When you try to undock a laptop computer with a PCMCIA card installed in
a Databook PCMCIA controller socket, you may receive the following error
message:
The computer failed to undock
Back to the top
To work around this problem, remove all PCMCIA devices from their sockets
before undocking the computer. After doing so, the Eject command on the
Start menu works correctly.
Back to the top
Microsoft is researching this problem and will post new information here
in the Microsoft Knowledge Base as it becomes available.
Back to the top
This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
Help and Support
