When you are using an Ositech Trumpcard PC card (Ethernet + modem) while
not connected to a network, you may receive an error message similar to
the following message during Windows 95 startup:
Your network adapter Ositech Trumpcard Ethernet Adapter is not working
properly. You may need to set it up again. For more information see the
Network Troubleshooter in Windows Help.
An exclamation point in a yellow circle may appear on the card in Device
Manager.
Back to the top
The Ositech Trumpcard shuts down power to the Ethernet portion of the card
to save battery power if no cable is connected to the network.
Back to the top
You can ignore the error message. If you want to disable the error message,
follow these steps:
| 1. | In Control Panel, double-click Network.
|
| 2. | Click the Ositech Trumpcard adapter, and then click Properties.
|
| 3. | Click the Advanced tab.
|
| 4. | In the Connector Type box, click the media (cable type) that you are
using.
|
| 5. | Click OK or Close until you return to Control Panel. When you are
prompted to restart the computer, do so.
|
Back to the top
The modem portion of the card continues to function when the error message
is received.
Back to the top
