Error Message: The Driver NT1003.SYS Is Not Compatible with Windows Me This article was written about products for which Microsoft no longer offers support. Therefore, this article is offered "as is" and will no longer be updated.
This article was previously published under Q269138 The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products. SYMPTOMS
When you attempt to upgrade your computer to Windows Millennium Edition (Me), you may encounter the following error message:
The Driver NT1003.SYS is not compatible with Windows Me. You must connect to http://www.nogatech.com/vfw/vfwupdate.htm to get the updated driver. After you have updated your driver, you can continue setup or read Hardware.txt on the Windows Me CD.
CAUSE
This can occur if you have a Universal Serial Bus (USB) Capture Device that uses the NT1003 chipset produced by Nogatech. A device known to use this chipset is the Belkin F5U207 Video to USB capture card.
RESOLUTION
Contact the manufacturer of the Video to USB Capture device connected to your computer or visit the Nogatech Web site.
WORKAROUND
To work around this message, use the Add/Remove Programs tool in Control Panel to remove the Belkin Components USB Videobus software, and then restart the Windows Me Setup.
STATUS
This behavior is by design.
| Article Translations
|
| United States | Change | | | All Microsoft Sites |
Help and Support
Back to the top
|
