3

A transient network issue temporarily prevented connectivity to the iSCSI target device.

Cause 4

The network stack is not fully prepared when the initiator was trying to connect to persistent targets. The initiator will try to connect. When the network stack is fully prepared, the connection should be successfully established.

RESOLUTION

If you receive this error when the iSCSI target device that is listed on the Favorite Targets tab no longer exists, you can resolve this issue by removing the iSCSI target device from the list of favorite targets.

If you receive this error, and you cannot access an iSCSI target device that is still configured on the network, make sure that the client computer has network connectivity to the iSCSI target. Additionally, make sure that name resolution is working correctly.

If you have successfully connected to your iSCSI target device despite this error, it indicates that the connectivity issue was temporary. Therefore, you can safely ignore this Error event.

Properties

Article ID: 976072 - Last Review: September 29, 2009 - Revision: 1.0
APPLIES TO
  • Windows Vista Enterprise 64-bit Edition
  • Windows Vista Ultimate 64-bit Edition
  • Windows Vista Business
  • Windows Vista Business 64-bit Edition
  • Windows Vista Enterprise
  • Windows Vista Ultimate
  • Windows Server 2008 Datacenter without Hyper-V
  • Windows Server 2008 Enterprise without Hyper-V
  • Windows Server 2008 for Itanium-Based Systems
  • Windows Server 2008 Standard without Hyper-V
  • Windows Server 2008 Datacenter
  • Windows Server 2008 Enterprise
  • Windows Server 2008 Standard
  • Windows Server 2008 R2 Datacenter
  • Windows Server 2008 R2 Enterprise
  • Windows Server 2008 R2 Standard
  • Windows Web Server 2008 R2
  • Windows Web Server 2008
  • Windows 7 Enterprise
  • Windows 7 Enterprise N
  • Windows 7 Home Basic
  • Windows 7 Home Premium
  • Windows 7 Home Premium N
  • Windows 7 Professional
  • Windows 7 Professional N
  • Windows 7 Release Candidate
  • Windows 7 Starter
  • Windows 7 Starter N
  • Windows 7 Ultimate
  • Windows 7 Ultimate N
Keywords: 
kbexpertiseadvanced kbtshoot kbsurveynew KB976072

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com