When you try to copy a file in Windows Explorer to a Plus Hard Card XL II
drive, you may receive a blue error screen with the following error
message:
Disk Write Error, unable to write to drive <X>:, press any key to
continue
This error occurs despite the fact that the Plus Hard Card XL II drive is
visible in Windows Explorer.
Back to the top
The real-mode driver for the Plus Hard Card XL II is not being loaded in
the Config.sys file.
Back to the top
Use any text editor (such as Notepad) to edit the Config.sys file. Add the
following line to the file
device=<path>:\atdosxl.sys
where <path> is the path to the Atdosxl.sys file. After you save and close
the Config.sys file, restart your computer.
Back to the top
Microsoft is researching this problem and will post new information here
in the Microsoft Knowledge Base as it becomes available.
Back to the top
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Help and Support
