After you install and configure a CableTron T2015 Token Ring network
adapter in a Windows 95-based computer to work with a 4 Mbps Token Ring
network using the T2015.dos NDIS 2 driver, you find that you cannot access
the network after you restart the computer.
Back to the top
Setup places a parameter for ring speed in both the registry and the
Protocol.ini file. The NDIS 2 driver does not read the Protocol.ini file
for this parameter correctly and remains set at the factory-default speed
of 16 Mbps.
Back to the top
Use any text editor (such as Notepad) to edit the Protocol.ini file. Change
the line that reads
BANDWIDTH=1
to read:
BANDWIDTH=4
After you make this change, save and close the Protocol.ini file, and then
restart your computer.
Back to the top
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Help and Support
