Incorrect Resource Information Printed from Device Manager

Retired KB Content Disclaimer

View products that this article applies to.

This article was previously published under Q161765

Expand all | Collapse all

SYMPTOMS

When you print the system resources in Device Manager, incomplete or inconsistent information may be printed.

Back to the top

CAUSE

There have been changes in Configuration Manager that may cause system resource information to be printed incorrectly.

Back to the top

RESOLUTION

To view and print system resource information correctly, use the Hwdiag.exe tool on the OEM Service Release 2 (OSR2) CD-ROM. To do so, follow these steps:

Copy the Hwdiag.exe file from the Other\Misc\Hwtrack folder on the OSR2 CD-ROM to the Windows folder on your hard disk.
Click the Start button, and then click Run.
In the Open box, type hwdiag, and then click OK.

Back to the top

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Back to the top

APPLIES TO

Microsoft Windows 95

Back to the top

kbprb KB161765

Back to the top

Retired KB Content Disclaimer

This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.

Back to the top